Ubiquiti POE-24-7W is a PoE adapter designed to power various Ubiquiti devices.Compatible with most products (check the device specification before determining compatibility):airFiberairMAXEdgeMAXmFiUniFi APUniFi Video / airVision.Protection Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protectionClamping protectionMaximum surge dischargePeak pulse currentAC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable™, and TOUGHCable Connectors. Ubiquiti PoE Adapter Compatibility with the airGateway™ Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber’s local network to the WISP network. The airGateway is available in three models: airGateway Standard model with an internal antennaairGateway Pro Dual-Band Wi-Fi model with an internal antennaairGateway-LR Long-range Wi-Fi model with an external antenna for extended range The airGateway plugs into any of these PoE Adapters: Model Number CompatibilityPOE-15-12W ✓POE-24-12W ✓POE-24-12W-G ✓*POE-24-7W ✓*POE-24-12W-G-WH ✓* * airGateway maximum LAN port speed: 100 Mbps
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: must
LogiLink's outdoor patch cords are specifically designed for use in unprotected, harsh environments, but not for underground applications. The cable sheath made of resistant polyurethane (PE) protects against weathering and UV radiation. The cables are still flexible and easy to lay.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 2 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Universal 2in1 crimping tool and cable testerThis professional crimping & testing tool is designed for RJ45 and RJ11 plugs; has a twisted-pair tester built into the cradle's handles to disconnect one part of the tester from the crimper;Prowered by 4xLR44 batteries - not included;Technical data:enables clamping of modular plugs:RJ45 - 8p8cRJ11 - 6p2cRJ12 - 6p6cRJ14 - 6p4cknives for cutting wiresknives for removing external insulation (flat cables)
The DIGITUS Industrial Gigabit Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Gigabit Switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit Switch is a flexible, cost-effective solution for the industrial environment.
airFiber 11Breaking free from the congested 5 GHz band, airFiber® 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications.Features: Full duplex Point-to-Point radio 11 GHz frequency operation Up to 1.2+ Gbps throughput Proprietary INVICTUS™ processor Integrates with airFiber® 11 GHz antennas Utilizes distinct Rx and Tx frequencies Accepts PoE or DC power Secure 128-bit AES encryption Power Source Options Support for PoE or DC power gives you the flexibility to power the AF-11 separately from Ethernet traffic. Reversible Duplexers Each duplexer has a low channel and a high channel that can be configured by simply reversing the position of the duplexer. Channel Configuration The airFiber AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific licensing requirements. The AF-11 also features different channel widths to suit your deployment needs, and you can independently configure TX and RX channel frequencies
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable since it accepts power from a wide variety of sources - USB Passive or Active PoE (802.3af and 802.3at) and power jack. In addition to using this device as a small and portable AP it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device for example you can connect a SXT CPE device to it. • PoE in 10-57V • Built in 2GHz AP • microUSB for a 3G/4G modem or for power input • Station or AP mode wireless • Any type PoE input 802.3af and 802.3at • Passive PoE output (same as input voltage)
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
RUT360 is an updated version of our all-time best-seller RUT240. This compact industrial cellular router offers a possibility to connect to the internet using cellular, Wi-Fi, and wired networks. RUT360 is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi, and 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps. Unique programming, remote monitoring, and security features make RUT360 perfect for IoT and M2M applications, where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited. 4G LTE CAT 6 Cellular speeds up to 300Mbps with Carrier Aggregation WIFI 802.11 b/g/n WiFi COMPACTNESS Small size - easy integration anywhere DURABILITY Rugged aluminium housing SECURITY Firewall and numerous VPN services, including OpenVPN, IPsec, PPTP, L2TP & SSTP RMS Compatible with Teltonika Remote Management System
