To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment. The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge voltages caused by lightning strikes. Outdoor Installation of Ethernet Lightning Arrest Box When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.
4 x Gigabit PoE+ ports 1 x Gigabit port 120W PoE power budget 10Gbps switching capacity Supports jumbo frames up to 9KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
Environmentally Hardened Design PLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-5225-8P2T2S, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-5225-8P2T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-5225-8P2T2S can be placed in almost any difficult environment. The IGS-5225-8P2T2S also allows either DIN rail or wall mounting for efficient use of cabinet space. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-8P2T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-5225-8P2T2S provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat5E/6 Ethernet cable. As the whole system comes with a total 240-watt PoE budget, the IGS-5225-8P2T2S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras and other PoE network devices, doubling that of the current conventional 802.3af PoE. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-8P2T2S’ GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI. Intelligent Alive Check for Powered Device The IGS-5225-8P2T2S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-8P2T2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-5225-8P2T2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-5225-8P2T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-5225-8P2T2S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Digital Input and Digital Output for External Alarm The IGS-5225-8P2T2S supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-8P2T2S port shows link down, link up or power failure. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-8P2T2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-8P2T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-8P2T2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-8P2T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-8P2T2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-8P2T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-8P2T2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225-8P2T2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-8P2T2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-8P2T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-8P2T2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Industrial Area Department/Workgroup PoE Switch Providing up to 8 PoE+, in-line power interfaces, the IGS-5225-8P2T2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-8P2T2S makes the installation of IP cameras or wireless AP easier and more efficient.
LTU-LRThe LTU LR is a Point-to-MultiPoint (PtMP) 5 GHz Radio with an integrated antenna designed for use as a PtMP CPE. LTU technology that breaks through the limitations of 802.11 Wi-Fi technology and supports 1024QAM for high performance and flexible bandwidth (10/20/30/40/50 MHz).
Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja on allapoole ühilduv Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x mini DisplayPort isane > 1 x DisplayPort isane - Sisend = mini DisplayPort; väljund = DisplayPort - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 32 AWG - Kaabli läbimõõt: umbes 5,5 mm - Vaskjuht - Varjestus - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: must - Pikkus koos pistikutega: ca 2 m Süsteeminõuded - Üks vaba mini DisplayPort-liitmik Pakendi sisu - Mini DisplayPort kaabel
HUAWEI WiFi AX2 5 GHz Wi-Fi 6 | HarmonyOS Mesh+ | Vanemlik kontroll 5 GHz Wi-Fi 6 tugi Traadita edastuskiirusega kuni 1500 Mbps ja 5 GHz sagedusalaga, mis toetab Wi-Fi 6 maksimaalse edastuskiirusega kuni 1201 Mbps1, pole mängimine, voogesitus ja allalaadimine kunagi olnud nii sujuv ja kiire. Loob automaatselt ühenduse optimaalse Wi-Fi võrguga2 HUAWEI WiFi AX2 on varustatud 5 GHz ja 2,4 GHz sagedusaladega, mis töötavad samaaegselt ning vahetavad seadmeid automaatselt 5 GHz ja 2,4 GHz sagedusalade vahel, et tagada kogu aeg nende optimaalne ühendus. 5 GHz on ideaalne kiireks mängimiseks ja voogedastuseks, samas kui 2,4 GHz pakub laiemat leviala. Kõrge isolatsiooniga antenni disain kiiremate ühenduste jaoks Suure jõudlusega antennimassiiv töötati hoolikalt välja, et vähendada samal sagedusel häireid võimalikult suurel määral. Lai Wi-Fi leviala HarmonyOS Mesh+ abil Mitu ruuterit saab rühmitada ühe WiFi-nime alla, kui ühendate oma HUAWEI WiFi AX2 teiste HUAWEI ruuteritega3 oma kodus. See tähendab, et saate alati nautida optimaalset ühendust, olenemata sellest, millises ruumis viibite. Gigabit WAN/LAN Auto-Adaptation HUAWEI WiFi AX2-l on kolm Gigabit Etherneti porti, millest igaüks toetab WAN/LAN-i4, säästes teid nende vahel eristamise vajadusest ja muutes lairibaühenduse installimise imelihtsaks. Põhjalik vanemlik kontroll Tänu vanemlikule kontrollile võite olla kindel, et teie laste turvalisus on veebis tagatud. Mõne telefoni puudutusega saate blokeerida juurdepääsu sobimatutele veebisaitidele ja piirata juurdepääsu valitud seadmetele. Hallake nutikalt oma kodu WiFi-ühendust AX2-ga saate vaadata oma kodu Wi-Fi leviala kaarti, jälgida võrgu olekut ja hõlpsasti lahendada võrguprobleeme, järgides soovitatud näpunäiteid. Signaali leviala Kuvab täpselt teie koduse Wi-Fi leviala kaardi. Nutikas diagnoos Jälgige oma kodus iga ühendatud seadme võrgu olekut. Saage selge arusaam kogu oma koduvõrgust. Optimeerige oma võrku Tuvastab ühenduse probleemid ja annab professionaalset nõu koduvõrgu optimeerimiseks. HUAWEI AI Life rakendus Võrguhaldus Interneti juurdepääsu režiimide ja Wi-Fi seadete haldamine. Külaliste WiFi Avage oma külaliste jaoks eraldi võrk, et saaksite oma WiFi-parooli turvaliselt hoida. Seadmehaldus Hallake, kui kaua teie pere võib võrgus aega veeta, ja oma veebitegevusi. Esitatud andmed on teoreetiline maksimaalne kiirus (300 Mbps @ 2,4 GHz + 1201 Mbps @ 5 GHz). Tegelikud kiirused võivad olenevalt kasutustingimustest ja ühendatud seadmetest erineda. Seda funktsiooni toetavad ainult seadmed, mis toetavad protokolli 802.11v. Seda funktsiooni toetavad ainult HUAWEI ruuterid, mis toetavad HarmonyOS Mesh+. Kui ühte Gigabit Etherneti portidest kasutatakse WAN-i jaoks, saab teisi kasutada ainult LAN-i jaoks.
TSW200 switch TSW200 is an industrial unmanaged switch from Teltonika Networks. It is equipped with 2 SFP ports for long-range fiber optic communication and 8 Gigabit Ethernet ports that support IEEE802.3af and IEE802.3at Power-over-Ethernet standards. Classified as Power Supply Equipment (PSE), it centralizes power, providing up to 30 watts per port. It has 10/100/1000 Mbps Ethernet ports, providing a cost-effective, high-bandwidth solution for industrial Ethernet. This rugged industrial switch is ideal for high-bandwidth professional applications where you need to provide both a reliable data connection and power.
IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts) 8 x Gigabit Auto-MDIX PoE / PoE+ ports Provides up to 30 watts for PoE+ Provides up to 15.4 watts for PoE Automatically detects the PoE class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps) Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception and transmission Store-and-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports and when a connected device is in standby mode Jumbo Frame support up to 9K Plug and Play Sturdy metal case 3-year limited warranty
The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°. With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s.
