The Inter-Tech ST-729 is a single-port Gigabit LAN adapter for use in desktop environments. The Intel® i210 chipset, with its implemented features, can largely relieve the main processor, so that network transfer no longer places as much demand on the main processor as is often the case with normal network cards, and it is also energy-efficient with low power consumption in idle mode according to IEEE802.3az.
See Delocki kaabel võimaldab ühendada DVI-liidesega seadmeid, nt monitori, DisplayPort-liidesega. Spetsifikatsioon Liitmikud: 1 x DisplayPort isane > 1 x DVI 24+1 isane koos kruvidega Kiibistik: PS8402A DVI-D (Dual Link), VGA juhtmeta DisplayPort 1.2a spetsifikatsioon Passiivne kaabel (level shifter), sobib ainult DP++ väljundiga graafikakaartidele Signaali suund: DisplayPort sisend > DVI väljund Kaabli gabariit: 30 AWG Kaabli läbimõõt: umbes 6 mm Twisted-pair kaabel Vaskjuht Kontaktid kullatud Kolmekordselt varjestatud kaabel Andmeedastuskiirus kuni 10,2 Gb/s Resolutsioon kuni 3840 x 2160 @ 30 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) Värv: must Pikkus ilma pistikuteta: ca 2 m Süsteeminõuded Vaba DisplayPort DP++ emissioon Pakendi sisu DisplayPort-DVI kaabel
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 34 AWG - Kaabli läbimõõt: ca 4,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 1 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
This converter by Delock enables the connection of a device with USB Type-C™ male to a USB Type-A female port. Specification • Connector: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A male (host) 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female (device) • Chipset: Etron EJ179V • Maximum output current: 1.5 A • Cable diameter: ca. 5 mm • Data transfer rate up to 10 Gbps • Colour: black • Length without connector: ca. 15 cm System requirements • PC or laptop with a free USB Type-A port Package content • USB-C™ converter
XQ+31LC02D A QSFP28 module for distances up to 2km in your 100 Gigabit setups. 1271, 1291, 1311, 1331 nm The MikroTik 100 Gigabit product line keeps growing! Add this QSFP module for distances up to 2km to your CCR2216 or CRS504 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions, including optical power monitoring, and will perform well in environments up to 70° C. It has been designed to meet the harshest conditions, including temperature, humidity, and EMI interference, so we definitely recommend this as a reliable solution for all your 100 Gbps QSFP28 devices.
The Aruba CX 6100 Switch Series is a modern family of entry level access switches ideal for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications.Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements.
Ubiquiti UVC-G5-Bullet on kompaktne ja suure jõudlusega turvakaamera, mis on loodud paindlikuks paigaldamiseks. Kaamera mõõtmed ilma kinnitusteta on Ø75,5 x 74,4 mm ja koos kinnitusega Ø75,5 x 150 mm, kaaludes vastavalt 225 g ja 315 g. Korpus on valmistatud vastupidavast polükarbonaadist ja alumiiniumisulamist, pakkudes IP55 ilmastikukindlust ja IK04 löögikindlust, et tagada usaldusväärne töö välistingimustes.Kaamera sisaldab 5MP CMOS sensorit ja fikseeritud fookuskaugusega objektiivi, mis tagab laia vaatenurga (H: 84,4°, V: 45,4°, D: 99,8°) ning maksimaalse eraldusvõime 4MP (2688 x 1512) 30 FPS juures. Kaameral on sisseehitatud IR LED valgustus ja IR lõikefilter öise nägemise parandamiseks.UVC-G5-Bullet töötab PoE toitel, tarbides maksimaalselt 4W ja on ühilduv 37-57V DC-ga. See toimib temperatuurivahemikus -20 kuni 40ºC ja niiskustasemel 0 kuni 90%. Kaameral on mikrofon (võimalik keelata) ning edasijõudnud pildiseaded nagu värvi, heleduse, kontrasti ja mürataseme reguleerimine.Kaamera integreerub sujuvalt UniFi Protect tarkvaraga, nii veebis kui mobiilis (iOS ja Android), tagades lihtsa seadistuse ja halduse.