Mounting type Flat surface mount Device attach mode Clip-on Material ABS + PC plastic Weight 13 g Screws included Self-tapping screws: DIN 14566 (4.2 mm x 32 mm), 2 pcs; Plastic expansion anchors: 6 mm x 30 mm, 2 pcs Dimensions 98.2 mm x 40 mm x 35.5 mm
Paindlik, usaldusväärne ja tööstusliku kvaliteediga võrgu kauguspikenduslahendus PLANET IGT-1205AT on tööstuslik Gigabitine Meedia Konverter, mis pakub mitteblokeerivat juhtmekiirust ja suurt paindlikkust Gigabit Etherneti laienduseks karmis tööstuskeskkonnas. See on varustatud ühe 10/100/1000BASE-T RJ45 vaskpordi ja kahe 100/1000/2500BASE-X SFP fiiberoptilise liidesega, mis on IP30 vastupidavas ja tugevas korpuses. IGT-1205AT sobib hästi rakendusteks seiresüsteemi juurutamiseks ning juhtimise ja juhtmevaba teenuse turvamiseks kliimatingimustes nõudlikes keskkondades laias temperatuurivahemikus -40 kuni 75 kraadi C. Kiudoptilise lingi võimalus võimaldab võrgu juurutamist laiendada Kaks SFP-porti ühilduvad 100BASE-FX, 1000BASE-X ja 2500BASE-X SFP (Small Form Factor Pluggable) fiiberoptiliste transiiveritega. Kiudoptiline üleslingi võime tagab läbilaskevõime kõigi võrku ühendatud sõlmede jaoks ja Gigabit Etherneti vahemaad saab pikendada 300 meetrilt (mitmemooduline fiiberoptiline kaabel) kuni 20/40/80/120 kilomeetrini (ühemoodiline fiiberoptika). Fast Etherneti vahemaad saab pikendada 2 km-lt (mitmemoodiline kiudkaabel) 20/40/60 kilomeetrini (ühemoodiline fiiberops). Need sobivad hästi tehase andmekeskustes ja distributsioonides kasutamiseks. Reguleeritav 3-pordiline lülitusreiim või 2-pordiline Fiber Redundant Mode Sisseehitatud DIP-lüliti kaudu saab IGT-1205AT kahte SFP-kiudliidest konfigureerida Etherneti lülitusreiimiks või fiiberliidese reiimiks. Etherneti lülitusreiimiga saab see töötada suure jõudlusega salvestamise ja edastamise mehhanismis; 2-pordilise Fiber-liigendava reiimiga tagab see ülioluliste Etherneti rakenduste jaoks kiire lingi. Üleliigne reiim toetab automaatse taastamise funktsiooni. Kui pakettide sihtport on link-alla, edastab see paketid varupaari teise porti. Keskkonnasõbralik disain IGT-1205AT on varustatud õhukest tüüpi IP30 metallkorpusega, et seda oleks lihtne kasutusele võtta rasketes tööstuslikes nõudlikes keskkondades. IP30 tööstusliku korpuse kaitsega IGT-1205AT pakub kõrgetasemelist häirekindlust elektromagnetiliste häirete ja tugevate elektriliste liigpingete vastu, mida tavaliselt leidub tehase põrandatel või äärekivide külgmistes liiklusjuhtimiskappides. Kuna IGT-1205AT saab töötada temperatuurivahemikus -40 kuni 75 kraadi C, saab seda paigutada peaaegu igasse raskesse keskkonda. IGT-1205AT võimaldab kapiruumi tõhusaks kasutamiseks ka DIN-liistule või seinale kinnitamist. Mugav ja usaldusväärne toitesüsteem Töökindluse ja paindlikkuse suurendamiseks on IGT-1205AT varustatud kahe alalisvoolu sisendpistikuga üleliigse toiteallika paigaldamiseks. See on ka integreeritud toiteallikas laia pingevahemikuga (12–48 V alalisvoolu või 24 V vahelduvvooluga) piisab kõrge kättesaadavusega rakenduste jaoks, mis nõuab kahe- või varutoitesendit.
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
This M.2 docking station by Delock enables the installation of an M.2 PCIe NVMe SSD and it can be connected via USB to the PC or laptop. The included USB cables allow the connection to a free USB Type-A or USB-C™ port. Ideal test equipment The memory is simply plugged into the robust metal housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly. Specification • Connectors: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female 1 x 67 pin M.2 key M slot • Chipset: Asmedia ASM2362 • Supports M.2 modules with key M or key B+M based on PCIe (NVMe) • Supports NVM Express (NVMe) • Bootable • Data transfer rate up to 10 Gbps • LED indicator for power and access • 1 x On / Off switch • Metal housing • Dimensions (LxWxH): ca. 49 x 49 x 12 mm • Hot Plug, Plug & Play System requirements • Chrome OS 78.0 or above • Linux Kernel 4.3 or above • Mac OS 10.15.2 or above • Windows 8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-C™ port or • PC or laptop with a free USB Type-A port Package content • M.2 docking station • Cable USB-C™ male to USB-C™ male, length ca. 30 cm • Cable USB-C™ male to USB Type-A male, length ca. 30 cm • User manual
unshielded LAN/network cable to connect network components with 2 RJ45 connectors UV- and water resistant double outer jacket (PE) with gold plated PINs with strain relief and latch protection suitable for 10/100/1000 Mbit-networks pair-sequence acc. to EIA/TIA 568B
