Xiaomi Router AC1200 EU 802.11ac, 300 + 867 Mbit/s, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support No, MU-MiMO Yes, No mobile broadband, Antenna type 4 External Antennas
TX201 PCI-E 1x2.5Gb network card Amazing speed - 2.5 Gigabit Ethernet enables access to your multi-gigabit network. The TX201 is up to any task, whether it's local data transfer or internet access. Compatibility with lower standards - The high speeds and ultra-low latency of the 2.5GBase-T standard do not preclude support for devices that use less advanced technologies such as Fast Ethernet or Gigabit Ethernet. The network card automatically negotiates connection speeds. Low-Profile and Full-Height Herring - In addition to the standard herring, a low-profile herring is included with the product for mini tower PCs. Multi-operating system support - Compatibility with Windows 11/10/8.1/8/7, Windows Server 2022/2019/2016/2012/2008 R2 and Linux means the card can be used on a wide variety of devices. Incredible 2.5G network connectivity 2.5 Gigabit Ethernet achieves an incredible data transfer rate of up to 2.5 billion bits per second 2.5× more than the Gigabit Ethernet standard. The TX201 card is ready for any task, such as bandwidth-hungry local data transfer or Internet access. Home data storage available in seconds For local connections, the PCIe 2.5G network card helps build an instant transport channel between the central server and other equipment on the local network. Performing bandwidth-intensive activities at home or in the office won't be difficult, so the network can easily handle local data transmission as well. Extremely fast response Along with 2.5 Gigabit internet access, your gaming experience will become fully optimised with a huge increase in speed, lower latency and better responsiveness. Downloading games, smooth live streaming, huge backups via the cloud are simple and fast, as is character selection. Performance versatility proven by multi-standard compatibility 2.5GBase-T technology is compatible with standards that provide speeds of both 2.5Gb/s, 1Gb/s, 100Mb/s and 10Mb/s Base-T standards. The 2.5G Ethernet port automatically negotiates connection speeds, so you can easily connect to a 2.5G network when it is available. QoS support Quality of Service technology will make sure your bandwidth is always sufficient and lag-free. Stream content, play online games and enjoy smooth internet browsing.
The Ubiquiti repeater and transceiver module enhances and extends your network's reach. With its Ethernet 1000Base-BiDi connectivity, it provides a reliable, wired connection that supports high-speed data transfer rates of up to 1.25 Gbps. This plug-in module can extend the network coverage up to 3 km, making it suitable for larger spaces needing robust connectivity.Engineered for durability and safety, the module meets IEC/EN 60825-1:2014 Class 1 standards, ensuring it operates safely within a broad temperature range from 0°C to 70°C. Its LC single-mode connectors allow for seamless integration with existing network infrastructure, making it a versatile addition to any setup. Whether you're looking to enhance your network's performance or extend its reach, the Ubiquiti repeater and transceiver module provides a reliable solution.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
TSW040 on Teltonika 8-portiline haldamata PoE+ kommutaator, millel on kaheksa RJ45 porti, mille koguvõimsus on 240 W või kuni 30 W ühe pordi kohta. Sellel kompaktsel ja vastupidaval 8-portilisel kommutaatoril on ka 2-poolne toitesisend ja integreeritud DIN-kandur lihtsaks paigaldamiseks, mis muudab selle ideaalseks tööstuslikeks rakendusteks. TSW040-l on lai pingevahemik 7-57 VDC ja PoE-väljalülituse pingevahemik 44-57 VDC. 8 X POE-OUT RJ45Kaheksa PoE-out Ethernet-porti, mille koguvõimsuse eelarve on 240 W2-POOLNE TOITESISENDLihtne ja sobib tööstuslikeks rakendusteksINTEGREERITUD DIN-KÕVAKETTAGALihtne paigaldus plug-and-play kasutuselevõtuksLAI PINGEVAHEMIK7-57 VDC või 44-57 VDC PoE-väljalülitamiseks
TRB160 on ülimalt väike, kerge ja energiatõhus IoT-värav, mis on varustatud kriitilise tähtsusega LTE Cat 6, Gigabit Ethernet ja USB Type-C kaudu virtuaalse võrguliidesega, mis võimaldab samaaegselt toite ja võrguandmeid edastada. See IoT-värav suudab saavutada kuni 300 Mbit/s mobiilside kiiruse koos operaatoragregeerimisega paljudes rakendustes ja toetab mitmesuguseid tööstusklassi protokolle M2M-side jaoks.LTE CAT 6Kuni 300 Mbit/s mobiilikiirus koos operaatoragregeerimisegaUSB TYPE-CSamaaegseks toiteallikaks ja võrguandmete edastamiseksPROTOKOLLIDOPC UA, Modbus, Data to Server, MQTT, DNP3, DLMS ja muud.KOMPAKTSUSVäike suurus, lihtne paigaldus
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ - 9× gigabit RJ45 ports and 1× combo gigabit SFP/RJ45 port - Equipped with eight 802.3af/at PoE+ ports with up to 30 W for each port, the switch can transfer data and power via one single cable - Supports PoE power up to 123 W for all PoE ports* - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise
MS106LP 6-Port 10/100Mbps Desktop Switch with 4-Port PoE+ 6 Ports: 6× 10/100 Mbps RJ45 ports with 4 PoE+ ports Two Cables in One: With four PoE+ ports, transfers data and power on one single cable High Power PoE+: Support PoE Power up to 30 W for each PoE port and 40 W for all PoE ports 2× Uplink Ports: MS106LP provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode Isolation Mode: One click to divide traffic for specific ports for stability and security Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs Durable Metal Casing: Allows for efficient heat dissipation and long network life Plug and Play: Simple to use and saves time and effort PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
The Ubiquiti UniFi UACC-CABLE-PATCH-EL-1M-W is a reliable CAT 6 network cable designed for indoor use. This cable supports 2.5 Gigabit Ethernet, ensuring fast and efficient data transmission. The included translucent connector boots are molded for durability, while the PoE++ ready capability allows for seamless power delivery alongside data transmission, making this cable a suitable choice for various networking applications.With compliance to TIA/EIA-568-B.2 and VW-1 (UL1581), the Ubiquiti UniFi cable ensures safe and dependable performance. The Etherlighting technology enhances the overall function, making it suitable for both residential and commercial setups. Experience quality connectivity with this meticulously designed patch cable.
