LTU-ROCKET Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP) BaseStation radio in LTU™ product family. Operating in the 5 GHz frequency band, the LTU Rocket is a spectrally efficient, noise-resilient PtMP AP specifically designed for wireless ISPs (WISPs).Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades. Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.Primary features of the LTU Rocket include:• 600+ Mbps PtMP performance(1)• Up to 64 client connections per AP(2)• 2+ Million pps• Proprietary RF filtering (1) 1+ Gbps with future firmware upgrade. (2) 255 client connections with future firmware upgrade. Superior PerformanceLTU is a new, proprietary technology with custom silicon and radio design that break through the limitations of 802.11 Wi-Fi technology. This enables LTU to deliver far superior performance over previous airMAX products that are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the ground floor up. Its core communications processing engine enables low latency, long-range capability, DFS flexibility, higher constellations, better power output, and improved receive sensitivity.Seamless CompatibilityThe LTU Rocket is designed to be paired with a variety of Ubiquiti antennas to suit the needs of each installation. The radio includes a mounting bracket that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU Rocket radios with the airPrism® 5 GHz 3x30° HD Sector Antenna for co-location deployments.The LTU Rocket also works with any CPE device in the LTU family, such as the LTU-Pro.
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
EXTREMECLOUD IQ : INDOOR WIFI 6 AP, 2X2 RADIOS WITH DUAL 5GHZ AND 1X1GE PORT. INTEGRATED LIGHT/POWER SENSORS & BLE/ZIGBEE. AI/ML GREEN MODE. EXTERNAL ANTENNA SUPPORT. ANTENNAS SOLD SEPARATELY. INCLUDES CONNECT. DOMAIN : REST OF WORLD
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, beleuchteter Fußschalter mit 1,5 m langer Steuerleitung, 2x permanente Steckdosen, 4x schaltbare Steckdosen, Stecksystem DE (Stecker-Typ F)
Schutzkontakt-Steckdosenleiste, mit acht Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 13.500 A, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Funktionskontrollleuchte, diverse Montageoptionen, Stecksystem DE (Stecker-Typ F)
Der Cisco Compatible SFP-10G-LR SFP+/LR SFP-Transceiver ist ein Erweiterungsmodul für Cisco Switches. Der Cisco Compatible SFP-10G-LR SFP+/LR unterstützt den 10 Gigabit-Standard auf einer Reichweite von bis zu 10 Kilometer und kann dank Hot-Swap-Fähigkeit während des Betriebes ein- und ausgebaut werden.
1 x 100/1000BASE-T PoE sisendport 1 x 100/1000BASE-SX/LX SFP-pesa PoE toiteallikaga - toiteadapterit ei ole vaja SFP-pesa mahutab multimoodseid või ühemoodseid mooduleid Toetab Link Fault Pass-Through (LFPT) Jumbo Frame (9KB) toetus TRENDneti Gigabit PoE PD SFP Fiber Media Converter, mudel TFC-PGSFP, teisendab 100/1000BASE-T vask-Etherneti 1000BASE-SX/LX Fiber SFP meediumiks ja vastupidi. TFC-PGSFP saab mugavalt toite PoE-lülitist või injektorist, toiteadapterit ei ole vaja. Sellel on üks gigabitine PoE-sisendport toite- ja andmeside jaoks ning üks SFP-pesa, mis toetab nii multimoodilisi (SX) kui ka ühemoodilisi (LX) SFP-mooduleid. SFP-pesa mahutab nii Fast Ethernet kui ka Gigabit SFP-mooduleid, mis tagab täiendava paigaldamise paindlikkuse. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid multimood- või ühemood-kiudoptiliste rakenduste jaoks. PoE toiteallikaga Ei ole vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 jalga) kaugusele. Kompaktne Väike ja kompaktne metallkorpuse disain tagab suurema paigaldamise paindlikkuse. Pordid 1 x 100/1000BASE-T RJ-45 PoE sisendport, 1 x 100/1000BASE-SX/LX SFP-pesa. PoE toiteallikaga Ei vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 ft.) kaugusele. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid Jumbo Frame Saadab suuremaid pakette ehk jumbokaadreid (kuni 9 KB), et suurendada jõudlust.
Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
Features: High quality imaging with 4 MP resolution Clear imaging against strong backlight due to 120 dB true WDR technology Efficient H.265+ compression technology Water and dust resistant (IP66) and vandal proof (IK10) Built-in microphone for real-time audio security Focus on human and vehicle targets classification based on deep learning
MT48-570080-11DG is 57 V 0.8 A power supply. It's part of our GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-570080-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure in the link below.
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
Der DMG-31 von PowerOn verbindet Desktops mit einem High-Speed WLAN-Netzwerk. Er ist kompatibel mit den 802.11a/b/g/n (WiFi 4) Standards und erreicht Geschwindigkeiten von bis zu 300 Mbit/s bei 2,4GHz über einen freien PCIe x1 Port. Die zwei leistungsstarken 3dBi Antennen sorgen nicht nur für einen ordentlichen Datendurchsatz, sondern gewährleisten auch eine unterbrechungsfreie Datenübertragen auf größere Distanzen.
• 920 watts power supply unit • Improved failover of selected LANCOM access switches • Hot-swappable – can be applied during operation • 820 watts PoE power supply and 1,440 watts PoE power supply when used as a second PSU in boost mode • 720 watts PoE power supply for the LANCOM GS-4530XP (limited by the number of ports) • Input voltage: 110 VAC and 230 VAC • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C
Delock PCI Expressi kaart laiendab teie arvutit kahe välise USB 3.0 pordiga. Saate ühendada USB 3.0 seadmeid nagu nt. dokkimisjaamad, kaardilugejad, välised kõvakettad, hubid jne.
See Delocki kaabel võimaldab ühendada DVI-liidesega seadmeid, nt monitori, DisplayPort-liidesega. Spetsifikatsioon Liitmikud: 1 x DisplayPort isane > 1 x DVI 24+1 isane koos kruvidega Kiibistik: PS8402A DVI-D (Dual Link), VGA juhtmeta DisplayPort 1.2a spetsifikatsioon Passiivne kaabel (level shifter), sobib ainult DP++ väljundiga graafikakaartidele Signaali suund: DisplayPort sisend > DVI väljund Kaabli gabariit: 30 AWG Kaabli läbimõõt: umbes 6 mm Twisted-pair kaabel Vaskjuht Kontaktid kullatud Kolmekordselt varjestatud kaabel Andmeedastuskiirus kuni 10,2 Gb/s Resolutsioon kuni 3840 x 2160 @ 30 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) Värv: must Pikkus ilma pistikuteta: ca 2 m Süsteeminõuded Vaba DisplayPort DP++ emissioon Pakendi sisu DisplayPort-DVI kaabel
Delocki PCI Expressi kaart laiendab arvutit nelja välise USB 3.2 Gen 1 pordiga. Ühendada saab erinevaid USB-seadmeid nagu dokkimisjaamad, kaardilugeja, väline korpus jne. Tänu USB-portide vertikaalsuunale on võimalik paigaldada madala profiiliga pessa.
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
The ultra-small USB adapter comes with Bluetooh 5.0 technology which allows fast pairing and stable and energy-saving connectivity. Turn non-Bluetooth PCs or laptops into Bluetooth-capable devices; making it possible to connect with Bluetooth headphones, speakers, keyboards, mice, etc. You can use the USB-C and USB-A port as you like and thanks to the mini size the BT0054 by LogiLink is also easily portable and perfect for on the go.
The integrated Intel® 82599 chipset delivers excellent performance and ensures fast data throughput. In addition, the ST-7211 further reduces the load on the main processor, so network transfers place less demand on the CPU, which is often the case when using standard network cards in a server environment. The connection is made via the fast SFP+ standard.
Paigaldusstandard: 35mm DIN rööbas Materjal: Madala süsinikusisaldusega teras Kaal: 57g Komplektis olevad kruvid Philipsi paanipea kruvi #6-32×3/16, 2tk Mõõtmed 82 mm x 46 mm x 20 mm
