300Mbps Enhanced Wireless N Router Maximum coverage – four 5dBi antennas provide up to 500m2 of wireless coverage Enhanced signal – high gain antennas dramatically increase wireless signal strength, size and stability 300Mbps wireless speed - ideal for HD streaming, online gaming, and large file downloads Easy installation - intuitive webpage guides you through the setup process in minutes *Range specifications are based on performance test results. Real performance varies in accordance with applications and environmental conditions.
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast Wi-Fi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds.† - High-Density Connectivity: 4× increased capacity to connect more devices simultaneously.‡ - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)§, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.? - PoE+ Support: Supports Power over Ethernet (802.3at) for convenient deployment and installation. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP620 HD Type Range Extender, Data transmission speed 1800 Mbps IEEE 802.11a, IEEE 802.11g IEEE 802.11n, IEEE 802.11ac IEEE 802.11ax, 1x10/100/1000M Antenna Type Built-in, Colour White Dimensions 243 × 243 × 64 mm
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all! - With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds. - A Deco M4 three-pack delivers Wi-Fi to an area of up to 5,500 square feet (US version). And if that’s not enough, simply add more Decos to the network anytime to increase coverage. - Deco M4 provides fast and stable connections with speeds of up to 1167 Mbps and works with major internet service provider (ISP) and modem. - Deco can handle traffic from even the busiest of networks, providing lag-free connections for up to 100 devices. - Parental Controls limits online time and block inappropriate websites according to unique profiles created for each family member. - Setup is easier than ever with the Deco app there to walk you through every step. Wireless Router 3-pack, Available bandwidth 1200 Mbps
TAP100 on Teltonika Networks'i esimene juurdepääsupunkt, mis sobib ideaalselt Wi-Fi leviala tugevdamiseks väikestes ettevõtetes ja äriruumides. See PoE-in pääsupunkt saab oma RJ45 pordi kaudu toite aktiivsetest PoE-seadmetest ning on projekteeritud lihtsust ja paigaldusmugavust silmas pidades. POE-IN Saab RJ45 pordi kaudu toite PoE-seadmetest SLEEK DISAIN UV-stabiliseeritud plastikust korpus, mis sulandub keskkonda LIHTNE PAIGALDAMINE Integreeritud kinnitusklamber lihtsaks paigaldamiseks laes RMS HALDAMINE Tasuta juurdepääs RMS Managementile 24 kuu jooksul
The TP-Link Omada EAP772 V1 is a sophisticated wireless access point technology, crafted to cater to the needs of modern businesses and high-density environments. It supports Wi-Fi standards, including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be, along with Bluetooth 5.2, offering a broad range of connectivity options. Capable of supporting a maximum of 24 SSIDs and over 380 connected devices, it is suitable for large-scale deployments.Security is a critical concern for any network, and the TP-Link Omada EAP772 V1 stands out in this aspect. It provides a variety of encryption algorithms, including WPA3-Personal and Enterprise, reinforced by RADIUS and SSID authentication methods. This ensures that your network is secure against external threats and data breaches. Additionally, features like Omada Mesh technology, seamless roaming, and cloud management capabilities make network setup and maintenance efficient and straightforward.The device's performance is noteworthy, with a maximum data rate of 11 Gbps across the 2.4 GHz, 5 GHz, and 6 GHz bands. It is engineered to accommodate the requirements of high-density environments, ensuring smooth and reliable connectivity for every user. With flexible deployment options, including PoE support and a wall/ceiling-mountable form factor, the TP-Link Omada EAP772 V1 is a versatile solution adaptable to various settings and applications.
hEX refresh The classic hEX refresh: same price, twice the performance! The staple of affordable routing for every home is back – stronger than ever due to the modern ARM CPU and extra RAM. The affordable, reliable router you know and trust is now stronger than ever. With the latest refresh, the hEX delivers twice the performance for the same great price. Whether you’re looking for a rock-solid solution for your home or small office, hEX ensures seamless and stable connectivity with a powerful upgrade: we’ve increased the RAM from 256 MB to 512 MB, and replaced the CPU with a modern ARM dual-core workhorse! Depending on your configuration, the performance increase can reach 100-134%! With 5x Gigabit Ethernet ports, hEX is the most cost-effective way to interconnect your main home or office devices. And you can use the full-sized USB port to add extra storage to stream high-quality media across devices!
