airCUBE - airMAX Home Wi-Fi Access PointWith a compact design and integrated 24V PoE passthrough, the airCube™ is a home Wi-Fi access point designed to interoperate with airMAX® CPEs and is available in two models. UNMS SupportUbiquiti Network Management Software simplifies remote network management. Super Antenna Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points. 24V PoE Passthrough The airCube can be powered by and provide power to an airMAX CPE using 24V PoE. Sleek Design The airCube's attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.
Quick-MountToolless Quick-Mounts for Ubiquiti CPE Products.Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design.Features: No tools required Quick and easy installation Supports NanoStation, NanoStation Loco, and NanoBeam devices Flexible, easy alignment
> Layer 2 management PoE switch > Intelligent PoE > Red port supports 90W IEEE802.3bt > Web management with friendly interface and easy operation > 250 m long distance PoE transmission > PoE watchdog > Plug and play Communication Standard: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE 802.3ab; IEEE 802.3z PoE Standard: IEEE802.3af/ IEEE802.3at/ Hi-PoE/IEEE802.3bt Port 1-16: 16 × RJ-45 10 M/100 M (PoE) Port 17-18: 2 × RJ-45 10 M/100 M/1000 M (uplink) Port 17-18: 2 × SFP 1000 M (uplink) (combo) PoE Budget: Port 1-2 ≤ 90W, Port 3-16≤ 30W, total ≤ 240W
MS106LP 6-Port 10/100Mbps Desktop Switch with 4-Port PoE+ 6 Ports: 6× 10/100 Mbps RJ45 ports with 4 PoE+ ports Two Cables in One: With four PoE+ ports, transfers data and power on one single cable High Power PoE+: Support PoE Power up to 30 W for each PoE port and 40 W for all PoE ports 2× Uplink Ports: MS106LP provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode Isolation Mode: One click to divide traffic for specific ports for stability and security Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs Durable Metal Casing: Allows for efficient heat dissipation and long network life Plug and Play: Simple to use and saves time and effort PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
We’re thrilled to announce the release of the newest product in the Fibaro family, the Dimmer 2!Expanding on the success of the Dimmer, the Dimmer 2 has some amazing new features – including:- Adaptive, self-calibrating dimming (supports leading and trailing edge lamps)- Power Metering- 2-Wire compatible (no neutral required)- Z-Wave 500 series chip- Z-Wave Plus Certified- Build-in Configuration LED- New larger, more secure screw terminalsTüüpDimmerKarbikujundusEraldiseisevToote värvMustKorpuse värvMust
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: wire tracer, tester Lisaandmed: Location of the sought wires, Verification ja identification of wires ja their condition, Measurement ja test continuity of wires, Searching ja verification shorted wires, Testing of open circuits või short circuits function, DC level testing function, Finding ja statement of wires function, Automatic ja quick scan function, Earphone function, Volume adjusting function, Spotlight function, toiteplokk Netokaal: 0.42 kg
Product kirjeldus: DIGITUS Professional DN-93617 - modular insert Product Type: Modular insert - CAT 6a - RJ-45 mõõtmed (WxDxH): 1.45 cm x 3.53 cm x 1.95 cm kaal: 19.05 g Product Material: Die-cast zinc Port kogus: 1 port Compliant Standards: ISO/IEC 11801, TIA/EIA-568-C.2, IEC 60603-7-5, IEC 60603-7-51, ISO/IEC 11801:2010-04
Fiber + Power Solution for Outdoor PoE DevicesOvercome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. Fiber-to-Ethernet ConversionThe FiberPoE provides fiber connectivity to any PoE device.Designed for Outdoor DurabilityThe FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.Power VersatilityThe FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1.5 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
This unit is a direct upgrade of Mikrotik previous 10G SFP+ 10 km module: more functionality for the same price. Mikrotik has added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
Model: X5000R Antenna gain: 5 Security: IP address / port filtering MAC address filtering URL Filtering Management, monitoring, configuration: Internet settings Wireless settings Parental control Network settings for guests Smart QoS Power supply: 12V DC / 1A Dimensions: 241 x 147 x 48.5 mm Other features: Networking Internet configuration LAN network configuration DDNS IPTV IPv6
M1800 1-Pack AX1800 Whole Home Mesh WiFi System AX1800 WiFi network 6 1201 Mbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band Seamless roaming, coverage throughout your home 2 Gigabit Ethernet ports + 4 internal antennas MU-MIMO, Beamforming, WPA3 PPTP/L2TP/OpenVPN/WireGuard/IPSec/Zerotier Compatible with over 15 DDNS providers
> 16 × RJ-45 10/100 Mbps ports. > Wide operating temperature ranging from –10 °C to +55 °C. > Easy to install, and is plug and play. > Supports wall mount and desktop mount.
2.4Ghz 5dBi Dipole antennas with RPSMA connectors. Take BaseBox2 and simply attach two of those antennas on connectors of BaseBox2 to have 2x2 MIMO 2.4Ghz AP! By this you can have "2.4Ghz OmniTik", ideal for Outdoor Campus areas, for example, campings or trailer parks. Antennas are waterproof, so you can use BaseBox without top cover if both antennas are properly attached.
Netgear 5 x 10/100/1000 Platinum Ethernet Switch, Lifetime Hardware Warranty Type Ethernet Switch Modem speed 10/100/1000 Mbps Gigibit Ethernet I/O ports 5 Ports Connector type Plastic LED Power, Link/Activity Form Factor Desktop or wall-mountable Noise 0 dBA (Fanless) Power 5V / 0.7A DC Power Adapter Power consumption 2.34 W Max. Features Energy Efficient Ethernet Support (IEEE 802.3az); 9,216 bytes Jumbo Frame Support; 2K MAC table; 1 Mbit Packet buffer; MTBF (@ 25° C): 1,386,257 hours; Electromagnetic compliance: Class B Dimensions 118 x 73 x 30 mm Weight 0.10 kg
