Approvals FCC Class A, CE Connector LC Dimensions 71 x 94 x 26 mm (2.80 x 3.70 x 1.02 inches) Fiber 2 x SFP Slot Humidity 5% ~ 90% non-condensing IEEE IEEE 802.3ae 10GBaseR, Complies with SFF-8431 LED Power, F/O1, F/O2 Link Budget *See SFP Specifications Max Tx Power *See SFP Specifications Min Tx Power *See SFP Specifications Operating Temperature 0° ~ 50° C Power DC 5V, 2A 50, 60 Hz 100VAC ~ 240VAC Power Consumption DC 4.3W; AC 5.8W Sensitivity *See SFP Specifications Storage Temperature -20° ~ 60° C Typical Distance *See SFP Specifications Warranty 5 Years Wave length *See SFP Specifications Weight 0.6 Kg
AC Input Voltage 88~132VAC / 176~264VAC Selected by Switch AC Inrush Current Cold Start 35A DC Output Voltage 5 Volts EMC EN55022 (CISPR22) Class B, EN61000-3-2/3 EMC Immunity EN61000-4-2/3/4/5/6/8/11, EN55024 Humidity 20 ~ 90% non-condensing Operating Temperature -10 ~ 60°C (refer to output derating curve) Overload Protection Shutdown o/p voltage, re-power on to recover Rated Current 30A Safety Standards UL1012, UL60950-1, TUV EN60950-1, CCC GB4943 Setup 100ms, 50ms at full load Warranty 5 Years Weight 2.75 lbs.
DC Input Voltage 36 ~ 72 VDC DC Output Voltage 5 Volts EMC EN55022 (CISPR22) Class B EMC Immunity EN61000-4,2,3,4,6,8 Humidity 20 ~ 90% non-condensing Operating Temperature -10 ~ 60°C Overload Protection Hiccup mode, recovers automatically after fault condition is removed Rated Current 20A Setup 2 seconds Warranty 5 Years Weight 2.45 lbs.
Approvals EMI: FCC Class A CE-EN6100-4-2/3/4/5/6/8/11/12 CE-EN6100-6-2/4 Safety: UL/cUL Class I, Division 2 CE-EN60950-1 Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Connector SC (Single-Mode, 30Km) Dimensions IP-30, 30 x 95 x 140 mm (1.18 x 3.74 x 5.51 inches) Dip Switch 1. ON: Enables Port/Power Alarm OFF: Disables Port/Power Alarm 2. ON: Enables LLF and LFP OFF: Disables LLF and LFP 3. ON: 100BaseFX Half-Mode OFF: 100BaseFX Full-Mode 4. ON: 100BaseTX Full-Duplex Mode OFF: Auto Negotiation Ethernet 10/100BaseT: 1 x RJ45 Connector Fiber Core 9/125um ~ 10/125um Humidity 5% ~ 90% non-condensing IEEE IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/FX IEEE 802.3x Flow Control and Back-Pressure LED Unit: Power, Power1, Power2(Green), Fault (Red) Fiber: Link/Activity(Green), Half/Full-Duplex(Yellow) Ethernet: Link/Activity(Green), 100M (Yellow) Link Loss Forward (TX-Fiber) If TX port link down, will force Fiber port to link down (Fiber-TX) If Fiber port link down, will force TX port to link down Method Store and Forward Operating Temperature -10° ~ 70° C (14° ~ 158° F) Overload Current Protection Present Power 12 to 48 VDC; Redundant inputs Power Consumption 2.74 Watts Reverse Polarity Power Protection Present Storage Temperature -40° ~ 85° C Typical Distance 30Km Warranty 5 Years Wave length 1310nm
