The CS22D 2-Port USB DVI KVM Switch is a control unit that allows access to two computers from a single USB and DVI console (keyboard, video and mouse). With the CS22D, you can access the computers conveniently via a Remote Port Selector.- One DVI-D video console controls two DVI-D USB interface computers.- Computer Selection via Remote Port Selector.- OS Support: Windows 2000, Windows XP, Windows Vista, 7, Mac, Sun and Linux.- Superior video quality- up to 1920 x 1200@60Hz.- Supports USB hot-plugging.- Non-powered.- Supports USB 2.0 device.DesignNumber of Hosts 2Supported Maximum Resolution 1920 x 1200 Resolution (pixels)Device Switchoveron the DeviceLEDPort 2Terminal-Device ConnectionsUSB 2DVI-I 1Connections per ComputerUSB 1DVI-D 1Product dimensions 100 x 30 x 94 mmWeight 330 grams
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 UTP (unshielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: must
CRS328-4C-20S-4S+RM The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. ARJ45 console port is available for management and debugging, and a mode button can be customised toexecute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STP / RSTP / MSTP• Access Control List• MikroTik neighbor discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• IEEE 802.3ad and static link aggregation Switching resultsCRS328-4C-20S-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-4C-20S-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
TRM250TRM250 is an Industrial Cellular modem with multiple LPWAN connectivity options. It features NB-IoT, LTE Cat-M1 and is backwards compatible with EGPRS (2G). It offers an extremely long lifecycle and is the most flexible option when upgrading the connectivity of existing industrial equipment. TRM250 is equipped with a USB interface, a rugged aluminium housing and is designed for large scale IIoT deployments. The Industrial Cellular Modem TRM250 is a rugged, compact and extremely versatile connectivity device is able to provide cellular capabilities to equipment across IoT and Industrial IoT applications. This futureproof product features both NB-IoT and LTE Cat-M1 LPWAN communication options and is backwards compatible with 2G. This means that you can upgrade your existing infrastructure with a cost-efficient and reliable connectivity device which will adapt to the changing telecommunications environment and will enable you to use the best cellular M2M technologies for many years to come. Easy to deploy, easy to use and even easier to maintain, TRM250 comes with a USB interface for power & communication, drivers supporting all relevant platforms and one SMA connector for an external antenna to obtain better signal coverage.
Archer C54 AC1200 Dual-Band Wi-Fi Router Faster AC Wi-Fi—AC1200 dual-band is ideal for 4K video streaming and high-speed downloading. Far-Reaching Coverage—4× antennas and Beamforming delivers extensive Wi-Fi coverage and reliable connections. Multi-Mode 3-in-1—Supports Router, Access Point, and Range Extender modes for added flexibility. Parental Controls—Manages when and how connected devices can access the internet. Guest Network—Provides separate access for guests in order to secure the host network. Smooth HD Streaming—Supports IGMP Proxy/Snooping, Bridge, and Tag VLAN to optimize IPTV streaming. IPv6 Supported—Compatible with the IPv6 (the latest Internet Protocol version 6). Compact and Mountable—Designed to conserve space and complement any décor.
Xiaomi Router AC1200 EU 802.11ac, 300 + 867 Mbit/s, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support No, MU-MiMO Yes, No mobile broadband, Antenna type 4 External Antennas
10xSFP28 | 1xConsole | 1x10/100M | Included Accessories IEC cord, IEC cord, K-54 kit, Rack ears for CRS510 | Dimensions 320 x 185 x 44 mm | Unit Net Weight 2 kg
60 GHz solutions offer fiber-like speed and stability - while saving you plenty of time and money on installation and maintenance. The latest Cube 60Pro series is taking the advantages of 60 GHz networking to the next level – with the 802.11ay standard for even higher distances stability speed and convenience.
Delocki audiomuundur teisendab digitaalse audiosignaali analoogseks stereosignaaliks. Näiteks DVD- või Blu-ray-mängija saab ühendada seadme sisendisse ja signaali saab edastada optilise TOSLINK või S/PDIF koaksiaalühenduse kaudu. Väljundipordis edastatakse audiosignaal RCA-liidese kaudu. Spetsifikatsioon - Ühendused: Sisend: S/PDIF: 1 x TOSLINK emane S/PDIF 1 x koaksiaalühendus S/PDIF (emane): 1 x koaksiaalühendus S/PDIF 1 x USB Type Micro-B female (5 V toide): 1 x USB Type Micro-B female (5 V toide) Väljund: 2 x RCA female - Kiibistik: MS8416 - Toetatud proovivõtusagedused: 32 / 44.1 / 48 / 96 / 192 kHz - Bitikiirus 16 - 24 bitti - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 63 x 44 x 23 mm Süsteeminõuded - Digitaalne helisignaal - Toiteallikas, millel on vaba USB Type-A emasport Pakendi sisu - muundur digitaalne > analoog - USB Type-A ja Micro-B tüüpi kaabel, pikkus ca. 30 cm - Kasutusjuhend
Description This high-quality heat shrink tube set by Delock is used to protect and to insulate cables, electrical tubes or wires. Under the effect of heat, the sleeve completely encloses the cable and shrinks. This protects the cable from the effects of the influence of weather and mechanical damage. Choice of different sizes and shrink rates This set contains hoses with four different diameters, two different lengths, two different colors and two different shrink rates that can be used in many different ways. Practical storage box The handy box is ideal for protecting the shrink tubes, keeping it free of dirt and dust. The box can also be reused to store various tool accessories, such as screws, nuts, etc. Multifunctional application The heat shrink tubes can be used e.g. in a workshop, at home or in the industry. Application of shrink tubes The heat shrink tube can be heated with a hot air gun, the hose shrinks to half its original diameter when heated at a 2:1 shrinkage ratio and to a quarter of its original diameter at a 4:1 shrinkage ratio. Specification • Content: Shrinkage ratio 2:1: 100 x diameter 3.0 mm red, length: ca. 50 mm 100 x diameter 3.0 mm black, length: ca. 50 mm 50 x diameter 6.0 mm red, length: ca. 50 mm 50 x diameter 6.0 mm black, length: ca. 50 mm 60 x diameter 13.0 mm red, length: ca. 50 mm 60 x diameter 13.0 mm black, length: ca. 50 mm 30 x diameter 25.0 mm red, length: ca. 50 mm 30 x diameter 25.0 mm black, length: ca. 50 mm Shrinkage ratio 4:1: 20 x diameter 25.0 mm red, length: ca. 100 mm 20 x diameter 25.0 mm black, length: ca. 100 mm • Shrinking temperature: 70 °C ~ 125 °C • Material: polyethylene • Box dimensions (LxWxH): ca. 300 x 200 x 63 mm Package content • Heat shrink tube box Package • Box
In addition to four 10G SFP+ uplink, it comes with two additional 10G Multi-Gigabit (1G/2.5G/5G/10G) RJ-45 ports for more flexible connectivity. PoE models XGS2220-54FP provide additional power over Ethernet capability. This Series is built with smart fan designed to automatically adjust speeds based on the device temperature, offering near silence while the Switch is in operation.