Soolise vahetusmooduliga kahe USB-C™ pesa ühendamiseks, mida saab kasutada universaalselt kõikides USB-C™-ga seadmetes, nt nutitelefonis, sülearvutis või tahvelarvutis.USB-seadmega püsivalt ühendatud kompaktne USB-C™ pistik kaitseb seadme porti, kui ühendate sageli laadimis- või andmesidekaableidToetab USB4™ ja seega ülikiiret andmeedastust kiirusega kuni 40 Gbit/s ning Power Delivery (EPR) kaudu kuni 240 W laadimisvõimsustPakub teravat videokvaliteeti kuni 8K @ 60 Hz ja ühildub nii USB 3.1, USB 2.0 kui ka Thunderbolt™ 3 ja Thunderbolt™ 4 seadmetega.Kvaliteetne, tugev metallist korpus, mis on meeldiva puudutusega ja tagab erakordse vastupidavuseÜlikompaktne formaat, mis mahub igasse kotti ja on mugav kaaslane reisil ja liikvel olles
Advanced Manageable PoE Solution for Hardened Environment PLANET IGS-5225-4P2S L2+ Industrial Managed PoE+ Switch, featuring 4 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 2 100/1000X fiber ports in an IP40 rugged but compact-sized case, can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-4P2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 10ms. Cybersecurity Network Solution to Minimize Security Risks The cybersecurity feature that virtually needs no effort and cost to have includes the protection of the switch management and the enhanced security of the mission-critical network. Both SSH and SSL protocols are utilized to provide strong protection against advanced threats. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-4P2S’ GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI. Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the IGS-5225-4P2S features the following special PoE management functions: PD alive check Scheduled power recycling PoE schedule PoE usage monitoring Intelligent Alive Check for Powered Device The IGS-5225-4P2S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-4P2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-4P2S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-5225-4P2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-5225-4P2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-5225-4P2S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-4P2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-4P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-4P2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-4P2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 2 trunk groups with 2 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-4P2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-4P2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-4P2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225-4P2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP Provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-4P2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-4P2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-4P2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-4P2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Industrial Area Department/Workgroup PoE Switch Providing up to 4 PoE+, in-line power interfaces, the IGS-5225-4P2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 4 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-4P2S makes the installation of IP cameras or wireless AP easier and more efficient.
See Delocki USB-kaabel võimaldab USB 3.0 ühenduse pikendamist ja on varustatud väärika metallkorpusega ning kullatud pistikutega. Märkus Aktiivsete USB-seadmete, nt väliste kõvakettakappide kasutamiseks on vaja ühendatud seadme jaoks täiendavat toiteallikat. Spetsifikatsioon - Ühendused: 1 x USB 3.0 Type-A isane > 1 x USB 3.0 Type-A emane - Kaabli gabariit: 28 AWG andmeliin 22 AWG toiteliin - Paindumiskaitse ristumiskohal - Kaabli läbimõõt: ca 5,5 mm - Vaskjuht - Kontaktid kullatud - Ühendused kullatud punase metallkorpusega - Kaabel topeltvarjestatud - Andmeedastuskiirus kuni: SuperSpeed 5 Gbps, Hi-Speed 480 Mbit/s, Full-Speed 12 Mbit/s, Madala kiirusega 1,5 Mbit/s - Värv: Kaabel: must pistikud: punane - Pikkus koos pistikutega: ca. 5 m Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB 3.0 pikenduskaabel
The LANCOM GS-4530XP is a switch designed to meet the demands of modern networking environments. With a throughput of 324 Gbps and a total of 30 ports, including 12 10/100/1000 (PoE+) and 12 100/1000/2.5G (PoE+), it offers connectivity options. Its stackable form factor and internal power supply with power redundancy ensure reliability and flexibility for various network configurations. Featuring support for Layer 3 switching and management protocols such as SNMP 1, SNMP 2c, and SNMP 3, this switch allows for efficient remote management. The integration of Quality of Service (QoS), Voice VLAN, and multiple Spanning Tree Protocols (STP, RSTP, MSTP) enhances performance by ensuring smooth traffic handling. Additionally, the 4MB packet buffer further supports high traffic loads, making LANCOM GS-4530XP a capable solution for businesses looking to optimize their network infrastructure.
