This table microphone by Delock is suitable for use in conferences. Optimal recordings The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. Touch mute button & status LED The touch mute button quickly mutes the microphone. The LED is red when muted and green when recording. Headphone output The microphone has a 3.5 mm stereo jack output for connecting headphones or speakers. Plug & Play Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux. Specification • Connectors: 1 x USB 2.0 Type-A male 1 x 3.5 mm 3 pin stereo jack female • Directivity: omnidirectional • Sensitivity: -16 dB +/- 3 dB • Frequency range: 100 Hz - 10 kHz • Sample rate: 16 Bit / 44.1 kHz • Signal-to-noise ratio (SNR): ca. 65 dB • Mute-Button • Status LED • Cable length: ca. 1.5 m • Colour: black • Dimensions (Ø x H): ca. 75 x 19 mm • USB bus powered • Plug & Play System requirements • Chrome OS • Linux Kernel 4.4 or above • Mac OS 10.9 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB microphone • User manual
Omada | Type Wireless Access Point | Data transmission speed 3000 Mbps | IEEE 802.11a/b/g | IEEE 802.11n | IEEE 802.11ac | IEEE 802.11ax | 1x10/100/1000M | Wireless Frequency Range 2.4 GHz and 5 GHz | Included Accessories EAP653 UR Ceiling/Wall Mounting Kit Installation GuideNote: DC adapter is not included in the package, and is sold separately. | Power supply requirements 12V DC / 1.5 A (Power Adapter IS NOT included) ; 48V Passive PoE | Colour White | Dimensions 160 160 33.6 mm
AX3000 Whole Home Mesh WiFi 6 System with PoE - AX3000 Dual-Band WiFi – 2402 Mbps (5 GHz) + 574 Mbps (2.4 GHz). - Multiple Installation Options – Place it on a tabletop or install it on a ceiling or wall with the adaptive accessories. - PoE Supported – Power over Ethernet for simplified network deployment. - Multi-Gig 2.5 Gbps Wired Network – 1× 2.5 Gbps port + 1× Gigabit Port. - Seamless AI-Driven Mesh – Intelligently learns your network environment to provide the ideal WiFi unique to your home. - TP-Link HomeShield – Provides comprehensive network protection, robust parental controls, and real-time IoT security. - Universal Compatibility – Backward compatible with all WiFi generations and works with any internet service provider (ISP) and modem. - Setup Made Easier Than Ever – The Deco app walks you through setup step-by-step.
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds. - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Manage the whole network locally or from the cloud via web UI or Omada app. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. - PoE+ Powered: Supports both Power over Ethernet (802.3at) and DC power supply for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP610
TX201 PCI-E 1x2.5Gb network card Amazing speed - 2.5 Gigabit Ethernet enables access to your multi-gigabit network. The TX201 is up to any task, whether it's local data transfer or internet access. Compatibility with lower standards - The high speeds and ultra-low latency of the 2.5GBase-T standard do not preclude support for devices that use less advanced technologies such as Fast Ethernet or Gigabit Ethernet. The network card automatically negotiates connection speeds. Low-Profile and Full-Height Herring - In addition to the standard herring, a low-profile herring is included with the product for mini tower PCs. Multi-operating system support - Compatibility with Windows 11/10/8.1/8/7, Windows Server 2022/2019/2016/2012/2008 R2 and Linux means the card can be used on a wide variety of devices. Incredible 2.5G network connectivity 2.5 Gigabit Ethernet achieves an incredible data transfer rate of up to 2.5 billion bits per second 2.5× more than the Gigabit Ethernet standard. The TX201 card is ready for any task, such as bandwidth-hungry local data transfer or Internet access. Home data storage available in seconds For local connections, the PCIe 2.5G network card helps build an instant transport channel between the central server and other equipment on the local network. Performing bandwidth-intensive activities at home or in the office won't be difficult, so the network can easily handle local data transmission as well. Extremely fast response Along with 2.5 Gigabit internet access, your gaming experience will become fully optimised with a huge increase in speed, lower latency and better responsiveness. Downloading games, smooth live streaming, huge backups via the cloud are simple and fast, as is character selection. Performance versatility proven by multi-standard compatibility 2.5GBase-T technology is compatible with standards that provide speeds of both 2.5Gb/s, 1Gb/s, 100Mb/s and 10Mb/s Base-T standards. The 2.5G Ethernet port automatically negotiates connection speeds, so you can easily connect to a 2.5G network when it is available. QoS support Quality of Service technology will make sure your bandwidth is always sufficient and lag-free. Stream content, play online games and enjoy smooth internet browsing.
