The high quality Cat 6 patch cable from LogiLink is manufactured according to European standard EN 50173-1 as well as the international standard ISO/IEC 11801 It has 8 cores with a thickness of AWG 24/7 and is unshielded. The required cable length can be taken from a carton out of its opening and the remaining balance is thus protected from dirt and damage.
High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
This cable by Delock is used to extend a serial connection and can be used to connect various devices with D-Sub 37 pin connector. Specification • Connectors: 1 x D-Sub 37 pin male > 1 x D-Sub 37 pin female • Connectors with screws • Pin assignment: 1:1 • Cable gauge: 28 AWG • Cable diameter: ca. 8 mm • Operating temperature: 0 °C ~ 50 °C • Fire-resistance rating: VW-1 • Length incl. connectors: ca. 2 m • Colour: beige System requirements • A free D-Sub 37 pin female Package content • Serial cable
Diese PCI Express x4-Karte von Delock erweitert den PC um vier RJ45-Anschlüss für LAN-Verbindungen mit bis zu 1000 MBit/s. Dafür wird nur ein freier PCIe x4-Slot im PC benötigt. Dank der mitgelieferten Low Profile-Blende lässt sich die Karte auch in PC-Systemen mit kleinem Formfaktor nutzen.
Katab kuni 650 m² pinda laialdaselt ja stabiilselt • Wi-Fi 7 tehnoloogia tagab kiiruse ja madala latentsuse • Kiired juhtmega ühendused kolme gigabitipordiga • Toetab kuni 150 seadet samaaegselt • Lihtne haldamine MERCUSYS rakendusega
Für eine schnelle Internetverbindung im gesamten Haus braucht es kein Wunder – nur ein bisschen Magie. Mit dem Magic 2 LAN triple Starter Kit kreiert man zu Hause ein hocheffektives dLAN-Netzwerk mit Powerline-Technologie und genießt ununterbrochen schnelles Internet in jedem beliebigen Raum. Denn dLAN heißt: Internet aus der Steckdose. Internet wird hier über die vorhandene Stromleitung durch dicke Wände hindurch übertragen – so wird jede Steckdose zur potenziellen Netzwerkdose. Zusätzlich sichert der moderne G.hn-Standard der devolo Magic-Reihe nicht nur eine hohe Datenübertragungsrate, sondern auch eine extrem stabile Verbindung.
Seda Delocki USB-laadimiskaablit saab ühendada tasuta standardse USB A liidesega. Sisse/välja lülitit kasutades saab ühendatud seadme toiteallikat sisse või välja lülitada. Seetõttu ei ole toite väljalülitamiseks vaja emaspordist kaablit eemaldada. Spetsifikatsioon • Pistik: USB 2.0 Type-A isane > USB 2.0 Type-B Micro-B isane • Kaabli gabariit: 22 AWG toiteliin • Sisse/välja lüliti • PVC-st valmistatud pistikud • Kaabli läbimõõt: ca. 0,8 mm • Pikkus sh. pistik: ca. 1,5 m • Värvus: must Nõuded süsteemile • Vaba A-tüüpi USB-port Pakendi sisu • USB laadimiskaabel
