6-Port Cloud Managed Desktop Gigabit Switch with 4-Port PoE > 4 × RJ45 Gigabit PoE ports, 2 × RJ45 Gigabit ports. > 60 W total PoE budget, 802.3af/at on all PoE ports, additional Hi-PoE on orange port. > Wide operating temperature ranging from –10 °C to 55 °C. > Supports VLAN, STP, RSTP and link aggregation. > WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network. > Easy config to auto detect and set up network.
Stable mobile Internet in all conditionsThe 5G directional antenna with 16dBi gain has been designed to improve the quality and stability of the mobile network signal. Thanks to its directional radiation pattern, the antenna concentrates energy in a selected direction, allowing you to precisely "aim" at the base station and achieve significantly better connection parameters than with omnidirectional antennas. The SMA connector used ensures compatibility with a wide range of 5G modems and routers.Wide frequency range of 3300-3800 MHzThe antenna operates in the 33003800 MHz band, which is used for modern 5G NR (n78) networks in Poland and Europe. This band provides: high data transmission bandwidth, low latency, a more stable connection compared to older technologies. Excellent performance and weather resistanceThe 5G antenna was designed to improve the quality of your internet connection at home, in the office, and in any other room with internet access. It increases transmission stability, improves data download and upload speeds, and has a positive effect on overall Internet performance. IP67 rating, combined with resistance to various weather conditions, can ensure connection stability even in harsh weather conditions.Our solution offers: 5G support, a wide frequency range of 33003800 MHz, professional SMA connector ensuring low signal loss and a reliable, weather-resistant connection to the antenna cable, modern design thanks to the use of high-quality materials and attention to detail, 3-metre cable, allowing for convenient antenna installation, Directional 5G antenna for outdoor applicationsThe antenna has been adapted for mounting on a dedicated external bracket, which allows it to be installed on building facades, roofs and support structures. This method of installation allows the antenna to be placed at the appropriate height, ensuring better visibility of the transmitter and more stable signal parameters. This is not an omnidirectional antenna its effectiveness depends on correct directional alignment. This means that it should be pointed towards the nearest mobile operator transmitter (BTS).
8 × RJ-45 10/100 Mbps PoE ports, 1 × RJ-45 Gigabit port 60 W total PoE budget, 802.3af/at on all PoE port, additional Hi-PoE on orange port DIP switch to fast turn on/off working mode of Cloud-Managed, PoE Watchdog, Long Distance PoE Wide operating temperature ranging from –10 °C to 55 °C Supports VLAN and loop protection WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network Easy config to auto detect and set up network and security systems
Hikvision DS-3E0310HP-E on Hikvisioni Pro-seeria võrguseadmete hulka kuuluv 8-portiline Power over Ethernet (PoE) kommutaator. See on mõeldud nii toite- kui ka võrguühenduse pakkumiseks ühe kaabli kaudu PoE-toega seadmetele nagu IP-kaamerad VoIP-telefonid ja traadita pääsupunktid. See lüliti sobib eriti hästi kasutamiseks IP-valvesüsteemides kus on vaja pikamaa-kaabliühendusi. Peamised omadused: [ul] [li]Intelligentne PoE-haldus[/li] [li]Kuni 300 m pikkune PoE-ülekanne[/li] [li]IEEE 802.3bt standard Hi-PoE Max. 90 W ühe pordi jaoks[/li] [li]4/8-tuumaline adaptiivne toiteallikas väiksema energiakaduga[/li] [li]6KV ülepingekaitse et parandada töökindlust karmides tingimustes[/li] [/ul] Sellel kommutaatoril on kaheksa Fast Ethernet PoE porti ja kaks täiendavat Gigabit RJ45 porti. Lüliti esimene port toetab IEEE 802.3bt standardi kohast High-Power over Ethernet (Hi-PoE) mis suudab anda kuni 90 vatti mistõttu sobib see suurema võimsust nõudvate seadmete näiteks PTZ-kaamerate toiteks. Teised pordid pakuvad standardset PoE-toite kuni 30 vatti ühe pordi kohta nii et kogu PoE-toite eelarve on 110 vatti. DS-3E0310HP-E üks märkimisväärseid omadusi