CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
Processor: Qualcomm CPU Interface: 2 Gigabit Ethernet Ports (WAN/LAN auto-sensing) per Deco unit Button: 1 Reset button on the underside External Power Supply: Power Cord Dimensions: 7.5 in. x 3.6 in. x 3.6 in. (190 mm x 90.7 mm x 90.7 mm) Antenna Type: 2 internal dual-band antennas per Deco unit Wireless Standards: IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency: 2.4 GHz and 5 GHz Signal Rate: 300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz Wireless Security: WPA-PSK/WPA2-PSK
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
Schutzkontakt-Steckdosenleiste, mit drei Anschlüssen, Überspannungsschutz bis zu 13.500 A, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Funktionskontrollleuchte, Stecksystem DE (Stecker-Typ F)
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
RUT360 is an updated version of our all-time best-seller RUT240. This compact industrial cellular router offers a possibility to connect to the internet using cellular, Wi-Fi, and wired networks. RUT360 is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi, and 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps. Unique programming, remote monitoring, and security features make RUT360 perfect for IoT and M2M applications, where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited. 4G LTE CAT 6 Cellular speeds up to 300Mbps with Carrier Aggregation WIFI 802.11 b/g/n WiFi COMPACTNESS Small size - easy integration anywhere DURABILITY Rugged aluminium housing SECURITY Firewall and numerous VPN services, including OpenVPN, IPsec, PPTP, L2TP & SSTP RMS Compatible with Teltonika Remote Management System
MR70X | Available bandwidth 1800 Mbps | Data transmission speed 1200 Mbps | Wi-Fi 6 | 1 WAN | 3x10/100/1000M | Antenna Type Omni-Directional | Antenna Gain 5 dB | Number of antennas 4 | Dimensions 208.8 × 171.6 × 41.7 mm
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
• 920 watts power supply unit • Improved failover of selected LANCOM access switches • Hot-swappable – can be applied during operation • 820 watts PoE power supply and 1,440 watts PoE power supply when used as a second PSU in boost mode • 720 watts PoE power supply for the LANCOM GS-4530XP (limited by the number of ports) • Input voltage: 110 VAC and 230 VAC • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C
Belkin NPA004BTBK. Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Jaoturi liidesed: 3.5mm, USB tüüp-C. Maksimaalne värskendussagedus: 20000 Hz, Toote värv: Must, USB Power Delivery kuni: 60 W. Pistiku tüüp: Tüüp C. Laius: 33 mm, ...
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
8 x Gigabit PoE++ ports (up to 95W) 8 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 440W PoE power budget 36Gbps switching capacity Internal power supply Sturdy 1U 19” rack mountable metal housing
Delock PCI Expressi kaart laiendab teie arvutit kahe välise USB 3.0 pordiga. Saate ühendada USB 3.0 seadmeid nagu nt. dokkimisjaamad, kaardilugejad, välised kõvakettad, hubid jne.
See toitejuhe võimaldab ühendada ja toita 2 SATA-kõvaketast toiteallika ühe SATA 15-pini pordi kaudu. Spetsifikatsioon - Toitepistik 2 x SATA kõvaketta jaoks - Ühendus: 15-pini SATA > 2 x SATA HDD - sirge - Kaabli gabariit: KAABEL: 18 AWG - Kaabli pikkus: umbes 15 cm
Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja on allapoole ühilduv Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x mini DisplayPort isane > 1 x DisplayPort isane - Sisend = mini DisplayPort; väljund = DisplayPort - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 32 AWG - Kaabli läbimõõt: umbes 5,5 mm - Vaskjuht - Varjestus - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: must - Pikkus koos pistikutega: ca 2 m Süsteeminõuded - Üks vaba mini DisplayPort-liitmik Pakendi sisu - Mini DisplayPort kaabel
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 34 AWG - Kaabli läbimõõt: ca 4,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 1 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
Der Netzwerkadapter Argus ST-7215 bietet eine hervorragende Performance und sorgt für schnellen Datendurchsatz. Der verbaute Intel® X540 Chipsatz entlastet den Hauptprozessor weitestgehend und sorgt so für einen schnellen Datentransfer bei niedriger CPU Auslastung. Standard Netzwerkadapter in Serverumgebungen nutzen dagegen oftmals die Rechenleistung des Hauptprozessors. Der Anschluss erfolgt durch einen RJ45-Port mit einer Geschwindigkeit von bis zu 10 Gbit/s.
The MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m Add this QSFP module for distances up to 100 meters to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power monitoring.