The Ubiquiti UniFi Device Bridge Pro is designed to provide robust wireless connectivity in various environments. With an antenna gain level of 19 dBi and support for advanced wireless protocols like IEEE 802.11a/n/ac, this device ensures strong signal transmission over long distances. It has a range of up to 5 km in open space, suitable for applications where network extension is essential.This device is built to withstand extreme conditions, operating in temperatures from -40°C to 60°C and humidity levels between 5% to 95%. The weatherproof, UV-resistant casing protects the internal components, making it a reliable option for outdoor installations. Equipped with Power over Ethernet (PoE) capabilities and efficient performance reaching up to 867 Mbps on the 5 GHz band, the Ubiquiti UniFi Device Bridge Pro is an effective solution for establishing a resilient wireless bridge.
Kruger & Matz V-LED20 LED-projektor on mitmekülgne ja kompaktne projektsiooniseade, mis on mõeldud teie visuaalse kogemuse parandamiseks kodus, kontoris või teel olles. Elegantse ja moodsa disainiga projektoril on tipptasemel LED-tehnoloogia, mis pakub elavat ja eredat pilti täiustatud värvitruuduse ja heledusega. Kompaktne suurus muudab selle uskumatult mobiilseks, nii et saate seda hõlpsasti transportida ja üles seada, kus iganes te seda vajate. V-LED20-l on kasutajasõbralik kasutajaliides ja lai valik ühendusvõimalusi, sealhulgas HDMI-, USB- ja AV-sisend, mis muudab selle väga ühilduvaks paljude erinevate meediaallikatega, näiteks sülearvutite, nutitelefonide ja mängukonsoolidega. See projektor toetab mitmesuguseid eraldusvõimelisi formaate, andes teile paindlikkuse kristallselge pildi edastamiseks kuni Full HD-formaadis, tagades, et iga detail on täpselt jäädvustatud. Sellel on ka sisseehitatud kõlarid, mis pakuvad piisavat heliväljundit, et vaadata kõike ühest seadmest, kuid see pakub ka heliväljundi võimalusi neile, kes eelistavad rohkem kohandatud helikomplekti. Energiatõhus LED-valgusallikas ei taga mitte ainult pikemat kasutusiga võrreldes traditsiooniliste lampidega projektoritega, vaid on ka keskkonnasõbralik, vähendades teie süsinikujalajälge. Kruger & Matz V-LED20 LED-projektor sobib ideaalselt filmide, esitluste või mängude jaoks ja on ideaalne investeering, et muuta teie visuaalne sisu hämmastavalt eredaks ja värviküllaseks.
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
Security algorithms TKIP/WPA-EAP/WPA-PSK/WPA2-PSK/WPA2-Enterprise/OWE/AES-CCMP/EAP-TLS/WPA3-EAP/WPA3-SAE | 1xEthernet LAN (RJ-45) ports | Antenna type Internal | Weight 285 g | Operating temperature (T-T) 0 C to 50 C C
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
The TL-SF1024D Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 24 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
Original part number CS22U-A7 Product name ATEN CS22U 2-Port USB KVM Switch, Remote port selector, 0.9m cables Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case compact size Maximal resolution 2048 x 1536 pixels Active port selection pushbutton Possibility of joining into cascade No Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory KVM cable 1.8m for PC with USB, USB, D-Sub-15 conectors - 2pcs Width 82 mm Height 25 mm Depth 77 mm Net weight 310 g Additional information integrated cablesNo power supply neededsupport for multifunction keybords and mousessupport for Win, MAC, Linux and Sun Datasheet Datasheet More info More info
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
The CS22D 2-Port USB DVI KVM Switch is a control unit that allows access to two computers from a single USB and DVI console (keyboard, video and mouse). With the CS22D, you can access the computers conveniently via a Remote Port Selector.- One DVI-D video console controls two DVI-D USB interface computers.- Computer Selection via Remote Port Selector.- OS Support: Windows 2000, Windows XP, Windows Vista, 7, Mac, Sun and Linux.- Superior video quality- up to 1920 x 1200@60Hz.- Supports USB hot-plugging.- Non-powered.- Supports USB 2.0 device.DesignNumber of Hosts 2Supported Maximum Resolution 1920 x 1200 Resolution (pixels)Device Switchoveron the DeviceLEDPort 2Terminal-Device ConnectionsUSB 2DVI-I 1Connections per ComputerUSB 1DVI-D 1Product dimensions 100 x 30 x 94 mmWeight 330 grams
Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