on selle PoE-ülekande kaugkasutamise võime mis võimaldab kuni 300 meetri ulatuses andmete ja toite ülekannet mis on oluliselt suurem kui standardse Ethernet-kaabli puhul. See omadus on eriti kasulik suuremahulistes paigaldustes kus seadmed on laiali suurtel vahemaadel. Lüliti on ehitatud vastupidava metallkorpusega ja mõeldud ventilaatorivabaks mis tagab vaikse töö ja vähendab hooldusvajadust. See kaalub 0 55 kg ja selle mõõtmed on 217 6 mm × 27 8 mm × 103 55 mm mistõttu on see kompaktne ja seda on lihtne paigaldada erinevatesse keskkondadesse. Lülitit saab paigaldada lauale seinale riiulile koos paigalduskõrvadega ning see sobib ka posti- või rööppaigalduseks. Tehniliste näitajate poolest on lülitil 8K MAC-aadresside tabel 5 60 Gbps kommutatsioonivõimsus ja 4 17 Mpps pakettide edastamise kiirus. Sisemine vahemälu on 4 Mbit. Need spetsifikatsioonid tagavad võrguliikluse tõhusa käsitlemise ja ühenduvuse kõigis portides. DS-3E0310HP-E on varustatud ka 6 KV ülepingekaitsefunktsiooniga mis suurendab selle töökindlust karmides keskkonnatingimustes. Lüliti vastab mitmetele EMC- ja ohutusstandarditele sealhulgas FCC CE-EMC IC RCM UL CB ja CE-LVD. See vastavus tagab et lüliti vastab kõrgetele tööohutuse ja elektromagnetilise ühilduvuse standarditele. Kokkuvõttes on Hikvision DS-3E0310HP-E mitmekülgne ja töökindel PoE-lüliti mis sobib ideaalselt kasutamiseks erinevates võrgukonfiguratsioonides eriti nendes mis nõuavad laiendatud PoE-ülekannet ja suure võimsusega väljundit ühendatud seadmetele. Tänu oma konstruktsioonile ja omadustele on see sobiv valik nii väikeste kui ka suuremahuliste võrgurakenduste jaoks.
• 8 x 100/1000/2500 Base-T RJ-45 PoE copper ports and 1 x 10G/SFP+ port. • Supports 8K MAC address auto-learning and auto-aging • Support IEEE 802.3bt at Port 1 • 15K jumbo frames to increase data transfer rates • IEEE 802.3x Flow Control protects against lost packets for reliable data transmission • Desktop and Wall mount design • Quick and easy installation
• Offers comprehensive connectivity with 8 10/100/1000Base-T RJ45, 8 100/1000Base-X SFP ports and 4 1G/2.5GBase-X SFP ports. • Ensures reliable operation with redundant 12-75V DC power supply, advanced surge protection (6KV), and ESD protection (Air-15kV, Contact-8kV). • Designed for harsh environments with fanless IP40 Din-rail enclosure and wide operating temperature range (-40°C to +80°C). • Delivers uninterrupted operation through G.8032 ERPS protocol with
• Offers comprehensive connectivity with 8 10/100/1000Base-T RJ45, 8 100/1000Base-X SFP ports and 4 1G/2.5G/10GBase-X SFP+ ports. • Ensures reliable operation with redundant 12-75V DC power supply, advanced surge protection (6KV), and ESD protection (Air-15kV, Contact-8kV). • Designed for harsh environments with fanless IP40 Din-rail enclosure and wide operating temperature range (-40°C to +80°C). • Delivers uninterrupted operation through G.8032 ERPS protocol with
• Managed L3 Web-based management • Quality of Service (QoS) support • Console port: RJ-45 • MAC address table: 128000 entries Switching capacity: 880 Gbit/s Multicast traffic suppression • Access Control List (ACL) • Rack mounting • AC Power supply included
Tootekood: Festa FS328G(UN)GTIN: 8885020624014Võrguseadmed
The TP-Link Festa FS328G V1 is designed to enhance networking capabilities with its efficient architecture and robust features. With 24 10/100/1000Base-T ports and 4 Gigabit SFP ports, this switch supports an extensive range of devices, facilitating smooth and rapid data transmission. Its support for VLAN and IGMP snooping enriches network segmentation and traffic management, making it suitable for various environments, from small offices to larger organizations. Equipped with 32 MB of flash memory and 256 MB of RAM, the device ensures reliable performance even under heavy usage scenarios. The management protocols, including SNMP and DHCP, allow for easy monitoring and control of network resources. Operating efficiently within a temperature range of 0°C to 40°C and featuring a fanless design, the TP-Link FS328G V1 promotes quieter operation while maintaining optimal performance, even in demanding environments.