RUT206 on kompaktne tööstuslik ruuter, mis toetab RS232 ja RS485 jadaliideseid ning aktiivseid ja passiivseid PoE-sisendeid. Tänu vastupidavale konstruktsioonile, 2-poolusele toitesisendile ja microSD-pesa kaudu laiendatavale andmesalvestusele on see ideaalne valik mitmesuguste asjade interneti- ja M2M-rakenduste jaoks. See 4G Cat 4 ruuter on varustatud avatud lähtekoodiga RutOS-tarkvaraga ja toetab selliseid peamisi tööstuslikke protokolle nagu Modbus, DNP3 ja DLMS.ÜHENDUS4G Cat 4, 3G, 2GJADALIIDESEDRS232 ja RS485 jadakommunikatsiooniks2-POOLNE TOITESISENDLihtne ja sobib tööstuslike rakenduste jaoksPoEAktiivsed ja passiivsed PoE sisendid
The UniFi Access Reader Lite has been designed for convenient use and secure access. The PoE-powered reader is easy to install and supports the latest NFC security standards, including AES-128 encrypted MIFARE DESFire. Unlocking the door is quick and secure with an NFC card or with mobile app.
Use the passive PoE adapter TL-POE4824 to simultaneously supply power and transmit data to a passive PoE device. TL-POE4824 offers a convenient wall-mounting brackets to be easily installed on a wall.
The Zyxel XGS1935-28HP is a robust managed switch designed to enhance network performance with advanced Layer 3 Lite capabilities. With a forwarding capacity of 128 Gbps and a forwarding rate of 95.2 Mpps, this switch accommodates the needs of modern networks. The model features 24 10/100/1000 ports with Power over Ethernet (PoE+) capabilities and four 10 Gigabit SFP+ uplink ports, ensuring seamless connectivity and efficient power management for various devices.Designed to operate in a wide temperature range from -20°C to 50°C, the Zyxel XGS1935-28HP withstands extreme storage conditions between -40°C to 70°C. The switch supports features such as VLAN support, Quality of Service (QoS), IGMP snooping, and port security, making it versatile for different networking environments. With compliance to various industry standards and equipped with features like energy-efficient Ethernet, this managed switch is a choice for organizations looking to optimize their network infrastructure.
Zyxel GS-108B v5 ? 8-Port Gigabit Switch 8-port Gigabit switch with plug & play deployment QoS ports ensure stable traffic prioritization Fanless design for silent operation Durable metal housing with wall-mount option Energy-saving operation with IEEE 802.3az support Fast and easy networking for small businesses The Zyxel GS-108B v5 is an 8-port unmanaged Gigabit switch that seamlessly connects workstations, IP phones, storage, and other network devices. With plug & play functionality, it requires no configuration?just connect your devices and enjoy instant networking. QoS ports for prioritized and smooth data flow Four QoS ports (ports 5?8) on the GS-108B v5 are designed to handle critical traffic. Ports 5 and 6 offer medium priority, while ports 7 and 8 provide high-priority performance for demanding applications such as voice over IP. Silent and reliable build The passively cooled, fanless design ensures completely silent operation, making it perfect for noise-sensitive environments. Its sturdy metal housing improves heat dissipation and durability. The switch supports both desktop and wall-mounted installation. Smart energy efficiency built in Supporting IEEE 802.3az Energy Efficient Ethernet, the GS-108B v5 adjusts power consumption based on traffic levels. This enables significant energy savings without compromising network performance. 8 x 10/100/1000 Mbps RJ-45 ports QoS ports: 2 x medium (ports 5?6), 2 x high (ports 7?8) Switching capacity: 16 Gbps Forwarding rate: 11.5 Mpps MAC address table: 4K Packet buffer: 192 KB Jumbo frame support: up to 9 KB Fanless, passively cooled design Power consumption: max. 4.82 W Metal housing, desktop or wall-mountable Compliant with IEEE 802.3az Energy Efficient Ethernet Dimensions: 126 x 51.8 x 24 mm Weight: 0.176 kg
