The TL-SF1016DS Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016DS can save up to 25%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 16 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
Xtreme Wireless AC1200 Dual Band USB Adapter Draft 802.11ac support, up to 867 Mbps data rate Backward Compatible with 802.11a/b/g/n, 2.4/5Ghz High speed USB 2.0 interface WEP, WPA, WAP2 encryption support. Support WPS (PIN or PBC methods), external WPS button to connect Access Point easily Flash like formfactor Without USB cradle
5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
Tested according to Link Performance Class E, for up to 250 MHz UL certified Housing of steel sheet Shielded RJ45 female sockets, 8P8C 1U Cable installation via LSA strips, colour-coded as per EIA/TIA 568B Fixing option for cable ties, central ground connection.Portide hulk24Pistmik(ud)RJ45Toetatud kaablitüübidCat6Toote värvHallPüstikmontaažJahPüstiku mahutavus1UKaabliühendusLSA
With the ever-growing demand for higher video quality and the evolution of DisplayPort technology, 4K-enabled computers and displays are now widely adopted in visually-intensive and commercial applications. Offering up to 4K UHD resolution, the ATEN CS782DP is at home amongst these demanding scenarios and technological advancements.The ATEN CS782DP 2-Port USB DisplayPort KVM Switch features 4K UHD video resolution and allows users to access two 4K-enabled computers from a single USB keyboard, USB mouse, and DisplayPort video console.Doing so with ease, the CS782DP provides three convenient switching methods – using a remote port selector, mouse, or hotkeys for flexible access to any computer connected to the installation. The product even provides premium audio support for a complete multimedia solution. To round off the entire experience, the streamlined, space-saving design of CS782DP also makes it ideal for any working environment.With its rich feature set, the CS782DP is designed to surpass all requirements in graphic design, animation, and video-editing applications.Kontrollitavate arvutite arv2Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpDisplayPortAudioühendusedJahKaabli pikkus1,8 mUSB 2.0 portide arv4Kõrvaklapiväljundite arv3Konsooliosad3.5 mm kõrvaklapid, DisplayPort, USB AKonsooli USB-pesade arv2USB-pistmiku tüüpUSB Type-A,USB Type-BMaksimaalne resolutsioon3840 x 2160 pikslitToote värvMustMaterjalPlastEraldi paikneva lüliti juhtme pikkus1,8 mSisseehitatud ekraanEiHDCPJahKaabli maksimaalne pikkus1,8 mVäljundpinge5 VVõimsustarve (tüüpiline)4 WUSB versioon2.0Kasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiSuhteline õhuniiskus (H-H) hoiustamisel0 - 80 protsentiLaius93 mmSügavus93,7 mmKõrgus26,8 mmKaal120 gKaablid kaasa arvatudAudio (3.5mm), DisplayPort, USBJuhendJah
CRS317-1G-16S+RM The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features,it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance forall sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning TreeProtocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for yourdemanding network. The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hotenvironments two redundant fans will automatically keep the system cool if needed. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding,apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IPheader fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features Boot option for SwOS or RouterOS • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Web-based GUI• 800 Mhz CPU• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Link Aggregation (LACP)• Access Control List• MikroTik neighbour discovery• SNMP v2/v3• rackmount and tabletop Switching resultsCRS317-1G-16S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput239,583.3122,666.737,828.9154,947.413,085.2158,906.4SwitchingNon blocking Layer 2 capacity239,583.3245,333.337,828.9309,894.713,085.2317,812.7SwitchingNon blocking Layer 1 throughput239,583.3161,000.037,828.9161,000.013,085.2161,000.0SwitchingNon blocking Layer 1 capacity239,583.3322,000.037,828.9322,000.013,085.2322,000.0
Original part number CS1308-AT-G Product name ATEN KVM 8/1 USB PS/2 OSD 19" Producer Aten Class of product KVM switches Number of PC ports 8 Supported keyboard/mouse/display ports PS/2, PS/2, D-Sub-15USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case Rack 19" Maximal resolution 2048 x 1536 pixels Active port selection keyboard hotkeyspushbuttonthrough OSD Menu Possibility of joining into cascade Yes Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computerseasy firmware upgrade Standard accessory clip handleAC adaptercommunication cable Width 440 mm Height 44 mm Depth 160 mm Net weight 1.89 kg Additional information 2k/XP/Vista Win, Linux, Mac, Sun compatibleCascade connection o 8 switches allows on control over 64 computersTwo logging levels. Separate profiles of users and administratorHot plugable - pluging in and out devices without switching off
airCUBE - airMAX Home Wi-Fi Access PointWith a compact design and integrated 24V PoE passthrough, the airCube™ is a home Wi-Fi access point designed to interoperate with airMAX® CPEs and is available in two models. UNMS SupportUbiquiti Network Management Software simplifies remote network management. Super Antenna Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points. 24V PoE Passthrough The airCube can be powered by and provide power to an airMAX CPE using 24V PoE. Sleek Design The airCube's attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
Gross depth (mm): 99 mm Gross height (mm): 104 mm Gross width (mm): 171 mm Packing quantity: 1.00 pc(s) Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: Yes Other features: with AC Passthrough Paper/Pasteboard: 110 g Plastic (No PET): 3 g Producer product name: RE365 Producer product family: Extender Ethernet LAN (RJ-45) ports: 1 POE: no PoE Wi-Fi band: 802.11ac Antenna type: 2xExternal Ethernet LAN data rates: 10/100/1000 Mbit/s Wi-Fi data rate (max): 300+867 Mbit/s Frequency band: 2.4GHz/5GHz MU-MiMO: No
5-Port 10/100/1,000 Mbps Desktop Switch Five 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
USW-Flex-MiniUniFi Compact 5Port Gigabit Desktop SwitchBuild and expand your network with the UniFi Switch part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch model USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the USB Type-C power adapter (NOT included) or with 802.3af PoE Ethernet in port 1.5V 1A USB-C power adapter included only with the single-pack of the USW-Flex-Mini.
24-Port PoE Gigabit Smart Switch, 24x 10/100/1000Mbit/s TP (RJ-45) Port davon 12 x PoE 802.3af/802.3at, 802.3x Flow Control, statisches Trunking, bis zu 4 Ports in bis zu 8 Gruppen, Loopback Detection, 802.1Q VLAN
G4 PTZ is a superior surveillance camera for shopping centers parking lots airports train stations and other transportation hubs. Pairing G4 PTZ’s advanced optical and video technologies with UniFi Protect’s ease of use creates a unique solution for the most demanding environments. G4 PTZ comes with IP66 weatherproof casing and flexible powering options.Note: UniFi Protect is required to run this product with full functionality its recommended to use it with UniFi Dream Machine PRO or UniFi Protect Network Video Recorder.
Schneller WLAN-Repeater, bis zu 2x 2.400 MBit/s (5 GHz) und 1x 1.200 Mbit/s (2,4 GHz), Mesh-fähig, 802.11a/g/n/ac/ax, 1x 2,5-GBit-LAN und 1x Gbit-LAN, WPA2 und WPS
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