• 8× Gigabit 802.3af/at/bt PoE++ ports (Max 90W per port) • 40× Gigabit 802.3af/at PoE+ ports (Max 30W per port) • 4× 10 Gbps SFP+ slots • Up to 770W total PoE budget* • Fast PoE and Perpetual PoE • Physical stacking up to 4 units for built-in redundancy and performance • L3 features: RIP, OSPF, Static Routing, and DHCP Server/Relay • Security strategies: ACL, Port Security, DoS Defend, 802.1X • ERPS supports rapid protection and recovery in a ring topology • Centralized cloud management via the Omada SDN controller • Standalone management via web, CLI, SNMP, and RMON
XS1935 Series As businesses adopt cloud applications, AI-driven workloads, and high-definition collaboration tools, network performance is critical. With WiFi 7 delivering speeds beyond 10 Gbps, the demand for faster, more efficient wired infrastructure is growing. Zyxel's XS1935 Series Switch is built for modern networks with future-ready technology. Smart fan design delivers near silent and stable Multi-Gig 10G operation.Unlock the Future of Networking with 10G Multi-Gig SwitchesA 10G Multi-Gig switch provides the flexibility to support 100M, 1G, 2.5G, 5G, and 10G connections, allowing businesses to upgrade their network gradually without overhauling their entire infrastructure. This ensures that high-performance devices such as servers, NAS, workstations, and next-gen WiFi 7 access points can operate at their full potential without bottlenecks.
• 2.03 Gbps wireless throughput and 4 Gigabit wireline ports 5GHz 4×4:4 MU-MIMO • Supports up to 200 concurrent Wi-Fi client devices • Advanced QoS to ensure real-time performance of low-latency applications • Anti-hacking secure boot and critical data/control lockdown via digital signatures, unique security certificate/random default password per device • Self-power adaptation upon auto detection of PoE or PoE+ • Embedded controller can manage up to 30 local GWN series APs • GWN.Cloud offers unlimited AP management; GWN Manager offers premise-based software controller
• Provides wireless speeds of up to 1800Mbps(574Mbps in 2.4GHz/1201Mbps in 5GHz) • OFDMA and MU-MIMO support • Compatible with IEEE 802.11a/b/g/n/ac/ax Wave 2 wireless standards • Built-in 2 x 2 MIMO antenna • Multi-operation modes to suit different wireless applications • Dual power support: 12V DC/PoE (IEEE 802.3at) • Provides up to 8 SSIDs to separate network traffic • High power and receiver sensitivity designed to boost your signal coverage and link speed • Supports WPA3 encryption, compatible with WPA2/WPA
• The use of high quality photoelectric integration module to provide good optical and electrical characteristics • Ensure reliable data transmission and long working life • Support full duplex or half duplex mode, with automatic negotiation capability • Network port support automatic cross identification • Internal storage and forwarding mechanism, support a variety of protocols • In line with industrial operating standards, the average trouble-free work in more than 300,000 hours • Working power supply: DC 48-57V to provide reverse protection • Interface: 1-port 10/100/1000 Base-Tx RJ-45 with auto negotiation and auto-MDI/ MDI-X