Approvals EMI: FCC Class A CE-EN6100-4-2/3/4/5/6/8/11/12 CE-EN6100-6-2/4 Safety: UL/cUL Class I, Division 2 CE-EN60950-1 Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Connector SC (Single-Mode, 30Km) Dimensions IP-30, 30 x 95 x 140 mm (1.18 x 3.74 x 5.51 inches) Dip Switch 1. ON: Enables Port/Power Alarm OFF: Disables Port/Power Alarm 2. ON: Enables LLF and LFP OFF: Disables LLF and LFP 3. ON: 100BaseFX Half-Mode OFF: 100BaseFX Full-Mode 4. ON: 100BaseTX Full-Duplex Mode OFF: Auto Negotiation Ethernet 10/100BaseT: 1 x RJ45 Connector Fiber Core 9/125um ~ 10/125um Humidity 5% ~ 90% non-condensing IEEE IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/FX IEEE 802.3x Flow Control and Back-Pressure LED Unit: Power, Power1, Power2(Green), Fault (Red) Fiber: Link/Activity(Green), Half/Full-Duplex(Yellow) Ethernet: Link/Activity(Green), 100M (Yellow) Link Loss Forward (TX-Fiber) If TX port link down, will force Fiber port to link down (Fiber-TX) If Fiber port link down, will force TX port to link down Method Store and Forward Operating Temperature -40° ~ 80° C (-40° ~ 176° F) Overload Current Protection Present Power 12 to 48 VDC; Redundant inputs Power Consumption 2.74 Watts Reverse Polarity Power Protection Present Storage Temperature -40° ~ 85° C Typical Distance 30Km Warranty 5 Years Wave length 1310nm
Approvals EMI: FCC Class A CE-EN6100-4-2/3/4/5/6/8/11/12 CE-EN6100-6-2/4 Safety: UL/cUL CE-EN60950-1 Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Connector ST (Single-Mode) Dimensions IP-30, 30 x 95 x 140 mm (1.18 x 3.74 x 5.51 inches) Dip Switch 1. ON: Enables Port/Power Alarm OFF: Disables Port/Power Alarm 2. ON: Enables LLF and LFP OFF: Disables LLF and LFP 3. ON: 100BaseFX Half-Mode OFF: 100BaseFX Full-Mode 4. ON: 100BaseTX Full-Duplex Mode OFF: Auto Negotiation Ethernet 10/100BaseT: 1 x RJ45 Connector Fiber Core 9/125um ~ 10/125um Humidity 5% ~ 90% non-condensing IEEE IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/FX IEEE 802.3x Flow Control and Back-Pressure LED Unit: Power, Power1, Power2(Green), Fault (Red) Fiber: Link/Activity(Green), Half/Full-Duplex(Yellow) Ethernet: Link/Activity(Green), 100M (Yellow) Link Loss Forward (TX-Fiber) If TX port link down, will force Fiber port to link down (Fiber-TX) If Fiber port link down, will force TX port to link down Method Store and Forward Operating Temperature -10° ~ 70° C (14° ~ 158° F) Overload Current Protection Present Power 12 to 48 VDC ; Redundant inputs Power Consumption 2.74 Watts Reverse Polarity Power Protection Present Storage Temperature -40° ~ 85° C Typical Distance 30Km Warranty 5 Years Wavelength 1310nm
Approvals EMI: FCC Class A CE-EN6100-4-2/3/4/5/6/8/11/12 CE-EN6100-6-2/4 Safety:UL cUL CE-EN60950-1 Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Connector SC (Single-Mode WDM) Dimensions IP-30, 30 x 95 x 140 mm (1.18 x 3.74 x 5.51 inches) Dip Switch 1. ON: Enables Port/Power Alarm OFF: Disables Port/Power Alarm 2. ON: Enables LLF and LFP OFF: Disables LLF and LFP 3. ON: 100BaseFX Half-Mode OFF: 100BaseFX Full-Mode 4. ON: 100BaseTX Full-Duplex Mode OFF: Auto Negotiation Ethernet 10/100BaseT: 1 x RJ45 Connector Fiber Core 9/125um ~ 10/125um Humidity 5% ~ 90% non-condensing IEEE IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/FX IEEE 802.3x Flow Control and Back-Pressure LED Unit: Power, Power1, Power2(Green), Fault (Red) Fiber: Link/Activity(Green), Half/Full-Duplex(Yellow) Ethernet: Link/Activity(Green), 100M (Yellow) Link Loss Forward (TX-Fiber) If TX port link down, will force Fiber port to link down (Fiber-TX) If Fiber port link down, will force TX port to link down Method Store and Forward Operating Temperature -10° ~ 70° C (14° ~ 158° F) Overload Current Protection Present Power 12 to 48 VDC; Redundant inputs Power Consumption 2.74 Watts Reverse Polarity Power Protection Present Storage Temperature -40° ~ 85° C Typical Distance 20Km Warranty 5 Years Wave length TX: 1310nm RX: 1550nm
