Extender switch PoE DIN-FE4-AT-30W LanbergPoE extender (often referred to as a PoE repeater or "amplifier") is a practical component in installations where we need to run devices far from the telecommunications cabinet, and the classic 100 m limitation on Ethernet and PoE power becomes a barrier. Such a PoE switch acts as an active splitter: it regenerates the signal and transmits PoE power further, allowing you to safely "extend" power and transmission to subsequent points in the LAN without an additional power supply in the field and without having to deal with intermediate power sockets.Key features of DIN-FE4-AT-30W that really help installers and LAN administrators 4-port RJ45 layout: 1x input port + 3 PoE output ports (ideal when you need to add a "branch" to the installation). PWR and Link/Act LED indicators on ports quick diagnostics and field service. Extension of LAN and PoE power by another 100 m on a single UTP twisted pair (i.e., still "one cable"). DIN mounting on a TS-35 rail with a metal clip convenient, secure, and "rack-mounted." Extend the range of PoE power and network signal in your LAN by 100 mThis is the most common scenario: surveillance cameras, access controllers, alarm components, Wi-Fi/access points, and other PoE-powered network devices are "too far" from the main network switch in the rack. Instead of installing a 230 V power supply along the way, you insert a PoE extender into the path.The DIN-FE4-AT-30W works in a simple, practical way: it receives data and PoE power at the PoE input, and then provides a fresh Ethernet signal and PoE at the outputs - meaning you can effectively extend the range of your installation by another 100 m. This is a great solution when you need to run several PoE receivers, e.g., several cameras in a hall, parking lot, or long corridor, and the power supply and transmission are to go through a single UTP cable.4-port PoE extender switch with cascading capabilityIn practice, you gain the most when the extender works not only as a single module, but also in a serial arrangement. Both models can operate as an extender in a single configuration and in a cascaded connection.How does this work in the field? You connect the first extender (PoE IN) to the PoE switch, and then you can add another and another - up to 3 devices in series (i.e., a 3-level/three-level cascade). Each extender "adds" another 100 m, so you gain a maximum of +300 m in relation to the nominal range. At each stage, apart from the next extender, there is room for an additional network branch: you can connect 2 cameras or other peripherals (e.g., an IP sensor, a small AP) - that is, exactly when you have points "along the way" that you want to power with PoE. This is convenient when you are expanding your LAN in stages and want your infrastructure to be flexible and easy to maintain.Advanced PoE extender ready for any taskThe DIN-FE4-AT-30W is a compact Layer 2 switch that makes life easier in PoE installations thanks to proven transmission mechanisms: Automatic MDI/MDI-X - the ports select the pairing method themselves, so you don't have to worry about the type of cable (patch cord/crossover). Flow control (IEEE 802.3x) - flow control reduces losses and overloads during peak traffic. MAC auto-learning + 2K MAC table - automatic address learning speeds up operation and stabilizes switching in small LAN segments. The DIN-FE4-AT-30W version supports IEEE 802.3i (10Base-T) and IEEE 802.3u (100Base-TX) wired standards and PoE+ compliant with 802.3af and 802.3at. This is an important distinction, because in installations you will also encounter passive PoE solutions here we are talking about standard, negotiated PoE. At the same time, the device has passive cooling (no fan) and very low power consumption approx. 1.6 W, so it is suitable for continuous operation.Robust, durable housing and convenient mounting on a TS-35 DIN rail with a metal clipIn industrial and technical installations, it is not only the PoE function that counts, but also the installation. That is why the housing and metal clip for the TS-35 DIN rail are more than just a detail: they save time and keep the switchboard tidy.Advantages of DIN rail mounting for the installer/administrator: Quick and easy installation (snap-on) Space saving Easy modification and maintenance Versatility and standardization Neat cabling Durability and safety Cost reduction If your LAN infrastructure has areas where the network needs to be extended beyond the standard 100 m, and you also have PoE-powered devices (e.g., IP cameras and other devices, access points, etc.), the DIN-FE4-AT-30W is designed as an extender for such tasks. Choose the model according to your power requirements: PoE+ for typical peripherals or PoE++ where you need a larger PoE budget and gigabit transmission.
D-Link EAGLE PRO AI R03: a compact N300 wireless router designed for a basic home network, apartment or small office. The device operates in the 2.4 GHz band and offers Wi-Fi speeds of up to 300 Mb/s, enabling convenient Internet browsing, e-mail, VoIP calls, remote learning and video playback. The AI ??Wi-Fi Optimizer function constantly analyzes the network environment and helps select the least loaded wireless channel. This allows you to limit interference from neighboring networks and maintain the most stable connection possible. Two external antennas with a gain of 5 dBi improve the range and quality of transmission. QoS technology allows you to prioritize selected devices and types of network traffic. Thanks to this, a computer used for work, a TV or a console can be given higher priority than less important devices. AI Parental Control allows you to create Internet access schedules and block selected websites. Health Mode allows you to automatically turn off the Wi-Fi network at set times, for example at night, and limit the time children have access to the Internet. The router supports modern WPA3 encryption, and the built-in firewall offers protection against DoS attacks, SPI control, anti-spoofing protection, and IP and MAC address filtering. The device can be managed via the EAGLE PRO AI application for Android and iOS or using the panel available in the browser. Four LAN ports and one WAN Fast Ethernet port allow you to connect computers, TVs, consoles and other wired devices. The router supports popular Internet connection methods, including dynamic and static IP, PPPoE, PPTP, L2TP and DS-Lite. Device type Wireless router EAN 0790069472763 Manufacturer number R03/E Model D-Link EAGLE PRO AI R03 Wi-Fi class N300 Wi-Fi Standard Wi-Fi 4, IEEE 802.11n Supported Wireless Standards IEEE 802.11b, IEEE 802.11g and IEEE 802.11n 2.4 GHz Frequency Band Maximum Wi-Fi Speed Up to 300 Mbps IEEE Roaming Standards 802.11k and IEEE 802.11v Number of antennas 2 Antenna type External dipole antennas Antenna gain 5 dBi WAN port 1x RJ-45 10/100 Mb/s LAN ports 4x RJ-45 10/100 Mb/s Gigabit Ethernet port No USB Port No AI Wi-Fi Optimizer Yes AI Parental Control Yes AI Assistant Yes Quality of Service D-Link QoS Health Mode Yes Ookla Speedtest WAN Connections Supported Static IP, Dynamic IP, PPPoE, PPTP, L2TP and DS-Lite IEEE 802.1p VLAN Support and IEEE 802.1Q Maximum concurrent sessions 32,000 Wi-Fi Security WPA, WPA2 and WPA3 Personal Stateful Packet Inspection Firewall DoS Protection Yes Anti-Spoofing Protection Yes IP and MAC Filtering Yes DMZ Yes WPS i Button Reset Yes Voice control Amazon Alexa and Google Assistant, depending on the region Management EAGLE PRO AI application and browser panel Supported application systems Android and iOS LED indicator Power supply and device status Supply voltage 12 V DC Supply current 1 A Operating temperature From 0°C to 40°C Storage temperature From -20°C to 65°C Operating humidity From 10% to 90%, non-condensing Dimensions 158 x 131.35 x 35.75 mm Net weight 150 g Gross weight 0.39 kg Color White Set contents D-Link R03 router, power supply, Ethernet cable and documentation
Ubiquiti E7-Campus - WiFi Access Point 7 For Large Facilities Built for campuses, educational institutions and office complexes - the Ubiquiti E7-Campus is a WiFi 7 access point that is not afraid of heavy loads. It supports more than 1,000 devices simultaneously and provides coverage over 465 m². With 10 GbE uplink, built-in directional antennas and UniFi Network support, it's an access point that you can fully customize to your network needs. WiFi 7 - More Bandwidth The Ubiquiti E7-Campus operates on WiFi 7 (802.11be), supporting 2.4 GHz and 5 GHz bands with maximum speeds of up to 688 Mbps and 8.6 Gbps, respectively. The device uses 10 spatial streams, which increases the efficiency of working with multiple users simultaneously. With this solution, it significantly outperforms WiFi 6 access points such as the U6-Pro and UAP-AC-PRO. Directional Antenna - Signal Focusing The internal directional antennas used, with up to 12 dBi gain, allow efficient coverage of a specific space - without wasting energy on a scattered signal. This solution is particularly well suited for outdoor areas or long corridors. The beamwidth is as wide as 100° x 55°, making it easy to precisely place access points on campus. Uplink 10 GbE - Network Performance Without Bottlenecks The access point is equipped with two Ethernet ports - 10 GbE and 1 GbE, so you can use the full capabilities of WiFi 7 without losing bandwidth. Such a connection eliminates latency and enables efficient transmission of large amounts of data. In UniFi-based networks, such an uplink significantly increases the efficiency of the entire infrastructure. Resistance and Installation - For Outdoor Applications. The Ubiquiti E7-Campus is IPX6 rated, which can be upgraded to IP67 with a kit that includes a sealing cover. The UV-resistant aluminum and polycarbonate housing ensures durability even in harsh weather conditions. Mounting on a wall, mast or VESA mount gives full configuration flexibility.
The company's FRITZ!Fon X6 DECT phone is a true all-rounder for telephony and the smart home. Full duplex HD support, including an integrated hands-free function, and an efficient battery enable long phone calls with high voice quality. In addition, smart home devices such as lamps and sockets can be switched directly from Fon X6. A freely assignable favorites button, a backlit keyboard and intuitive menu navigation support the user in telephony, navigation and use of services. Equipped with an answering machine, phone book, call blocking and convenience functions, the new FRITZ!Fon X6 also convinces with an excellent color display (2.4 inches) and longer battery life. Device type: analog telephone Color: black EAN4023125029660 Manufacturer number 20002966 Connection type analog Integrated answering machine Store phone book entries Redial Missed calls Handset connection Battery life Charging station dimensions (width x height x depth) 2.4" display Displays call duration, date and time, charging status, signal strength Features speed dial, hands-free calling, open listening, user guidance via menu, mute, backlit keyboard Equipped with DECT-eco, brightness and motion sensor Notices for connected products (EU Data Act) https://en.fritz.com/service/declarations/fritzbox/ Accessories available Dimensions Width: 51 mm x Height: 157.5 mm x Depth/Length: 17 mm
EB210 Pro Dual-Band Wi-Fi 7 BE3600 Router Dual-Band Wi-Fi 6 BE3600: Up to 2880 Mbps (5 GHz, EHT160) + up to 688 Mbps (2.4 GHz, EHT40) Multi-Gigabit Internet Connections: 1 x 2.5 Gbps WAN port, 1 x 2.5 Gbps LAN port, and 3 x 1 Gbps LAN ports for ultra-fast and flexible internet access Next-Gen Wi-Fi: Experience extreme Wi-Fi performance in network speed, efficiency, and capacity thanks to the latest technologies EasyMesh: Creates an intelligent mesh network with seamless coverage and high flexibility Remote Management: Supports TAUC (TP-Link Aginet Unified Cloud), TR-069, and TR-369 Upgrade Your Network to Wi-Fi 7EB210 Pro with Wi-Fi 7 delivers blazing-fast wireless speeds of up to 3.6 Gbps, enabling your devices to perform at peak performance. Experience smooth 4K/8K streaming, immersive AR/VR gaming, and lightning-fast downloads.Faster Wired and Wireless ConnectionsThe EB210 Pro offers not only blazing-fast wireless speeds of up to 3.6 Gbps but also blazing-fast wired connections. A 2.5 Gbps WAN and LAN port let you take full advantage of your local ISP's gigabit speeds. Break the 1 Gbps barrier and ensure your devices can operate at peak performance.USB 3.0 PortShare files between your devices. Simply connect an external drive to your router. You can even create your own cloud storage and securely access it from outside.Enhanced Wi-Fi Coverage Throughout Your HomeBeamforming technology and powerful antennas ensure Wi-Fi coverage adapts to your home and directs the signal to every device.Flexible Home Wi-Fi Mesh Network CreationThe EB210 Pro supports EasyMesh mesh networking. If your home has dead zones, simply add an EasyMesh-compatible router or extender to expand your home Wi-Fi mesh network. Forget about searching for a stable signal.Extensive Network SecurityWPA3 Encryption - High-performance password security and attack protection.Parental Controls - Block inappropriate content and limit time spent online.Guest Network - Create a separate network for your guests to maintain the security of your main network.Easy Setup and UseWhether you prefer the intuitive Aginet app or the extensive web interface, you can set up your device in minutes. The Aginet app allows you to manage network settings from your smartphone or tablet.TR-069/TR-369 Remote Management SupportISPs can remotely configure and manage devices via the ACS (Auto-Configuration Server) system or the Aginet ACS. High-level operations are possible thanks to support for the TR-181, TR-111, and TR-143 protocols. Meanwhile, home users can enjoy efficient service.Aginet Solution: End-to-End Management System for ISPsThe Aginet solution offers ISPs a comprehensive and flexible platform for managing multiple devices. Features include dynamic service provisioning, remote software updates, remote troubleshooting, and Wi-Fi Mesh diagnostics.
Teltonika OTD144 Outdoor Wi-Fi Router Teltonika OTD144 Outdoor Wi-Fi Router is a functional outdoor router designed to provide stable wireless and wired network access in harsh environmental conditions. The device combines LTE Cat 4 mobile connectivity with a Wi-Fi access point, enabling efficient distribution of the internet signal in open spaces and industrial facilities. The product is a suitable solution for video surveillance systems, urban infrastructure and telemetry data collection points, ensuring continuous data transmission in places without traditional cable connections. Hardware design, PoE power standards and IP55 resistance The router’s design is based on components enclosed in a sealed plastic housing with an IP55 protection rating, which guarantees resistance to weather conditions such as rain, dust and changing temperatures. The Teltonika OTD144 model has been equipped with two Ethernet ports, one of which supports PoE-in (power input), and the other PoE-out (power output). This technical solution allows data and power to be transmitted via a single structured cable, as well as direct power supply to another peripheral device, for example an external IP camera. Reliable mobile transmission thanks to Dual SIM Auto Failover Efficient network continuity is provided by the built-in LTE Cat 4 modem working with the Dual SIM system. The Auto Failover function allows two SIM cards from different mobile operators to be installed, protecting the infrastructure against sudden loss of connectivity in the event of a main network failure or a drop in radio signal strength. The router automatically switches traffic to the backup SIM card, which is very useful in unattended field installations where constant data transmission access is critical. Management via the RutOS operating system and integration with RMS The device operates under the control of the stable RutOS operating system, based on the OpenWRT Linux distribution, which provides extensive network configuration options and optimal data packet management. This software supports the creation of secure VPN tunnels, advanced firewall rules and Hotspot functions. Full compatibility with the Remote Management System (RMS) cloud platform enables administrators to remotely monitor signal parameters, change settings and carry out hardware diagnostics without the need to be physically present at the installation site. Simple field installation and advanced security features The Teltonika OTD144 router features an integrated mounting bracket, which simplifies and shortens the installation process on masts or building walls. The security of transmitted information in the wireless structure is protected by current Wi-Fi encryption standards. The device allows logical separation of user traffic by creating isolated subnets, which increases data protection and makes it easier to deploy secure public access points in urban spaces. Technical data Parameter Value Brand Teltonika Model OTD144 Device type Outdoor mobile router (Outdoor Router) Mobile technology LTE Cat 4 (up to 150 Mb/s) SIM card support Dual SIM with Auto Failover function Wireless connectivity Wi-Fi (with Hotspot function) Wired interfaces 2 x Ethernet RJ45 (1 x PoE-in, 1 x PoE-out) Operating system RutOS (based on OpenWRT Linux) Security Firewall, VPN (OpenVPN, IPsec), Wi-Fi encryption Enclosure protection rating IP55 (weather resistance) Remote management Compatible with Teltonika Remote Management System (RMS) Key advantages IP55 weather resistance: The robust housing structure protects the components from rain, dust and external factors. Dual SIM technology: The Auto Failover mechanism automatically switches the connection to the backup card in the event of a network failure. PoE power and distribution: PoE-in support simplifies cabling, while the PoE-out port allows additional peripheral devices to be powered. RutOS software: The operating system provides advanced routing, Firewall configuration and VPN security features. Integrated bracket: The factory mounting design makes it easier to install the equipment securely in the intended location. The product is a proposal for Installers of outdoor IP surveillance systems looking for a stable router with the ability to power cameras via PoE-out. Administrators of urban and industrial networks who need an efficient Wi-Fi access point for use in open spaces. Companies carrying out telemetry and industrial automation projects that require a stable LTE connection in harsh environmental conditions.
Kõikehõlmav IoT-värav MikroTik KNOT LR8G komplekt on täiustatud tööstuslik IoT-värav, mis on loodud mitme kommunikatsioonitehnoloogia ühendamiseks ühte kompaktse seadmesse. See toetab LoRa® pikaulatuslikke, madala võimsusega andurivõrke, LTE CAT-M1 ja NB-IoT mobiilsideandmeid, 2,4 GHz Wi-Fi kohalikku ühenduvust ja Bluetooth 5.2 energiatõhusat andurite integreerimist. GPS-funktsionaalsus tagab täpse positsioneerimise ja aja sünkroniseerimise, mistõttu seade sobib mobiilseteks ja kaugkasutusteks. See paindlikkus võimaldab ettevõtetel ühendada ja hallata tuhandeid seadmeid, alates nutikate arvestite ja keskkonnasensoritest kuni jälgimis- ja logistikaseadmeteni. Integreeritud LoRa®-liides töötab 868 MHz sagedusalas, tagades stabiilse pikamaa-side häiretele kalduvates keskkondades. Paindlikkust silmas pidades loodud KNOT LR8G pakub mitmeid ühenduvusvõimalusi, mis sobivad erinevate rakendustega. Seade on varustatud kahe Fast Etherneti pordiga (10/100 Mbps). Esimene port toetab PoE-in-i, mis võimaldab seadmel saada toidet otse võrgukaabli kaudu, samas kui teine port pakub PoE-out-i, et toita lisaseadet, näiteks kaamerat või juurdepääsupunkti, vähendades kaabelduse keerukust. Traadita ühenduvus hõlmab 2,4 GHz Wi-Fi (802.11b/g/n) kliendi- või haldusühenduste jaoks, samuti Bluetooth 5.2 andurite side ja majakarakenduste jaoks. Mobiilside ühenduvust täiustab LTE CAT-M1 ja NB-IoT tugi, tagades usaldusväärse toimivuse piiratud traadiga internetiühendusega piirkondades. Spetsiaalsed antennipistikud LTE, LoRa® ja GNSS (GPS) jaoks võimaldavad kasutajatel ühendada suure võimsusega antenne laiema katvuse saavutamiseks. Tööstusliku taseme jõudlus MikroTik KNOT LR8G komplekt on loodud nõudlikele professionaalsetele keskkondadele. See töötab 650 MHz protsessori, 64 MB RAM-i ja 128 MB NAND-mälu toel ning kasutab RouterOS v7 litsentsitasemega 4, pakkudes täiustatud marsruutimise, turvalisuse ja haldusfunktsioone. Seade toetab Modbus, RS485 ja GPIO integreerimiseks tööstuslike kontrollerite, andurite ja vanemate süsteemidega. Samuti on sellel microUSB OTG port lisaseadmete ühendamiseks. Riistvara disain tagab energiatõhususe, võimsustarbimisega umbes 6 W, pakkudes samal ajal stabiilset jõudlust 24/7. Tugev konstruktsioon võimaldab usaldusväärset töötamist rasketes keskkondades, laias temperatuurivahemikus −40 °C kuni +70 °C ja niiskustaluvusega kuni 95% kondenseerumata. Seade sisaldab kinnitusklambreid seina- või DIN-siini paigaldamiseks, tagades lihtsa integreerimise juhtimiskappidesse, sõidukitesse või tööstuslikesse korpustesse. KNOT LR8G komplekt ühendab kompaktse disaini professionaalse vastupidavusega. Selle korpus on mõeldud tööstuslikuks kasutamiseks, pakkudes pikaajalist töökindlust nutikas infrastruktuuris ja missioonikriitilistes süsteemides. Seade toetab mitmeid toiteallikaid, sealhulgas PoE, DC-pistikupesa või microUSB, pakkudes paindlikkust kasutamiseks erinevates toiteallikate keskkondades. Iga traadita liidese antennipistikud võimaldavad optimeeritud jõudlust pikamaa- või suure tihedusega rakendustes. Turvalisust ja stabiilsust tugevdavad RouterOS-i funktsioonid, nagu VPN, tulemüür, VLAN ja liikluse haldus, tagades turvalise integreerimise ettevõtte võrkudesse. Värav võimaldab IoT-süsteemide sujuvat laiendamist ilma suurte infrastruktuurikuludeta, tänu võimele ühendada LoRa® andurid IP- või mobiilsidevõrkudega.
Compact industrial router with RS485 Teltonika RUT145 (RUT145000000) is an industrial Ethernet router with 2 Fast Ethernet ports and a native RS485 serial port, designed for use in automation, manufacturing and other environments requiring stable wired connectivity. The device runs on the RutOS system, offering full network functionality, industrial-grade security and native support for protocols such as Modbus, DLMS/COSEM, DNP3 and OPC UA. Thanks to its compact design and DIN rail mounting option, the router can be easily installed in crowded control cabinets. Key advantages Industrial RS485 solution – the native RS485 serial port allows older or specialised automation devices to be connected to an IP network without the need for additional gateways. Stable wired connectivity – 2 Fast Ethernet ports (10/100 Mb/s), one as WAN and the other as LAN, provide flexible network topology and wired backhaul without compromising stability. Remote configuration and monitoring – full integration with Teltonika RMS enables remote management of router fleets, firmware updates and link status analysis from a single dashboard. Industrial protocol control – native support for Modbus, DLMS/COSEM, DNP3, OPC UA and BACnet, among others, means the RUT145 acts as a gateway and data converter between field devices and the cloud or server. Robust industrial design – anodised aluminium housing, wide operating temperature range (‑40 °C to +75 °C) and a 3-pin power connector demonstrate reliability in harsh conditions. Wi‑Fi 4 for the local area – the 802.11b/g/n wireless network supports up to 50 simultaneous users, enabling local connection of mobile and service devices without the need for additional access points. Industrial applications Teltonika RUT145 is designed for applications where the stability of a wired Ethernet network and the ability to connect devices with serial interfaces are key. In practice, it acts as a gateway between RS‑485 and IP, so it is used in power stations, water and sewage installations, smart buildings, production lines and refrigeration systems, among others. It requires only a constant 9–30 VDC power supply and standard network cabling, which shortens deployment time and reduces infrastructure costs. Industrial protocols and gateways The router supports numerous industrial protocols, allowing data to be collected from meters, control systems and sensors without the need to program custom gateways. In Modbus mode, it works as a client or server (TCP/RTU), supports extended data formats (8-, 16- and 32-bit types) and allows custom register block configuration. DNP3 and DLMS/COSEM enable integration of energy meters and utility installations, while OPC UA allows router data to be exposed as services on the factory network. Security and VPN In terms of security, Teltonika RUT145 offers a complete set of mechanisms: a firewall with traffic rules, NAT, DMZ, NTP time synchronisation, DDOS attack library (SYN flood, port scanning), as well as numerous VPN types: OpenVPN, IPsec, WireGuard, L2TP, PPTP, SSTP, ZeroTier and Tinc. This makes it possible to securely connect branches, machines and servers to the cloud while limiting access only to defined services and users. It is also recommended to use X.509 credentials and Let’s Encrypt certificates to secure HTTPS connections. Network monitoring and management The RUT145 router supports functions such as QoS/SQM, VLAN, IGMP Proxy, multi-WAN load balancing and failover (e.g. between Wi‑Fi and Ethernet). In an industrial environment, hotspots can be used so that service technicians and partners have controlled access to the factory network, with a limit on the number of users and traffic filtering. On the administrator side, the system offers network topology mapping, firewall statistics, event logs, traffic usage reports and integration with IoT platforms (ThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core). Technical specification and power supply At the heart of the device is a 580 MHz Mediatek processor, 128 MB DDR2 RAM and 16 MB of NOR Flash memory, providing sufficient performance for industrial and IoT applications. The box occupies very little space (113.1 × 25 × 68.6 mm) and weighs just 140 g, and is powered via a 3-pin terminal in the 9–30 VDC range with protection against reverse polarity and surge pulses. In standby mode, power consumption is below 1 W, which translates into low operating costs in 24/7 installations. Passive PoE power supply via the LAN1 port is also possible, provided compatible power supplies are used. API, scripts and IoT RutOS provides an extensive HTTP(S) API and support for MQTT protocols, enabling integration of external applications with servers and the cloud. The “Data to Server” function allows parameters to be collected from various sources (serial interfaces, industrial protocols, sensors) and sent in a single package to the server. Combined with the Modbus MQTT Gateway module, the user can remotely send commands to field devices and receive data without the need to write custom application software. All rules can be refined using LUA scripts, supported in the RutOS environment.
The SNMP Manager NG is a powerful network management card that enables secure and comprehensive remote monitoring and control of UPS systems and other connected devices. With its broad protocol support and seamless integration into IT infrastructures, it is ideal for data centers and industrial environments. Advanced security features, flexible connectivity, and comprehensive notification options ensure maximum visibility and operational reliability. Type LAN adapter EAN 4260074984958 Manufacturer No. 10131023 RJ-45 connectors 1
SpecificationsOutput Voltage 24 VOutput Rating 1A (18W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
The CS22D 2-Port USB DVI KVM Switch is a control unit that allows access to two computers from a single USB and DVI console (keyboard, video and mouse). With the CS22D, you can access the computers conveniently via a Remote Port Selector.- One DVI-D video console controls two DVI-D USB interface computers.- Computer Selection via Remote Port Selector.- OS Support: Windows 2000, Windows XP, Windows Vista, 7, Mac, Sun and Linux.- Superior video quality- up to 1920 x 1200@60Hz.- Supports USB hot-plugging.- Non-powered.- Supports USB 2.0 device.DesignNumber of Hosts 2Supported Maximum Resolution 1920 x 1200 Resolution (pixels)Device Switchoveron the DeviceLEDPort 2Terminal-Device ConnectionsUSB 2DVI-I 1Connections per ComputerUSB 1DVI-D 1Product dimensions 100 x 30 x 94 mmWeight 330 grams
Plug and Play Compatibility Use the Ubiquiti PAK-620 Precision Alignment Kit with any of these dish antennas: airFiber® AF-5G30-S45, PowerBeam™ PBE-5AC-620, PowerBeam PBE-M5-620, and RocketDish™ RD-5G30-LW. Optimal Link Deployment Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance.
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STR / RSTP / MSTP• Access Control List• MikroTik neighbour discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• SNMP v2/v3• rackmount• IEEE 802.3ad and static link aggregation Switching resultsCRS328-24P-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-24P-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
Features- One USB-PS/2 console controls up to 16 computers- Daisy-chain up to 31 additional units - control up to 512 computers from a single console- Front accessible USB port allows each computer to access USB peripherals*- Dual Interface - supports computers and console with PS/2 or USB keyboards and mice- Multiplatform support - Windows, Linux, Mac and Sun- Video DynaSync™ - stores the console monitor's EDID (Extended Display Identification Data) to optimize display resolution- Supports USB keyboards for PC, Mac and Sun- Auto PS/2 and USB interface detection- USB / PS/2 keyboard and mouse emulation - computers boot even when the console focus is elsewhere- Superior video quality - up to 2048 x 1536; DDC2B- No software required - convenient computer selection via front panel pushbuttons, hotkeys and multilingual on-screen display (OSD) menus- Auto-senses station's position on daisy-chained installations; no need for manual dip switch setting; front panel led indicates station's position- Port names automatically reconfigured when station sequence is changed- Two level password security; only authorized users view and control computers; up to four users and an administrator with separate profiles for each- Auto Scan feature for monitoring user-selected computers- Broadcast Mode - operation simultaneously performed on all selected computers... etc- Hot pluggable - add or remove computers without having to power down the switch- Buzzer on/off via hotkey and OSD- Firmware upgrades to all the chained KVM switch at the same time via the daisy-chain cable- Rack mountable in 19" system rack (1U)* The USB peripheral function only works with USB cable set connections. It will not work with PS/2 cable set connections.Package Contents- 1x KVM Switch with Standard Rack Mounting Kit- 1x 2L-5202P PS/2 KVM Cable- 1x 2L-5202U USB KVM Cable- 1x LIN5-27X6-U21G Console Cable- 1x Firmware Upgrade Cable- 1x Foot Pad Set(4 PCS)- 1x 0AD6-1605-24EG Power Adapter- 1x User InstructionsEthernet LANEiKontrollitavate arvutite arv16Klaviatuuri pordi tüüpEiHiire pordi tüüpEiVideopordi tüüpVGAUSB 2.0 portide arv1DC-pistikJahMaksimaalne resolutsioon2048 x 1536 pikslitPüstikmontaaž1UToote värvMustLED-indikaatoridVõimsusMaterjalMetallSisseehitatud ekraanEiSkaneerimisintervall255 sVõimsustarve (tüüpiline)6,6 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahLaius433 mmSügavus160 mmKõrgus44 mmKaal2,85 kgJuhendJahÜhenduvustehnoloogiaJuhtmega ühendatudToitenõudedDC 5.3 VI/O-pordid1 x RJ-11
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 plug Wiring type: FTP-shielded 4 twisted-pair kaabel Lisaandmed: This splitter enables you to double a fixed võrguseade connection, without the need, 8P8C LAN FTP port combiner/splitter adapter värv: Aluminum kõrgus: 25 mm laius: 68 mm pikkus: 200 mm
hEX PoE lite is a small five port ethernet router in a plastic case it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port Ethernet ports are shielded. It is affordable small and easy to use. With it’s compact design and clean looks it will fit perfectly into any SOHO environment.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 19.500 A, erhöhter Berührungsschutz, Master-Slave-Funktion (1x Master / 5x Slave), einstellbare Schaltwelle (ca. 8 bis 80 W), zweipoliger Ein-/Ausschalter, Gesamtleistung max. 16 A / 3.500 W, Stecksystem DE (Stecker-Typ F)