function, supplying 30W PoE, compatible with 802.3at/at • 10/100/1000 Base-TX Port: 1 port RJ-45 auto-MDI / MDI-X • PoE Standard: IEEE802.3af/ IEEE802.3at • PoE ports: +1 Port PoE • Power Output: Max. 15.4 watts (IEEE 802.3af), Max. 30 watts (IEEE 802.3at) • PoE port Auto detect af/at devices • Output Voltage: DC48V • Power Pin Assignment: 1/2+;3/6- • Power Type: End-span(Mid-span optional) • 1000 Base-FX Port: SFP Slot • Optical Frequency: Vary on module • Performance Specification: Bandwidth: 14 Gbps, Packet Buffer Memory:1.2 Mbit, Packet Forwarding Rate:10.5 Mpps, MAC Address Table: 2K • Installation: DIN rail • Maximum Frame Size: 9000 bytes packet size • Flow Control: Back pressure for half duplex, IEEE 802.3x pause frame for full duplex • Enclosure: IP40 aluminum housing • LED Indicator: Power: Red, Fiber: Link 2(Green), Ethernet: Yellow • Power Input: 48 to 57V DC redundant power • Power Consumption: 300,000hours • Dimensions (W x D x H): 118x 92.4 x 40 mm • Weight: Product Weight: 0.4KG, Packing Weight: 0.53KG • Working Environment: Working temperature: -40～80℃, Storage temperature: -40～80℃, Relative Humidity: 5%~95 %(no condensation)
Tööstuslik LTE-ruuter Teltonika RUT986 on tööstusliku tasemega LTE-ruuter, mis on loodud usaldusväärseks pikaajaliseks tööks nõudlikes keskkondades. See ühendab endas usaldusväärse Telit LTE Cat 4 modemi ja töökindla riistvaraplatvormi, pakkudes mobiilside andmeedastuskiirust kuni 150 Mbps allalaadimisel ja 50 Mbps üleslaadimisel, koos automaatse üleminekuga 3G- (kuni 42 Mbps) ja 2G-võrkudele, et tagada pidev ühendus. Seade on mõeldud sujuvaks integreerimiseks tööstussüsteemidesse, pakkudes laia valikut füüsilisi liideseid. See sisaldab 4 × RJ45 Etherneti porti (10/100 Mbps), mis võimaldavad mitmeid traadiga ühendusi, samuti jadaliidest RS232 (DB9-pistik RTS/CTS voolu juhtimisega) ja RS485 kaudu, mis toetavad nii täisdupleks- (4-juhtmeline) kui ka pooldupleks- (2-juhtmeline) režiime baudikiirusega 300 kuni 115200. Need võimalused võimaldavad otsest suhtlust PLC-de, SCADA-süsteemide ja vanemate tööstusseadmetega. Lisaks on ruuteril mitu digitaalset sisendit ja väljundit tööstuslike pistikute kaudu, mis võimaldab tal suhelda andurite, häiresüsteemide ja juhtimissüsteemidega. Sarjaliidese funktsionaalsus hõlmab konsooli juurdepääsu, Serial over IP-d, Modbus-väravat ja NTRIP-kliendi tuge, mis laiendab integratsioonivõimalusi veelgi. Riistvara disain hõlmab spetsiaalseid antennipistikupesad (2 × SMA LTE-le, 2 × RP-SMA Wi-Fi-le ja 1 × SMA GNSS-ile), USB-porti väliste seadmete jaoks ning selgelt nähtavaid oleku-LED-e ühenduse jälgimiseks. Alumiiniumkorpus koos plastpaneelidega tagab vastupidavuse, samas kui IP30-kaitseklass tagab ohutu töö tööstuslikes tingimustes. Laia töötemperatuuri vahemikuga -40 °C kuni +65 °C ja paindlike paigaldusvõimalustega on RUT986 usaldusväärne tööstuslik gateway keeruliste rakenduste jaoks. Täiustatud võrgustikufunktsioonid RUT986 pakub tööstus- ja ettevõtete rakenduste jaoks vajalikke täiustatud võrgustikufunktsioone. Seade toetab nii staatilisi kui ka dünaamilisi marsruutimisprotokolle, sealhulgas BGP, OSPF v2, RIP v1/v2, EIGRP ja NHRP, võimaldades