Ruuter ASUS RT-AX53U UK Järgmise põlvkonna WiFi standard on WiFi 6(802.11ax) standard, mis toetab MU-MIMO ja OFDMA tehnoloogiaid parema efektiivsuse ja ribalaiuse tagamiseks. Ülikiire WiFi kiirus – RT-AX53U toetab 1024-QAM-i, et traadita ühendus oleks oluliselt kiirem. Võrgu kogukiirus on umbes 1800 Mbps – 574 Mbps sagedusalas 2,4 GHz ja 1201 Mbps sagedusalas 5 GHz. Suurendage võimsust ja tõhusust – toetab mitte ainult MU-MIMO-d, vaid ka OFDMA tehnikat, et kanaleid tõhusalt levitada, mitme seadmega korraga suhelda 4 Gigabit Ports – üks Gigabit WAN port ja kolm Gigabit LAN porti, 10 korda kiiremad kui 100-base T Ethernet. AiProtection ja Parental Control – aitavad kaitsta võrku ja võimaldavad määrata kliendi võrgukasutuse ajalimiidi
MS110P 10-Port 10/100Mbps Desktop Switch with 8-Port PoE+ - 10 Ports: 10× 10/100 Mbps RJ45 ports with 8 PoE+ ports - Two Cables in One: With 8 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - 2× Uplink Ports: MS110P provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort - PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
The DIGITUS Professional network cable is designed with precision, featuring an American Wire Gauge (AWG) of 23/1 and constructed using Foam-Skin Polyethylene (SFS-PE) insulation for durability and high performance. Its Low Smoke Zero Halogen (LSZH) jacket enhances safety by reducing toxic emissions in the event of a fire, making it suitable for various environments. Engineered to meet the demands of current and future network applications, it supports a wide range of standards, including IEEE 802.3 and DIN EN 50173, and is tested for frequencies up to 1250 MHz, suitable for high-speed data and video applications. Its design includes PoE and PoE+ readiness, allowing for flexible deployment in networks requiring power over Ethernet. With its advanced features and compliance with multiple standards, the DIGITUS Professional network cable ensures reliable, high-speed connectivity in any setting.
Wi-Fi 7 tri-band kuni 2882 Mbps • Bluetooth 5.4 pakub suuremat ulatust ja kiirust • Kaks võimsat antenni parema katvuse jaoks • WPA3 krüpteerimine parandab turvalisust
Discover the full potential of your networkDiscover a reliable and efficient Plug&play network device. With 8 10/100 Mbps ports with PoE and additional Uplink ports (RJ45 100 Mbps), the device allows you to create a flexible and scalable LAN without unnecessary power cables, external power supplies or additional switches. Two Uplink ports allow you to conveniently connect the switch to a router, NVR recorder or another switch, facilitating the construction of a flexible and scalable network infrastructure.Reliable communication - Widely used in any spaceThe switch has been designed for users who need a reliable network connection in various environments:IP monitoring systems - Power IP cameras directly via an Ethernet cable,Wi-Fi access points,Ideal for expanding your home Ethernet network and powering network devices in one place, without complicated configuration,Building automation and IoT - Powering sensors, controllers and network devices in smart home and industrial automation systems,Video door phones and access control - in entry control systems, video door phones and recorders where a reliable PoE power supply is required. Power up and transfer data at speeds of up to 100 Mb/sDiscover new possibilities with the Qoltec device, which offers:8 RJ45 PoE Fast Ethernet 10/100 Mbps ports,2 RJ45 Uplink ports for connecting a router or further network expansion, Compliant with the IEEE 802.3af standard - offering up to 15.4W per port and a total of 120W output power for the entire switch,Automatic detection of PoE devices,Data transfer speed up to 100Mb/s, Robust metal housing protects the electronics inside and allows operation in more demanding conditions,Quiet operation thanks to passive cooling, Plug&Play no configuration required. Quiet operation, sturdy metal construction and instant installationOur device offers instant and hassle-free installation thanks to Plug&Play technology, which requires no additional configuration or specialist technical knowledge. All you need to do is follow a few simple steps. First, connect the devices to the appropriate RJ45 ports using the appropriate network cables, then connect one of the ports to your router or access modem. Ensure that the LEDs on the switch indicate activity on the ports. The durable metal housing protects the electronics, ensures durability, resistance to electromagnetic interference and effective heat dissipation, which translates into long and stable operation of the device.