Approvals EMI: FCC Class A CE-EN6100-4-2/3/4/5/6/8/11/12 CE-EN6100-6-2/4 Safety: UL cUL CE-EN60950-1 Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Connector SC (Single-Mode WDM) Dimensions IP-30, 30 x 95 x 140 mm (1.18 x 3.74 x 5.51 inches) Dip Switch 1. ON: Enables Port/Power Alarm OFF: Disables Port/Power Alarm 2. ON: Enables LLF and LFP OFF: Disables LLF and LFP 3. ON: 100BaseFX Half-Mode OFF: 100BaseFX Full-Mode 4. ON: 100BaseTX Full-Duplex Mode OFF: Auto Negotiation Ethernet 10/100BaseT: 1 x RJ45 Connector Fiber Core 9/125um ~ 10/125um Humidity 5% ~ 90% non-condensing IEEE IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/FX IEEE 802.3x Flow Control and Back-Pressure LED Unit: Power, Power1, Power2(Green), Fault (Red) Fiber: Link/Activity(Green), Half/Full-Duplex(Yellow) Ethernet: Link/Activity(Green), 100M (Yellow) Link Loss Forward (TX-Fiber) If TX port link down, will force Fiber port to link down (Fiber-TX) If Fiber port link down, will force TX port to link down Method Store and Forward Operating Temperature -10° ~ 70° C (14° ~ 158° F) Overload Current Protection Present Power 12 to 48 VDC; Redundant inputs Power Consumption 2.74 Watts Reverse Polarity Power Protection Present Storage Temperature -40° ~ 85° C Typical Distance 20Km Warranty 5 Years Wave length TX: 1550nm RX: 1310nm
Ambient Relative Humidity 5% to 95%, (non-condensing) Certifications FCC, CE Dimensions 26 x 95 x 75 mm (W x H x D) EMI FCC Part 15 Subpart B Class A, CE EN 55032 Class A, EN 61000-6-4 Class A EMS CE EN 55024 Class A EN 61000-6-2 Class A IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (Magnetic Field) Ethernet Port 1*RJ45 Port w/10/100/1000T(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Port 1*1000 SC/ST type connector Multi-mode: 50/125um or 62.5/125um Single-mode: 9/125um or 10/125um Flow Control IEEE 802.3x back pressure flow control Free Fall / Shock / Vibration IEC60068-2-32 / IEC60068-2-27 / IEC60068-2-6 Green RoHS Compliant Housing Metal, IP30 protection Input Voltage 12 to 48VDC, Redundant Input Jumbo Frame 10K bytes LED Indicators Power (PWR): On / Off Fiber Port (GFX): Link / Act Ethernet Port: Link / Act MAC Table Size 8K Memory Buffer 1Mbit Mounting DIN-Rail, Wall Mounting (optional) Operating Temperature -10°C to 70°C Overload Current Protection Present Power Connection 1 removable 4-contact terminal block Power Consumption 2.2 Watts for system Processing Type Store and Forward Protocols CSMA/CD Reverse Polarity Protection Present Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Fiber Storage Temperature -40°C to 85°C Warranty 5 Years Wavelength Depends on fixed fiber modules Weight Unit: 0.595 lb. Shipping: 0.86 lb.