integreerimist keerukatesse võrgustikuinfrastruktuuridesse. Poliitikapõhine marsruutimine võimaldab täpset liikluse juhtimist, tagades optimaalse andmevoo mitme ühenduse vahel. Ruuter toetab laia valikut võrguprotokolle, nagu TCP, UDP, IPv4, IPv6, ICMP, DNS, HTTP(S), MQTT, SNMP, SSH ja VXLAN, mistõttu sobib see IoT-le, telemeetriale ja pilvepõhistele lahendustele. DHCP-funktsioonid hõlmavad staatilist ja dünaamilist IP-aadresside jaotamist, DHCP-edastust ja täiustatud rendiperioodi haldamist. Traadita ühendus tagatakse Wi-Fi 4 (802.11b/g/n) kaudu, mis toetab juurdepääsupunkti ja jaama režiime kuni 100 samaaegse kliendiga. Täiustatud traadita tehnoloogiad, nagu võrgustikuvõrgustik (802.11s), kiire rändlus (802.11r), BSS-i üleminekuhaldus (802.11v) ja raadioressursside mõõtmine (802.11k), tagavad stabiilse ühenduse dünaamilistes keskkondades. Võrgu segmentatsioon on võimaldatud VLAN-i toetuse kaudu (porti- ja sildipõhine), samas kui QoS ja Smart Queue Management (SQM) võimaldavad liikluse prioriseerimist protokolli, porti või teenuse alusel. WMM ja 802.11e parandavad veelgi traadita liikluse haldamist. Turvafunktsioonid hõlmavad konfigureeritavat tulemüüri koos portide edastamise ja kohandatud reeglitega, DDoS-kaitset, SYN-üleujutuse leevendamist ja portide skannimise ennetamist. Autentimismeetodite hulka kuuluvad eelnevalt jagatud võtmed, X.509 sertifikaadid, TACACS+ ja RADIUS. VPN-tugi hõlmab OpenVPN-i (mitmed krüpteerimisvõimalused), L2TP-d, PPTP-d ja IPsec-i, tagades turvalise kaugjuurdepääsu ja krüpteeritud side. Kaugjuhtimine RUT986 töötab RutOS-i operatsioonisüsteemi alusel, mis on tööstuslikuks võrgustikuks loodud OpenWrt-põhine Linuxi operatsioonisüsteem. Seade toetab selliseid arenduskeskkondi nagu BusyBox-kest, Lua ja C/C++, võimaldades seadme põhjalikku kohandamist ja integreerimist spetsiaalsetesse lahendustesse. Süsteemi jõuallikaks on Mediatek MIPS 24KEc CPU (580 MHz), millel on 128 MB DDR2 RAM-i ja 32 MB NOR-välkmälu, mis tagab stabiilse ja tõhusa jõudluse. Seade toetab nullpuutega kasutuselevõttu, võimaldades automaatset konfigureerimist ilma käsitsi seadistamiseta. Tsentraliseeritud haldus on saadaval Teltonika kaugjuhtimissüsteemi (RMS) kaudu, mis pakub kaugjuurdepääsu, seiret, püsivara uuendusi (FOTA) ja diagnostikat. WebUI-liides (HTTP/HTTPS) hõlmab süsteemilogisid, tuumalogisid, sündmuslogisid ja reaalajas seisundi jälgimist. GNSS-funktsionaalsus toetab GPS-, GLONASS-, BeiDou-, Galileo- ja QZSS-süsteeme, pakkudes täpseid asukohaandmeid, millele on juurdepääs veebiliidese, SMSi või RMSi kaudu. Seetõttu sobib ruuter hästi sõidukipargi haldamiseks, varade jälgimiseks ja mobiilseteks rakendusteks. Toide antakse 4-kontaktilise tööstusliku alalisvoolu pistikupesa kaudu (9–30 VDC), mis on varustatud vastupooluse ja ülepingekaitsega. Passiivset PoE-d (režiim B) toetatakse LAN1 kaudu. Energiatarbimine on tõhus, ooterežiimis alla 2 W ja tippkoormusel alla 7 W. Lisafunktsioonid hõlmavad SMS-haldust, SSH-juurdepääsu (v1/v2), püsivara uuenduste teateid ja kaugdiagnoosivahendeid. Koos ulatuslike seire- ja juhtimisvõimalustega on RUT986 terviklik lahendus tööstuslikuks ühenduvuseks ja võrguhalduseks.