Cube 60Pro ac A powerful point-to-point 60 GHz 802.11ay CPE for bridging distances up to 2.4 km. Long gone are the days when you had to rely on cables for speed and stability. 60 GHz solutions offer fiber-like speed and stability - while saving you plenty of time and money on installation and maintenance. Our latest Cube 60Pro product line is taking the advantages of 60 GHz networking to the next level – with the 802.11ay standard for even higher distances, stability, speed, and convenience. The Cube 60Pro ac CPE allows you to establish ultra-fast point-to-point connections over distances as far as 1 km. And that’s not all – we have added Channel 5* support, so you can reach even higher distances if necessary. In our tests, the Cube 60Pro ac easily maintained a reliable connection over 2.4 km. Bridging two locations has never been easier! You can get a preconfigured kit of two Cube 60Pro ac devices: the Wireless Wire Cube Pro. Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play! Forget about downtime with the automatic 5 GHz backup connection The 60 GHz frequency is unaffected by the crowded wireless spectrum, it offers high speed and capacity. But it can sometimes struggle during bad weather conditions. That’s why both Cube 60Pro devices feature an automatic 5 GHz failover. We have added a powerful directional antenna so that the 5 GHz range can keep up with the 60 GHz.
TRB160 on ülimalt väike, kerge ja energiatõhus IoT-värav, mis on varustatud kriitilise tähtsusega LTE Cat 6, Gigabit Ethernet ja USB Type-C kaudu virtuaalse võrguliidesega, mis võimaldab samaaegselt toite ja võrguandmeid edastada. See IoT-värav suudab saavutada kuni 300 Mbit/s mobiilside kiiruse koos operaatoragregeerimisega paljudes rakendustes ja toetab mitmesuguseid tööstusklassi protokolle M2M-side jaoks.LTE CAT 6Kuni 300 Mbit/s mobiilikiirus koos operaatoragregeerimisegaUSB TYPE-CSamaaegseks toiteallikaks ja võrguandmete edastamiseksPROTOKOLLIDOPC UA, Modbus, Data to Server, MQTT, DNP3, DLMS ja muud.KOMPAKTSUSVäike suurus, lihtne paigaldus
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
The Ubiquiti UniFi Switch Pro Max 16 PoE stands out as a formidable solution for businesses seeking to enhance their network infrastructure. This switch not only offers robust performance with its impressive 42 Gbps non-blocking switching throughput, 84 Gbps switching capacity, and 62.496 Mpps forwarding rate, but it also provides advanced connectivity options through its array of ports, including 12 10/100/1000 Base-T, 4 2.5GBase-T, and 2 10GBase-T SFP+ ports.Designed to cater to the needs of modern businesses, it features a comprehensive PoE support with a 180 W budget, accommodating a variety of devices from access points to surveillance cameras, thereby streamlining installation processes and reducing cable clutter. Moreover, its Layer 3 advanced switching capabilities, coupled with extensive security and network management features like VLAN support, DHCP snooping, and IGMP snooping, ensure a secure, efficient, and scalable network environment.Built to last, the switch's steel housing and ability to operate in temperatures ranging from -5°C to 40°C make it a reliable choice for any setting. Whether for a small office or a large enterprise, the Ubiquiti UniFi Switch Pro Max 16 PoE is engineered to meet the demands of any network infrastructure, offering both performance and durability.
TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ - 9× gigabit RJ45 ports and 1× combo gigabit SFP/RJ45 port - Equipped with eight 802.3af/at PoE+ ports with up to 30 W for each port, the switch can transfer data and power via one single cable - Supports PoE power up to 123 W for all PoE ports* - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise
Dual-band Wi-Fi 6 with speeds up to 1500 Mb/s - 1201 Mb/s in the 5 GHz band and 300 Mb/s in the 2.4 GHz band. Seamless roaming on one unified network - Halo units work together to automatically switch between Halo systems as you move around your home using one unified Wi-Fi name and password. Connect 100+ Devices - Provide fast and stable connections for 100+ devices. Easy home network management - use the app to quickly set up and manage your Wi-Fi network. You can also manage your children's time and online content. Full Gigabit Ports - Gigabit ports for lightning-fast wired connections.
Introducing the NETGEAR GS308EPP PoE+ Gigabit Ethernet Plus Switch with 8 ports PoE+ and a total PoE budget of 124W to power PoE applications such as VoIP phones, IP cameras for surveillance, wireless access points and more.GS308EP includes basic and advanced network management features to help optimize the performance of business networks. Management is also flexible via the easy-to-use web browser-based management GUI. Basic management features include VLANs, QoS, and IGMP Snooping, and advanced management features include advanced per port PoE control and uninterrupted PoE.Use VLANs to separate traffic for better speed and improved bandwidth, QoS to prioritize traffic for better delivery quality and IGMP snooping for optimized multicast performance at Layer 2 which is especially useful for bandwidth-intensive IP multicast applications such as IPTV. Advanced per port PoE controls manage the power of the PoE connected devices by enabling and disabling PoE power per port, PoE prioritization, PoE power limit per port and more. Lastly, unique to NETGEAR, it has uninterrupted PoE. Keep PoE power on even when the switch is updating firmware or performing a software reboot.
GS105D 5-Port Gigabit Desktop Switch 5 10/100/1000Mbps RJ45 ports, Auto-Negotiation, Auto-MDI/MDIX Standard IEEE 802.3, IEEE 802.3u, IEEE802.3x, IEEE 802.3ab Supports automatic learning and renewal of MAC addresses Cuda green technology saves energy up to 85%
TP-LINK Gigabit Smart Switch TL-SG2008 is equipped with 8 gigabit RJ45 ports. The switch provides high performance, enterprise-level QoS, useful security strategies and rich layer 2 management features. TP-LINK’s 8-Port Gigabit Smart Switch TL-SG2008 is especially designed for the small and medium business networks that require efficient network management. TL-SG2008 comes with a comprehensive set of features, such as Link Aggregation Group, 802.1Q VLAN, Access Control Lists (ACL), Quality of Service(QoS L2 to L4), Storm Control and IGMP Snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. What’s more, its easy-to-use web management interface means faster setup and configuration with less downtime, providing the ideal solution for your business network.
The UniFi Access Reader Lite has been designed for convenient use and secure access. The PoE-powered reader is easy to install and supports the latest NFC security standards, including AES-128 encrypted MIFARE DESFire. Unlocking the door is quick and secure with an NFC card or with mobile app.
The Zyxel GS-105B is designed to meet the networking needs of small to medium-sized enterprises with its robust performance and reliability. This 5-port Gigabit Ethernet switch delivers a switching capacity of 10 Gbps and a forwarding rate of 7.4 Mpps, ensuring efficient data transfer across the network. Its compact form factor is suitable for desktop use or wall mounting, making it a flexible choice for various environments. Operating within a temperature range of 0°C to 40°C and featuring a high packet buffer size of 128 KB, this switch is built to handle demanding network conditions. The device complies with multiple standards, including IEEE 802.3 and FCC, which ensures compatibility and performance in different network settings. With additional features such as Quality of Service (QoS) and auto-uplink capability, the GS-105B is an effective solution for enhancing network performance.