Ambient Relative Humidity 5% to 95%, (non-condensing) Certifications FCC, CE Dimensions 26 x 95 x 75 mm (W x H x D) EMI FCC Part 15 Subpart B Class A, CE EN 55032 Class A, EN 61000-6-4 Class A EMS CE EN 55024 Class A EN 61000-6-2 Class A IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (Magnetic Field) Ethernet Port 1*RJ45 Port w/10/100/1000T(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Port 1*1000 SC/ST type connector Multi-mode: 50/125um or 62.5/125um Single-mode: 9/125um or 10/125um Flow Control IEEE 802.3x back pressure flow control Free Fall / Shock / Vibration IEC60068-2-32 / IEC60068-2-27 / IEC60068-2-6 Green RoHS Compliant Housing Metal, IP30 protection Input Voltage 12 to 48VDC, Redundant Input Jumbo Frame 10K bytes LED Indicators Power (PWR): On / Off Fiber Port (GFX): Link / Act Ethernet Port: Link / Act MAC Table Size 8K Memory Buffer 1Mbit Mounting DIN-Rail, Wall Mounting (optional) Operating Temperature -40°C to 80°C Overload Current Protection Present Power Connection 1 removable 4-contact terminal block Power Consumption 2.2 Watts for system Processing Type Store and Forward Protocols CSMA/CD Reverse Polarity Protection Present Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Fiber Storage Temperature -40°C to 85°C Warranty 5 Years Wavelength Depends on fixed fiber modules Weight Unit: 0.595 lb. Shipping: 0.86 lb.
Ambient Relative Humidity 5% to 95%, (non-condensing) Certifications FCC, CE Dimensions 26 x 95 x 75 mm (W x H x D) EMI FCC Part 15 Subpart B Class A, CE EN 55032 Class A, EN 61000-6-4 Class A EMS CE EN 55024 Class A EN 61000-6-2 Class A IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (Magnetic Field) Ethernet Port 1*RJ45 Port w/10/100/1000T(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Port 1*1000 SC/ST type connector Multi-mode: 50/125um or 62.5/125um Single-mode: 9/125um or 10/125um Flow Control IEEE 802.3x back pressure flow control Free Fall / Shock / Vibration IEC60068-2-32 / IEC60068-2-27 / IEC60068-2-6 Green RoHS Compliant Housing Metal, IP30 protection Input Voltage 12 to 48VDC, Redundant Input Jumbo Frame 10K bytes LED Indicators Power (PWR): On / Off Fiber Port (GFX): Link / Act Ethernet Port: Link / Act MAC Table Size 8K Memory Buffer 1Mbit Mounting DIN-Rail, Wall Mounting (optional) Operating Temperature -10°C to 70°C Overload Current Protection Present Power Connection 1 removable 4-contact terminal block Power Consumption 2.2 Watts for system Processing Type Store and Forward Protocols CSMA/CD Reverse Polarity Protection Present Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Fiber Storage Temperature -40°C to 85°C Warranty 5 Years Wavelength Depends on fixed fiber modules Weight Unit: 0.595 lb. Shipping: 0.86 lb.
Back Plane 2Gbps Certifications FCC, CE, UL 61010-1, UL 61010-2-201 Compliance NEMA TS1/TS2 Dimensions 26 x 95 x 75 mm EMI FCC Class A, CE-EN6100-4-2/3/4/5/6/8/11/12, CE-EN6100-6-2/4 Ethernet Port 1 x 10/100/1000TX RJ-45 Fiber Port 1 x 100/1000TX SFP Free Fall IEC 60068-2-32 Humidity 5% ~ 95% non-condensing IEEE Compliance IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/FX IEEE 802.3ab 1000BaseT IEEE 802.3x Flow Control and Back-Pressure IEEE 802.3z 1000BaseSX/LX LED Indicators Power (PWR): On / Off Ethernet: On-Link / Flashing- Data Transmitting SFP: Link & Active MAC Table Size 8K Method Store and Forward Operating Temperature -40° ~ 80° C Power Consumption 1.8 Watts Power Input 12 ~ 48 VDC Power Redundancy Yes Protocols CSMA/CD Shock IEC 60068-2-27 Storage Temperature -40° ~ 85° C Transfer Rate 14,880pps for Ethernet Port 148,800pps for Fast Ethernet Port 1,148,800pps for Fast Gigabit Port Vibration IEC 60068-2-6 Warranty 5 Years
Ambient Relative Humidity 5% to 95%, (non-condensing) Certifications FCC, CE Dimensions 26 x 95 x 75 mm (W x H x D) EMI FCC Part 15 Subpart B Class A, CE EN 55032 Class A, EN 61000-6-4 Class A EMS CE EN 55024 Class A EN 61000-6-2 Class A IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (Magnetic Field) Ethernet Port 1*RJ45 Port w/10/100/1000T(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Port 1*1000 SC/ST type connector Multi-mode: 50/125um or 62.5/125um Single-mode: 9/125um or 10/125um Flow Control IEEE 802.3x back pressure flow control Free Fall / Shock / Vibration IEC60068-2-32 / IEC60068-2-27 / IEC60068-2-6 Green RoHS Compliant Housing Metal, IP30 protection Input Voltage 12 to 48VDC, Redundant Input Jumbo Frame 10K bytes LED Indicators Power (PWR): On / Off Fiber Port (GFX): Link / Act Ethernet Port: Link / Act MAC Table Size 8K Memory Buffer 1Mbit Mounting DIN-Rail, Wall Mounting (optional) Operating Temperature -10°C to 70°C Overload Current Protection Present Power Connection 1 removable 4-contact terminal block Power Consumption 2.2 Watts for system Processing Type Store and Forward Protocols CSMA/CD Reverse Polarity Protection Present Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Fiber Storage Temperature -40°C to 85°C Warranty 5 Years Wavelength Depends on fixed fiber modules Weight Unit: 0.595 lb. Shipping: 0.86 lb.
