Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 FTP (shielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
1 x Gigabit PoE+ sisendport 2 x Gigabit PoE väljundporti 2 x Gigabit-port 18W PoE võimsuse eelarve Lihtne veebipõhine haldusliides Toetab LACP, VLAN, QoS, STP, RTSP ja IGMP Snoopingi Voice VLAN VoIP-rakenduste jaoks Ribalaiuse juhtimine pordi kohta 10 Gbps lülitusvõimsus IEEE 802.1p QoS koos järjekordade ajastamise toetusega Kompaktne ventilaatorita disain Seinale paigaldatav metallist korpus 5-pordiline Gigabit PoE+ Powered EdgeSmart Switch koos PoE Pass Through'iga, mudel TPE-P521ES, saab toite PoE+ lülitist või injektorist, vahelduvvooluadapterit ei ole vaja. Sellel on kaks gigabitilist mitte-PoE-porti ja kaks gigabitilist PoE-porti selliste seadmete, nagu IP-kaamerad, VoIP-telefonid ja traadita juurdepääsupunktid, toiteks. Vähendades tarbetut lüliti keerukust, on see EdgeSmart lüliti varustatud ainult kõige sagedamini kasutatavate hallatavate lülitusfunktsioonidega. Lihtne veebipõhine kasutajaliides võimaldab hõlpsasti hallata VLANe, QoS-i ja seiret. Integreerimise paindlikkus Hallatavate funktsioonide hulka kuuluvad ligipääsu kontrollnimekirjad, VLAN, IGMP Snooping ja QoS paindlikuks võrguintegratsiooniks. PoE+ toiteallikaga Vahelduvvooluadapterit ei ole vaja - see kommutaator saab toite PoE+ lülitist või injektorist ning sellel on kaks gigabitilist mitte-PoE-porti ja kaks gigabitilist PoE-porti selliste seadmete nagu IP-kaamerad toiteks. EdgeSmart juhtimine Pakub hõlpsasti kasutatavat veebipõhist haldusliidest, mis vähendab lüliti konfigureerimise keerukust ja pakub kombinatsiooni sagedamini kasutatavatest SMB haldusfunktsioonidest, mis lihtsustab kasutuselevõttu. Pordid Üks gigabitine PoE+ sisendport, kaks gigabitist PoE väljundporti ja kaks gigabitist porti pakuvad 10 Gbps kommutatsioonivõimsust. PoE toide Kaks gigabitilist PoE läbipääsu porti, mille summaarne PoE-võimsuse eelarve on 18 W Kompaktne disain Kompaktse ja kerge korpuse disainiga lüliti sobib hästi lauaarvutite paigaldamiseks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. Võrguhaldus Lai valik võrgukonfiguratsioone on toetatud: 802.3ad linkide koondamine, 802.1Q VLAN, ribalaiuse kontroll, IGMP, loopback-tuvastus, portide peegeldamine, STP, RTSP ja 802.1p (QoS). Veaotsing Liiklusstatistika ja mugav kaabli diagnostikatest aitavad võrgu tõrkeotsingul. Korpus Kompaktne seinale paigaldatav metallist korpus LED-indikaatorid LED-indikaatorid edastavad pordi olekut
8 x Gigabit PoE+ ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules PoE power budget: 240W@48VDC or 124W@24VDC PoE alive check restarts unresponsive PoE powered devices 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024) TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. PoE Power A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Integration Flexibility Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Industrial Design Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Traffic Management Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Switching Capacity 20Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
The Gigabit Passive Ethernet Repeater (GPeR) is part of our new GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy Ethernet alternative.The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for highrise buildings, multi-apartment buildings, with many floors and sections, where very long Ethernet cables might be a problem.Maximium allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximium allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality). Specifications Gigabit Ethernet ports 2 PoE in 802.3af/at, 24 - 57 V PoE out Jumper selectable passive PoE Passthrough Max power consumption 2 W Operating temperature -40 to 70°C Use case 1: Extension of Ethernet link to up to 1,5 km if one side have PoE source (up to 3 km both sides of the link have PoE sources).Use case 2: Home user connects his WiFi AP to GPEN11, which then outputs PoE (Power over Ethernet), Ethernet is extended with GPeR units then on the roof you have a netPower series switch (coming later this year), which takes power from all the apartments (from GPEN11), after that the switch is connected to the uplink connection, for example with our 60 GHz series of device.
Throughput: 48 Forwarding rate: 1488 Packet buffer: 3.5 MAC address table size: 16000 Jumbo frame size: 9 Number of VLAN groups: 0 Power consumption: 15.7 Mean time between failures (MTBF): 336072 Weight: 0.76
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: must-valge
Tootegrupp: SWITCH - unmanaged LAN võrguseade arhitektuur: GigabitEthernet koos PoE 1000BaseT (RJ45) ports: 8 tk Toetatud protokollid ja standardid: PoE - Power over Ethernet võrgukiht: 2 arvutikorpuse tüüp: metal maksimaalne energiatarbimine: 60 vatti Standard tarvikud: toiteplokk Lisaandmed: väljund pinge värv: must andmeleht: Vendor Page
Fiber-to-Ethernet Converter UFiber Active Ethernet allows for easy media conversion from fiber to copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af and is compatible with all UFiber SFP Modules (power supply and SFP modules not included). The Convenience of Fiber UFiber Active Ethernet provides fiber connectivity to an RJ45 Ethernet device, which in turn provides 802.3af or 24V passive PoE to UFiber AE. Active Fiber to Customer’s Premises UFiber Active Ethernet provides data over long distances at high speed using fiber. Indoor Installation Use the included bracket to easily mount UFiber Active Ethernet on a wall. Fiber Type Active SFP Module Compatibility SFP or SFP+(All UFiber Modules) SFP Port Speed 1 Gbps PoE Input 24V Passive PoE802.3af PoE RJ45 Port Speed 10/100/1000 Mbps Mounting Wall
UVC-G3-F-C Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. Features: Low-profile installationRequires 2 1/8" inch cutoutIncludes drywall mounting anchorsIncludes retainer for ceiling tile mountOptional security screw locks camera to mount* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: must
The DIGITUS Industrial Gigabit Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit Switch can be used under the most adverse conditions.The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring.The simple plug and play system allows the Industrial Gigabit Switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit Switch is a flexible, cost-effective solution for the industrial environment.
QuMax for Teltonika RUTX09 Integrated outdoor multi band high power LTE directional antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUTX09 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It has embedded also GPS antenna. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
Integrated multi-band LTE omni antenna + WiFi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT240 or 230 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT240 or 230 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
