High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
16 x Gigabit PoE+ porti 2 x jagatud Gigabit-porti (RJ-45 või SFP) 36 Gbps kommutatsioonivõimsus Sisemine toiteallikas 440W PoE võimsuse eelarve Vähendab seadmekulusid, edastades andmeid ja toitu olemasolevate võrgukaablite kaudu Tugev rack-paigaldatav metallist korpus TRENDneti 18-portiline Gigabit High Power PoE+ Switch, mudel TPE-TG182F, vähendab seadmete ja paigalduskulusid, edastades andmeid ja energiat olemasolevatest Ethernet-kaablitest. See rack-paigaldatav ,suure võimsusega PoE-kommutaator pakub 16 gigabitilist PoE+ porti, mille PoE koguvõimsuse eelarve on 440 W. Sellel on ka kaks täiendavat jagatud RJ-45 või SFP gigabit-porti. TPE-TG182F suure võimsusega PoE-kommutaator annab kuni 30 W võimsust ühe pordi kohta selliste seadmete jaoks nagu suure võimsusega traadita pääsupunktid, PTZ (Pan/Tilt/Zoom) IP-kaamerad ja VoIP-telefonisüsteemid. Suure võimsusega PoE Selle suure võimsusega PoE-kommutaatori 440 W koguvõimsuse eelarve PoE varustab 16 Power over Ethernet seadet kuni 30 W võimsusega ühe pordi kohta. Gigabit-pordid Kaheksateist gigabiti porti pakuvad 36 Gbps kommutatsioonivõimsust, et toetada servavõrkude paigaldamist. Korpuse disain Tugev 19-tolline rack-paigaldatav metallkorpus koos kaasasolevate kinnituskinnitustega. Korpuse disain Pakub 16 gigabitilist PoE+ porti, 2 jagatud gigabitilist porti (RJ-45 või SFP), 36 Gbps kommutatsioonivõimsust, sisseehitatud toiteallikat ja rackmount-kinnitusi. Suure võimsusega PoE-kommutaator Annab kuni 30 W PoE+ võimsust ühe pordi kohta, koguvõimsuse eelarve on 440 W Jumbo Frame Saadab suuremaid pakette ehk Jumbo raame (kuni 9KB), et suurendada jõudlust. LED-indikaatorid LED-indikaatorid edastavad pordi olekut
QuMax Teltonika RUTX10 jaoksIntegreeritud Wi-Fi kahesageduslik 2,4 ja 5 GHz sektori antenn + Bluetooth sektori antenn + koht Teltonika RUTX10 paigaldamiseks (All-in-one). QuMAX pakub QuWirelessi antennidest kõige võimsamat Wi-Fi dual band 2,4 & 5 GHz sektoriantenni. See on mõeldud suure levialaga hotspotidele ja püsivõrkude tugijaamadele. See on mõeldud Teltonika RUTX10 ruuteri paigaldamiseks IP67 korpusesse. See on esimene valik tööstuskeskkonna püsipaigaldiste jaoks. Sellesse on sisseehitatud ka Bluetooth sektori antenn.Kõik antennid ja Teltonika ruuter on integreeritud ühte korpusesse.Välitingimustes kasutatav antenn töötab igas ilmastikutingimustes, IP67.Antenni on ruuteriga ideaalselt sobitatudPassiivne PoE tugiTranslated with DeepL.com (free version)
