Kiirem ja sujuvam 4G+ kiiruse ja kahesagedusliku WiFi-ga 4G+ Cat6 AC1200 traadita kahesageduslik Gigabit ruuter MB230-4G Sisesta oma Nano SIM kaart ja hakka kasutama Täielikult ühilduv FDD-LTE ja TDD-LTE-ga, et töötada enamiku teenusepakkujatega üle maailma. Sisesta Nano SIM kaart ja lülita ruuter sisse, et jagada oma 4G LTE-võrku mitme Wi-Fi-seadmega. Märkus: Veenduge, et teie SIM-kaart oleks lukustamata. Kui ei, siis saab: a. Seadistada ruuteri MERCUSYS rakenduse kaudu ja järgida rakenduse juhiseid SIM-kaardi avamiseks. b. Logida sisse ruuteri veebihaldusse ja minna Advanced > Network > PIN Management, et kinnitada. Too Wi-Fi sinna, kus seda vajad Naudi ületamatut mugavust ja mitmekülgsust ning kasuta kiiret ja stabiilset WiFi-ühendust, olenemata sellest, kas oled kodus või töötad eemalt. Ülikiire 4G+ Cat 6 kiirus usaldusväärseks Wi-Fi ühenduseks MB230-4G toetab 4G+ Cat 6, mis kasutab Carrier Aggregation tehnoloogiat, et saavutada ülikiire LTE kiirus kuni 300 Mbps allalaadimine ja 50 Mbps üleslaadimine. Samuti suudab see jagada kaheribalist Wi-Fi-võrku mängude, voogesituse ja muu jaoks. Jaga WiFi ühendust sõpradega Märkimisväärne hulk juhtmevabasid vidinaid ühildub selle 4G-ruuteriga. Kuni 64 samaaegset ühendust tahvelarvutitele, sülearvutitele, mobiiltelefonidele ja teistele seadmetele. Tugev ja stabiilne signaal Sisemised suure võimendusega antennid tugevdavad WiFi signaali, laiendavad ühenduse loomise ulatust ja suurendavad ruuteri tundlikkust. Saadaval WAN-ühenduse varundus Täisfunktsionaalse WAN/LAN-pordiga MB230-4G võib töötada ruuterina, mis ühildub kaabel-, fiiber- ja DSL-modemitega või pakkuda Internetti juhtmega seadmetele. Usaldusväärne juurdepääs on korraga kuni 64 seadmele. Märkus: Kui ruuter on seadistatud traadita ruuteri režiimile, saab seda kasutada WAN-pordina, ühendades selle DSL/kaabelmodemi või Etherneti pesaga. Selle režiimi muutmiseks vaadake juhiseid jaotises „Seadistage ruuter traadita ruuteri režiimis“. Lihtne seadistamine ja haldamine MERCUSYS rakenduse kaudu Seadista ja halda oma Wi-Fi võrku MERCUSYS rakenduse abil oma nutitelefonist (Android, iOS).
The DAP140 is a Teltonika industrial wireless access point with passive PoE-in, designed to enhance Wi-Fi coverage and performance in industrial environments. Featuring Wi-Fi 4 with Wi-Fi mesh and Fast Roaming, as well as dual RJ45 ports and support of up to 50 simultaneous connections, this wireless access point is integral in maintaining reliable connectivity. An integrated DIN rail bracket, 3-pin power connector, and industrial-grade aluminium housing make the DAP140 the ideal access point for industrial applications.
TP-LINK Gigabit Smart Switch TL-SG2210P is equipped with 8 Gigabit RJ45 ports and 2 SFP slots, all RJ45 ports support the PoE standard with total PoE power budget of 53 W and useful PoE power management features. The switch provides high performance, enterprise-level QoS, useful security strategies and rich Layer 2 management features.TP-LINK's Gigabit Smart Switch TL-SG2210P is especially designed for the small and medium business networks that require efficient network management. TL-SG2210P comes with a comprehensive set of features, such as link aggregation group, 802.1Q VLAN, Access Control Lists (ACL), Quality of Service (QoS L2 to L4), storm control and IGMP snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. What's more, its easy-to-use web management interface means faster setup and configuration with less downtime, providing the ideal solution for your business network.
UniFi Network Attached Storage with (2) 3.5" HDD bays, 2.5 GbE networking, USB-C connectivity, and an included PoE++ adapter, all in a compact footprint.
Teltonika Altos is a 5G Wi-Fi 7 router, engineered to deliver ultra-fast and future-ready mobile broadband for modern homes, small offices, and other Fixed Wireless Access (FWA) deployments. It provides reliable high-speed 5G connectivity where traditional fibre is unavailable or too costly. Running on the feature-rich Teltonika RutOS and fully managed by the Remote Management System (RMS), Altos balances next-generation speed and enterprise-grade security in an intuitive setup.
Wi-Fi 5 ACCESS POINT Equipped with dual-band technology, fast roaming, and an RJ45 port with PoE-in functionality, the Teltonika Networks TAP200 is a Wi-Fi 5 wireless access point designed to enhance Wi-Fi coverage in medium-density spaces where high network performance is essential. The TAP200 features an integrated mounting bracket for quick and easy installation, and a sleek design to seamlessly blend into retail, enterprise, or any other environment.Wi-Fi 5 Wave-2 802.11 b/g/n/ac Dual Band Wi-Fi RJ45 & POE-IN Supporting speeds of up to 1000 Mbps and PoE-in functionality RESILIENT & EASY TO INSTALL UV-stabilised housing for lasting colour with a mounting bracket for quick setup RMS MANAGEMENT Free RMS Management access for 24 months
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
NanoStation LocoM5, 5 GHz, 150+ Mbps, range 10+ km, 13 dBi, Pole Mounting kit included, Power method - Passive Power over Ethernet,airMAX,EU (LOCOM5(EU))
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Wireless Router, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz