• 8 Gigabit PoE ports and 4 Gigabit SFP slots • Total PoE power budget: 240W, up to 30W per port • Supports IPv4/IPv6 network operation • Minimize carbon footprint with advanced energy efficient technology (IEEE 802.3az) • Supports Operations, Administration, and Maintenance (OAM) mechanisms • Ethernet Ring Protection Switching (ERPS) for Ethernet ring topologies with sub-50 ms failover capabilities • 40°C to 75°C operating temperature range • Redundant power inputs with Terminal Block
Industrial LTE Cat 4 Gateway Board TRB140 is equipped with a single Ethernet port, Digital Inputs/Outputs and micro-USB port. TRB140 compact design makes this Gateway perfect for an application where a sole gadget must be granted reliable Internet connectivity. TRB140 is engineered to be used in an Industrial application therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.MobileLTE(Cat4)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTEEthernet1 x 10/100/1000 MbpsInput/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketConfiguration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)Remote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight35 g
• IEEE 802.3af/at PoE compliant to simplify deployment and installation • 10/100/1000Mbps wire speed transmission and reception • Auto-detection and protection of non-standard PoE devices • IEEE 802.3x Flow Control protects against lost packets for reliable data transmission • Total PoE power budget: 120W, up to 30W per port
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two screws.
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: valge
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
airFiber 11Breaking free from the congested 5 GHz band, airFiber® 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications.Features: Full duplex Point-to-Point radio 11 GHz frequency operation Up to 1.2+ Gbps throughput Proprietary INVICTUS™ processor Integrates with airFiber® 11 GHz antennas Utilizes distinct Rx and Tx frequencies Accepts PoE or DC power Secure 128-bit AES encryption Power Source Options Support for PoE or DC power gives you the flexibility to power the AF-11 separately from Ethernet traffic. Reversible Duplexers Each duplexer has a low channel and a high channel that can be configured by simply reversing the position of the duplexer. Channel Configuration The airFiber AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific licensing requirements. The AF-11 also features different channel widths to suit your deployment needs, and you can independently configure TX and RX channel frequencies
TRB255TRB255 is an industrial Gateway equipped with a number of Input/Output Serial Ethernet ports and LPWAN modem. With backwards compatibility to EGPRS (2G) network legacy industrial devices can be upgraded for extended use and support of LTE Cat M1 and NB-IoT ensures long lifecycle. Number of all features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.Industrial Gateway TRB255 is equipped with LPWAN modem GNSS receiver Ethernet port durable 16 pin connector block. This Gateway board packs all essential features in one package: secure power connector I/O ports serial communication fast and reliable internet connection for industry applications where long lifecycle option is a must. TRB255 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of hardware and software features such as LTE Cat M1 NB-IoT SMS control Firewall open VPN IPSec RMS user can be ensured that data can be reached securely and without compromises. Without this backward compatibility to EGPRS (2G) networks allows upgrade already working devices and ensures that after 2G network switch off your equipment will be accessible with support of LTE Cat M1 NB-IoT.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, beleuchteter Fußschalter mit 1,5 m langer Steuerleitung, 2x permanente Steckdosen, 4x schaltbare Steckdosen, Stecksystem DE (Stecker-Typ F)
Specifications Output Voltage 24 V Output Rating 1A (24W) Input Voltage AC 100~240V Input Frequency 50~60Hz Operating Temperature 0C~+40C Storage Temperature -20C~+85C
24-Port PoE Gigabit Smart Switch, 24x 10/100/1000Mbit/s TP (RJ-45) Port davon 12 x PoE 802.3af/802.3at, 802.3x Flow Control, statisches Trunking, bis zu 4 Ports in bis zu 8 Gruppen, Loopback Detection, 802.1Q VLAN