Ambient Relative Humidity 5% to 95%, (non-condensing) Certifications FCC, CE Dimensions 26 x 95 x 75 mm (W x H x D) EMI FCC Part 15 Subpart B Class A, CE EN 55032 Class A, EN 61000-6-4 Class A EMS CE EN 55024 Class A EN 61000-6-2 Class A IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (Magnetic Field) Ethernet Port 1*RJ45 Port w/10/100/1000T(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Port 1*1000 SC/ST type connector Multi-mode: 50/125um or 62.5/125um Single-mode: 9/125um or 10/125um Flow Control IEEE 802.3x back pressure flow control Free Fall / Shock / Vibration IEC60068-2-32 / IEC60068-2-27 / IEC60068-2-6 Green RoHS Compliant Housing Metal, IP30 protection Input Voltage 12 to 48VDC, Redundant Input Jumbo Frame 10K bytes LED Indicators Power (PWR): On / Off Fiber Port (GFX): Link / Act Ethernet Port: Link / Act MAC Table Size 8K Memory Buffer 1Mbit Mounting DIN-Rail, Wall Mounting (optional) Operating Temperature -40°C to 80°C Overload Current Protection Present Power Connection 1 removable 4-contact terminal block Power Consumption 2.2 Watts for system Processing Type Store and Forward Protocols CSMA/CD Reverse Polarity Protection Present Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Fiber Storage Temperature -40°C to 85°C Warranty 5 Years Wavelength Depends on fixed fiber modules Weight Unit: 0.595 lb. Shipping: 0.86 lb.
Ambient Relative Humidity 5% to 95%, (non-condensing) Certifications FCC, CE Dimensions 26 x 95 x 75 mm (W x H x D) EMI FCC Part 15 Subpart B Class A, CE EN 55032 Class A, EN 61000-6-4 Class A EMS CE EN 55024 Class A EN 61000-6-2 Class A IEC61000-4-2 (ESD) IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 (Magnetic Field) Ethernet Port 1*RJ45 Port w/10/100/1000T(X), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Port 1*1000 SC/ST type connector Multi-mode: 50/125um or 62.5/125um Single-mode: 9/125um or 10/125um Flow Control IEEE 802.3x back pressure flow control Free Fall / Shock / Vibration IEC60068-2-32 / IEC60068-2-27 / IEC60068-2-6 Green RoHS Compliant Housing Metal, IP30 protection Input Voltage 12 to 48VDC, Redundant Input Jumbo Frame 10K bytes LED Indicators Power (PWR): On / Off Fiber Port (GFX): Link / Act Ethernet Port: Link / Act MAC Table Size 8K Memory Buffer 1Mbit Mounting DIN-Rail, Wall Mounting (optional) Operating Temperature -10°C to 70°C Overload Current Protection Present Power Connection 1 removable 4-contact terminal block Power Consumption 2.2 Watts for system Processing Type Store and Forward Protocols CSMA/CD Reverse Polarity Protection Present Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Fiber Storage Temperature -40°C to 85°C Warranty 5 Years Wavelength Depends on fixed fiber modules Weight Unit: 0.595 lb. Shipping: 0.86 lb.
