Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Self-ventilated sheet steel housing, Front door with window made of safety glass, Lockable door, lock with latch, Door opening angle 180 degrees, Front profile rails fixed, Cable entry optionally from above or below (openings 120 mm x 35 mm), Paint finish: RAL 7035 (light grey), Delivery in transport packaging.
Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) The IMC-21GA industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/1000Base-SX/LX or selected 100/1000Base SFP module media conversion. The IMC-21GA supports IEEE 802.3az (Energy-Efficient Ethernet) and 10K jumbo frames, allowing it to save power and enhance transmission performance. All IMC-21GA models are subjected to a 100% burn-in test, and they support a standard operating temperature range of 0 to 60°C and an extended operating temperature range of -40 to 75°C.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
Selle Delocki tolmukattega on emasport kaitstud mustuse või kahjustuste eest. Tolmukatte kasutamine hoiab tundlikud pistikud pikaajaliselt kasutamisvalmis, eriti tolmuses keskkonnas ja tööstussektoris. Spetsifikatsioon - Tolmukate pistik RJ11 pistikupesa jaoks - Käepidemega - Materjal: nailon - Värv: valge - Mõõtmed (LxSxK): ca. 13,5 x 11,2 x 10,25 mm Pakendi sisu - 10 x tolmukate
This splitter by Delock receives a DisplayPort signal from a PC or laptop and splits it to four connected displays. Thereby one DisplayPort connection can be used to operate four DisplayPort monitors. The outputs are dual-mode capable (DP++), so that HDMI or DVI monitors can be connected with suitable adapters. Note The product is a Multi-Stream Transport (MST) hub and supports the extended desktop configuration of DisplayPort 1.2. When Mac OS is used, the same image is displayed on both ports (mirrored), it is not possible to use both ports independently of each other. Specification • Connectors: Input: 1 x DisplayPort 20 pin male 1 x 5 V DC jack Output: 4 x DisplayPort 20 pin female • Chipset: STDP4320 • DisplayPort 1.2a specification • Active converter, Single- / Multi-Stream Transport Hub (SST / MST) • Functions: Mirrored or Extended (Windows only) • Maximum resolution (depending on the system and the connected hardware): DisplayPort 1.1 or 1.2 Single Stream Transport (SST): up to 1920 x 1080 @ 60 Hz (mirror) DisplayPort 1.2 Multi-Stream Transport (MST): up to 2560 x 1440 @ 60 Hz or 3840 x 2160 @ 30 Hz (mirror or extended) max. 4x 1920 x 1080 @ 60 Hz • DisplayPort output supports Dual Mode DP++ • Supports Eyefinity / Single Large Surface (SLS) • Supports audio and video signals • Supports HDCP 1.3 • Audio input formats: 7.1 channel up to 192 kHz sample rate • Metal housing • Cable length without connectors: ca. 30 cm • Colour: black • Dimensions (LxWxH): ca. 143 x 67 x 23 mm Power supply specification • Wall power supply • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.4 A • Output: 5 V / 2 A • Ground outside, plus inside • Dimensions: inside: ø ca. 2.1 mm outside: ø ca. 5.5 mm length: ca. 9 mm System requirements • A free DisplayPort female Package content • DisplayPort Splitter • External power supply • User manual
The KMU2P converter emulates the presence of a keyboard and mouse (via the PS/2 connectors) to the device at all times. This means that when used with a KVM switch, there will be no delay in response when switching to this channel.