Zyxel GS-108B v5 ? 8-Port Gigabit Switch 8-port Gigabit switch with plug & play deployment QoS ports ensure stable traffic prioritization Fanless design for silent operation Durable metal housing with wall-mount option Energy-saving operation with IEEE 802.3az support Fast and easy networking for small businesses The Zyxel GS-108B v5 is an 8-port unmanaged Gigabit switch that seamlessly connects workstations, IP phones, storage, and other network devices. With plug & play functionality, it requires no configuration?just connect your devices and enjoy instant networking. QoS ports for prioritized and smooth data flow Four QoS ports (ports 5?8) on the GS-108B v5 are designed to handle critical traffic. Ports 5 and 6 offer medium priority, while ports 7 and 8 provide high-priority performance for demanding applications such as voice over IP. Silent and reliable build The passively cooled, fanless design ensures completely silent operation, making it perfect for noise-sensitive environments. Its sturdy metal housing improves heat dissipation and durability. The switch supports both desktop and wall-mounted installation. Smart energy efficiency built in Supporting IEEE 802.3az Energy Efficient Ethernet, the GS-108B v5 adjusts power consumption based on traffic levels. This enables significant energy savings without compromising network performance. 8 x 10/100/1000 Mbps RJ-45 ports QoS ports: 2 x medium (ports 5?6), 2 x high (ports 7?8) Switching capacity: 16 Gbps Forwarding rate: 11.5 Mpps MAC address table: 4K Packet buffer: 192 KB Jumbo frame support: up to 9 KB Fanless, passively cooled design Power consumption: max. 4.82 W Metal housing, desktop or wall-mountable Compliant with IEEE 802.3az Energy Efficient Ethernet Dimensions: 126 x 51.8 x 24 mm Weight: 0.176 kg
HDMI 2.0 active optical cable HDMI optical cables allow for lossless transmission of audio/video signals over vast distances. Thanks to the use of optical fibres as conductors, they are extremely thin, which facilitates cable routing and additionally provides resistance to electromagnetic interference. The latest HDMI 2.0 standard (Premium High Speed) allows the transmission of 4K quality video at a refresh rate of 60 Hz.
Die PoE-Injektoren von Zyxel erfüllen die steigende Nachfrage nach Verbindungen zu Hochgeschwindigkeits-Netzwerkgeräten wie WiFi 7 und WiFi 6 APs, Überwachungs-PTZ-Kameras und modernen POS-Terminals. Der PoE12-90W unterstützt Netzwerkgeschwindigkeiten von bis zu 10Gbps. Der PoE12-90W entspricht dem IEEE 802.3bt PoE++-Standard und bietet PoE-Leistungsbudgets von bis zu 90 Watt. Er gewährleistet Interoperabilität und Kompatibilität mit anderen standardbasierten PoE-fähigen Geräten. Netzwerkgeräte lassen sich ganz einfach und ohne jegliche Konfiguration anschließen. Die Designs für die Wandmontage und für den Schreibtisch eignen sich für die meisten Installationsmöglichkeiten. Der PoE12-90W verfügt über einen Überlast- und Kurzschlussschutz, der die Stromzufuhr im Notfall sofort unterbricht, so dass die Geräte nicht beschädigt werden.
The MikroTik LHG XL 5 AX is designed for outdoor use, blending high performance and rugged features to cater to demanding networking needs. Equipped with a powerful 27 dBi internal antenna, this wireless bridge ensures a maximum range of 20 km in open space, ideal for extending connectivity across vast distances. The device supports advanced wireless protocols including IEEE 802.11ax (Wi-Fi 6), ensuring reliability and speed for various applications. Operating in extreme temperatures ranging from -40°C to 70°C, the MikroTik LHG XL 5 AX is built to endure harsh environments. With an installed RAM of 256 MB and flash memory of 128 MB, it offers robust processing capabilities driven by an 800 MHz ARM processor. Additionally, the secure WPA3 encryption algorithm enhances network security, making it suitable for both home and professional use.
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