• 8 x 2.5G PoE ports and 2 x 1G/10G SFP+ uplink ports for high-speed industrial networking • High-power PoE++ (IEEE 802.3af/at/bt) with up to 90W per port and a total power budget of 480W • PoE Watchdog automatically detects and restarts unresponsive powered devices • Advanced L3 management with support for RIP, OSPF, and VRRP • 6kV surge protection for reliable operation in harsh environments • Industrial-grade design with a wide operating temperature range of -40°C to 75°C • Flexible installation options, including DIN-rail, wall-mount, and desktop deployment
• Multi-Gig 10G Connectivity: 8 x 100M/1G/2.5G/5G/10G RJ45 ports and 4 x 1G/2.5G/10G SFP+ uplinks for flexible copper and fiber designs • High-Performance Fabric: 240Gbps non-blocking switching capacity and 178.56Mpps forwarding for wire-speed throughput on every port • Advanced L3 Routing: Static IPv4/IPv6 routes, RIP v1/v2, OSPF v2 and BGP-4 for scalable inter-VLAN and WAN routing • Rich VLAN Segmentation: Supports up to 4K 802.1Q VLANs with QinQ, private, voice, guest and subnet-based VLAN options • Strong Security: 802.1X authentication, ACLs, MAC/port limiting and DoS protection to block unauthorized access and attacks • Service-Aware QoS: Eight hardware queues per port with SP, WRR and WDRR scheduling to prioritize voice, video and critical services • Resilient Architecture: LACP/static trunks, MSTP (64 instances) and ERPS rings for load sharing and sub-second failover • Comprehensive Management: Web GUI, console/Telnet/SSH, HTTPS/SSL, SNMP v1/v2c/v3, Syslog and FTP/TFTP for easy deployment and monitoring • Rack-Ready Design: 19-inch rack-mount L3 10G switch ideal for SMB cores, campus edge and high-performance workgroups
TP-LINK 500Mbps Mini Powerline Adapter TL-PA411 turns your existing powerline into a high speed network with no need for new wires or drilling. No configuration is required, simply plug your adapters into your power sockets and you can establish networking infrastructure in a flash. With a speed of up to 500Mbps, TL-PA411 transmits multiple HD streams and even 3D movies to every room, making it a great choice for an easy to build multimedia entertainment network. HomePlug AV standard compliant, high-speed data transfer rates of up to 500Mbps No new wires, Easy Plug and Play operation, No configuration required Super small design with a new exterior, blends indiscreetly in front of any power outlet Patented Power-Saving Mode automatically reduces power consumption by up to 85%*
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Full Duplex Gigabit speedsConverts a non-PoE Gigabit port to a PoE+ or PoE Gigabit portIntegrated power supplyNetwork distances of up to 100 meters (328 feet)Save on installation and equipment costs
The RB912 is also available in an outdoor enclosure, fit with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
