Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
The Ubiquiti UniFi UMR-INDUSTRIAL is designed for reliable performance in extreme environments, making it a choice for industrial applications. With a wide operating temperature range from -40°C to 70°C and the ability to withstand humidity levels of 5 to 95%, this device operates effectively in various conditions. This versatile router supports both wireless and wired connectivity, featuring two WAN ports and internal antennas to ensure optimal signal strength. It adheres to multiple industry standards including IC, FCC, PTCRB, GCF, and ATT, ensuring compatibility and performance reliability in diverse networking scenarios.Equipped with advanced data link protocols, including Gigabit Ethernet and IEEE 802.11b/g/n, the Ubiquiti UniFi router facilitates high-speed data transmission with maximum throughput in the 2.4 GHz band. The external power adapter provides flexible power options, making it adaptable for different setups. Ideal for businesses and environments requiring robust networking solutions, this router stands out for its durability and performance, ensuring seamless connectivity where it is most needed.
Router BE11000 Gigabit Mesh Wi-Fi 7Â WR6500 1.0 A dual-band WiFi 7 router with an aggregate of 6.5 Gbps speed, and five Gigabit ports, catering to super-fast internet access, gaming, and entertainment scenarios. Broadcom 2 GHz Quad-Core CPU 6-Stream Dual-Band Wi-Fi 7 5765 Mbps + 688 Mbps Wi-Fi 5 x Gigabit Ethernet Ports Do 200 podĹÄczonych urzÄdzeĹ Obejmuje 140 m2 (1 500 ft2) z eFEM VPN Server and Client Cudy App, Cloud Control
Experience 2.5 Gb/s Speeds with Stable, Hassle-Free Connectivity The ASUS USB-C2500 V2 delivers ultra-fast and stable networking at speeds up to 2.5 Gb/s-2.5 times faster than standard gigabit network adapters. Compatible with USB-C and major operating systems, including Windows, macOS, and Linux, its an easy way to upgrade your NAS server, laptop, or desktop for faster and more reliable wired connections. Sleek, Compact Design for Easy Portability The ASUS USB-C2500 V2 is a compact and convenient network accessory for home, work, or travel. Its hand-sized design and built-in 10 cm cable make it easy to carry and use on the go. Whether youre working remotely, streaming media, or transferring data, it provides a reliable, space-saving solution for stable wired connectivity wherever you are. Instant Network Insight with LED Indicators The USB-C2500 V2 features intuitive LED indicators that allow you to easily check the network connection status at a glance. These LEDs provide real-time feedback, helping you quickly identify and troubleshoot network connectivity issues.
SWITCH LANBERG ILFE-4P-1GE-1S-90 POE 1XBT 3XAT SFP/ETH DIN UNMANAGMENT FAST ETHERNETLightweight unmanaged industrial switch Lanberg ILFE-4P-1GE-1S-90 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILFE-4P-1GE-1S-90 with a rich selection of portsThis switch is equipped with a port set optimized for CCTV/IoT installations: 4 x Fast Ethernet RJ45 PoE ports (10/100 Mb/s): 1× IEEE 802.3bt PoE++ (up to 90 W) + 3× IEEE 802.3af/802.3at PoE+. 1 x 1000BASE-T uplink (Gigabit Ethernet) - for traffic aggregation and connection to the network core / NVR / router. 1 x SFP slot (1000BASE-X) as a fiber uplink - optical parameters depend on the selected SFP module. Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. The technology based on 802.3af, 802.3at and 802.3bt standards allows powering peripheral devices with up to 120 W (90 W or 120 W depending on the model). A major benefit of the enhanced PoE standard is also high link quality and fast data transmission (up to 1 Gbps, depending on the model). Thanks to these capabilities, PoE is widely used in extensive surveillance networks. PoE+ and PoE++ enable real-time 4K camera streams while maintaining smooth performance.VLAN and EXTEND functionsVLAN helps with logical traffic separation (e.g., CCTV vs the rest of the network), improving order and limiting unwanted broadcast traffic. EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In practice, EXTEND can extend transmission and PoE powering up to 250 m on a single cable run (extend 250 m) in typical surveillance and distributed infrastructure deployments.An unmanaged switch that knows how to disconnect devicesIf too many devices are connected and the available PoE power reserve is exceeded, the switch will disconnect endpoints starting from the highest-numbered PoE ports down to the