The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 9-48V PoE.
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product). - SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - SXTsq Lite5 (International) supports 5150MHz-5875MHz range.Included Parts Wireless specifications5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s25-9631654MBit/s20-80100MCS025-96316MCS719-7579
Gross depth (mm): 99 mm Gross height (mm): 104 mm Gross width (mm): 171 mm Packing quantity: 1.00 pc(s) Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: Yes Other features: with AC Passthrough Paper/Pasteboard: 110 g Plastic (No PET): 3 g Producer product name: RE365 Producer product family: Extender Ethernet LAN (RJ-45) ports: 1 POE: no PoE Wi-Fi band: 802.11ac Antenna type: 2xExternal Ethernet LAN data rates: 10/100/1000 Mbit/s Wi-Fi data rate (max): 300+867 Mbit/s Frequency band: 2.4GHz/5GHz MU-MiMO: No
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
R1200 AC1200 Dual Band Smart WiFi Router AC1200 Dual Band WiFi Router 5dBi high gain antennas for large house coverage Built-in Firewall will protect your home network The guest network will protect your privacy Support VPN Clients: PPTP/L2TP/OpenVPN/WireGuard IPv6 compatible Easily encrypt your wireless security with the push of a WPS button
10xSFP28 | 1xConsole | 1x10/100M | Included Accessories IEC cord, IEC cord, K-54 kit, Rack ears for CRS510 | Dimensions 320 x 185 x 44 mm | Unit Net Weight 2 kg
SG3452XMPP Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++ - 4× 10 Gbps SFP+ slots - 8× Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port) - 40× Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port) - 750 W total PoE budget - Centralized cloud management via the web or the Omada app† - Standalone management via web, CLI, SNMP, and RMON - Static Routing helps route internal traffic for higher efficiency - VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM - ERPS supports rapid protection and recovery in a ring topology - Durable metal casing and rack-mountable design
Mobiilne 4G-ruuter tööstuslikele IoT-rakendustele, mis toetab jadaliideseid RS232 ja RS485, MQTT, BACnet, I/O-d, Ethernet ja muud. See mobiiliruuter on varustatud GNSSi ja tõrkekindlate funktsioonidega, nagu Dual SIM, automaatne katkestus ja WAN-i varukoopia. ÜHENDUS4G LTE (Cat 4), 3G, 2GDUAL SIMAuto-failover, varu WAN ja rohkem lülitusstsenaariumeLIIDESED JA PROTOKOLLIDSeeriaviisilised liidesed (RS232 ja RS485), MQTT, BACnet, OPC UA, I/O, Ethernet ja palju muud.GNSSNTRIP, asukohateenused ja ajasünkroniseerimine
Välitingimustes kasutataval OTD140 ruuteril on spetsiaalne ja vastupidav IP55 plastmassist korpus ning integreeritud paigaldusklamber, mis muudab selle 4G välijuhtimismooduli kergesti kasutatavaks ja vastupidavaks välitingimustes. Lisaks sellele on see välitingimustes kasutatav ruuter varustatud LTE Cat 4 ühenduvuse, ühilduvuse RMSiga kaugjuhtimise võimaluste jaoks ja kahe PoE-in/out Ethernet-portiga.IP55 PIONEERIP55 vastupidavus välitingimustes kasutamiseksÜHENDUS4G LTE (Cat 4), 3G, 2GAUTO FAILOVERKaks SIM-kaarti automaatse ümberlülitusega ja muud ümberlülitamisstsenaariumidPOE-IN/OUT1 x PoE-in ja 1 x PoE-out portStandard toode sisaldab:OTD140 ruuterKinnitusQSG (Kiirjuhend)Pakendikarp
The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks is the latest generation of D-Link Gigabit Smart+ Switches with Fiber Uplinks featuring D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv6 Ready Logo Program Approved, support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the Gigabit Smart+ Switches with Fiber Uplinks allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras.
AX1800 Indoor/Outdoor WiFi 6 Access Point - Superior WiFi 6 Speeds: Delivers dual-band speeds of up to 1.8 Gbps powered by the latest WiFi 6 technology† - Higher Network Efficiency: Enjoy faster speeds on more devices with less lag via OFDMA and MU-MIMO - Long-Range Coverage: Dedicated high-power amplifier and professional antennas with IP67 weatherproof enclosure - Omada Mesh Technology: Enables wireless connectivity between access points for extended range and flexible deployment** - Stay Smooth with Fast Roaming: Users can enjoy seamless streaming across the property with their devices switching effortlessly between access points** - Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management