lowest until a safe power limit is restored. This makes it easy to plan for power spikes and define which devices are most critical and should stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to an integrated SFP slot. Optical transmission parameters depend on the selected SFP module. The switch also supports automatic MDI/MDIX, so crossover cables are not required, and it automatically detects and sets link speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention. This solution provides higher security and network stability.Easy installation in 19" racks and on a DIN railInstallation is fast and hassle-free thanks to Plug & Play operation. MDI/MDIX auto-detection recognizes the cable type, eliminating the need for crossover wiring and automatically setting link speed and transmission mode. Reliable packet forwarding with CRC checking (store-and-forward) is essential in IP surveillance systems. A major advantage is DIN-rail mounting, which gives flexible installation options both inside RACK cabinets and outside them.Metal enclosure for durability and wide operating temperature rangeA robust metal enclosure improves durability and supports stable continuous operation. The recommended ambient operating range is -25 to 65°C, with 10-90% humidity. While the enclosure is not water- or dust-tight, installed inside an appropriate outdoor/industrial housing it will perform very well in demanding indoor and outdoor environments such as factories, production plants, and industrial halls.
• Directional and Omnidirectional Antennas: Freely switch between modes via software for optimal signal control • Plug & Play Auto-Sensing Antennas: Automatically detects antenna changes and switches between internal and external antennas as needed • 4-Stream Dual-Band Wi-Fi 7: Up to 5.0 Gbps • 1× 2.5G PoE Port: Flexible PoE deployment reduces costs by delivering power and data over a single Ethernet cable • Outdoor-Ready Durability: Features an IP66-rated weatherproof enclosure and 6kV lightning protection • Quick and Easy Setup: Features wall/pole mounting with Omada SDN for one-click setup • Advanced Features: Centralized management, mesh, and seamless roaming
D-Link DUB-1312. Connector 1: USB Type A, Connector 2: RJ-45, Gender: Male/Female. Colour of product: Black, LED indicators: Activity, Link, Certification: CE, FCC. Maximum data transfer rate: 1 Gbit/s. Width: 7.44 cm, Depth: 2.1 ...
Tested according to Link Performance Class E, for up to 250 MHz UL certified Housing of steel sheet Shielded RJ45 female sockets, 8P8C 1U Cable installation via LSA strips, colour-coded as per EIA/TIA 568B Fixing option for cable ties, central ground connection.Portide hulk24Pistmik(ud)RJ45Toetatud kaablitüübidCat6Toote värvHallPüstikmontaažJahPüstiku mahutavus1UKaabliühendusLSA
Price/Performance Breakthrough The EdgeRouter™ 6P offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 6p can be rack-mounted with the use of the EdgeRouter Rack Mount Kit, model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 6P is supported and managed by UNMS™ (Ubiquiti® Network Management System), a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
CRS328-4C-20S-4S+RM The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. ARJ45 console port is available for management and debugging, and a mode button can be customised toexecute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STP / RSTP / MSTP• Access Control List• MikroTik neighbor discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• IEEE 802.3ad and static link aggregation Switching resultsCRS328-4C-20S-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-4C-20S-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: wire tracer, tester Lisaandmed: Location of the sought wires, Verification ja identification of wires ja their condition, Measurement ja test continuity of wires, Searching ja verification shorted wires, Testing of open circuits või short circuits function, DC level testing function, Finding ja statement of wires function, Automatic ja quick scan function, Earphone function, Volume adjusting function, Spotlight function, toiteplokk Netokaal: 0.42 kg
Cable length: 2 Other features: Length: 2m, AWG 26 (8*7*0.16mm), Conductor stranding: cord 7*0.16mm, HDPE conductor insulation: 0.98mm, With aluminum foil for each pair, With 80*0.12ALMG braid. LSZH external insulation: 6.0mm, Color: Black RAL9004, Operation up to 500Mhz, Compatibility with ANSI/TIA/EIA-568B standards, Packaging: string bag.
