Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.
Features- 4-port DVI KVMP Switch with USB 2.0 and 2.1 Surround Sound Audio- One USB console controls four computers and two additional USB devices- 2-port built in USB 2.0 hub fully compliant with the USB 2.0 specification- Full bass response for high quality 2.1 channel surround sound systems- Computer selection via front panel pushbuttons, hotkeys, and mouse- Multiplatform support – Windows, Linux, Mac, and Sun*- Independent switching of KVM, USB, and Audio focus- DVI digital and analog monitor support – fully compliant with the DVI specifications- Superior video quality: 1920 x 1200 @ 60Hz (Single Link); 2560 x 1600 @ 60Hz (Dual Link)- nVidia 3D Vision Ready: Works with 120Hz LCD monitors and active shutter glasses to create a 3D environment with maximum resolution of up to 1920 x 1080- HDCP compatible- Support widescreen resolutions- Video DynaSync™ – Exclusive ATEN technology that eliminates boot-up display problems and optimizes resolution when switching between ports- Power on detection – if one of the computers is powered off, the switch will automatically switch to the next powered-on computer- Console mouse port emulation/bypass feature that supports most mouse drivers and multifunction mice- Console keyboard emulation/bypass feature that supports most gaming / multimedia keyboards- Complete keyboard emulation for error-free booting- Mac/Sun keyboard support and emulation*- Multilingual keyboard mapping – supports English, Japanese, and French keyboards- Auto Scan Mode for monitoring all computers- Firmware upgradable* PC keyboard combinations emulate Mac/Sun keyboards* Mac/Sun keyboard work only with their ownPackage Contents- 1x CS1784A USB DVI Dual Link KVMP™ Switch- 4x 2L-7D02UD DVI-D KVM Cable Sets- 1x 0AD6-1605-24EG Power Adapter- 1x User InstructionsKontrollitavate arvutite arv4Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpDVI-IUSB 2.0 portide arv2DC-pistikJahMaksimaalne resolutsioon2560 x 1600 pikslitMaksimaalne digitaalresolutsioon1920 x 1200 pikslitMaksimaalne analoogresolutsioon1920 x 1080 pikslitToote värvMustLED-indikaatoridJahMaterjalMetallSisseehitatud ekraanEiVõimsustarve (tüüpiline)10 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahLaius87 mmSügavus270 mmKõrgus55 mmKaal930 gKiirpaigaldusjuhendJahJuhendJahÜhenduvustehnoloogiaJuhtmega ühendatudMõõdud (l x s x k)270 x 87 x 55 mm
Features- One USB console controls eight Single Link DVI or VGA computers and two additional USB 2.0 devices- Supports both digital (DVI) and analog (VGA) video – mixed operation Possible- Cascadable to three levels – control up to 512 computers- Multiview mode – stack up to four CS1768 units and display video from up to four monitors (dual view / triple view / quad view)- Computer selection via front panel pushbuttons, hotkeys, and multilingual on-screen display (OSD)- OSD Backup/Restore function – enables the administrator to back up the switch´s configuration and user profile information- 2-port USB 2.0 hub built in- Fully compliant with the USB 2.0 specification- Two-level (Administrator/User) password authorization for enhanced security protection- Multilingual OSD supports English, German, Japanese, Traditional Chinese, Simplified Chinese, Spanish, Russian, and French- Audio enabled – full bass response provides a rich experience for 2.1 channel surround sound systems- Console audio ports on front panel for easy access- Multiplatform support – Windows, Linux, Mac, Sun- Supports widescreen resolutions- Superior video quality – 1920 x 1200 (Single Link DVI); 2048 x 1536 (VGA); DDC2B- Independent switching of KVM and USB focus- DVI digital and analog monitor support – fully compliant with the DVI specifications- HDCP compatible- Video DynaSync™ – exclusive ATEN technology eliminates boot-up display problems and optimizes resolution when switching between ports- Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice Chinese, and Spanish- Complete keyboard emulation for error-free booting- Mac/Sun keyboard support and emulation*- Multilingual keyboard mapping – supports English (US), English (UK), French, German, Japanese, Korean, Traditional- Auto Scan Mode for monitoring all computers- Broadcast mode – allows you to send commands from the console to all computers to perform operations simultaneously.- Firmware upgradableNote: PC keyboard combinations emulate Mac/Sun keyboards; Mac/Sun keyboard work only with their own computersPackage Contents- 1x CS1768 8-Port USB DVI KVM Switch with Rack Mounting Kit- 2x 2L-7D02U USB DVI-D KVM Cable Sets- 1x Firmware Upgrade Cable- 1x 0AD6-1605-24EG Power Adapter- 1x Foot Pad Set (4 pcs)- 1x User InstructionsKontrollitavate arvutite arv8Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpDVI-IUSB 2.0 portide arv10Kõrvaklapiväljundite arv8DVI-I liideste arv8VGA (D-Sub) portide arv1Mikrofoni sisendite arv8Maksimaalne resolutsioon2048 x 1536 pikslitMaksimaalne digitaalresolutsioon1920 x 1200 pikslitMaksimaalne analoogresolutsioon2048 x 1536 pikslitToote värvSinineLED-indikaatoridJahMaterjalMetallSkaneerimisintervall255 sVõimsustarve (tüüpiline)3,76 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahSertifikaatTW I220489, CN ZL 02824593.8, DE 202004004227.4, JP 4558319, JP 4651633, TW 203183, TW I220476, TW I285828, US 6934398, US 6957287, US 7047344, US 7269265, US 7340556, US 7472217RoHSLaius161,1 mmSügavus437,2 mmKõrgus44 mmKaal2,8 kgKaablid kaasa arvatudKVMKiirpaigaldusjuhendJahJuhendJahAC-adapter kaasa arvatudJahÜhenduvustehnoloogiaJuhtmega ühendatudPortide hulk8Ühilduvad operatsioonisüsteemidWindows, Linux, Mac, Sun
DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.* - Mikrotik LtAP mini sold separately!
Industrial LTE Cat 4 Gateway Board TRB140 is equipped with a single Ethernet port, Digital Inputs/Outputs and micro-USB port. TRB140 compact design makes this Gateway perfect for an application where a sole gadget must be granted reliable Internet connectivity. TRB140 is engineered to be used in an Industrial application therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.MobileLTE(Cat4)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTEEthernet1 x 10/100/1000 MbpsInput/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketConfiguration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)Remote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight35 g
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 plug Wiring type: FTP-shielded 4 twisted-pair kaabel Lisaandmed: This splitter enables you to double a fixed võrguseade connection, without the need, 8P8C LAN FTP port combiner/splitter adapter värv: Aluminum kõrgus: 25 mm laius: 68 mm pikkus: 200 mm
Sporting a sleek industrial design, the U Fiber WiFi is a robust, high‑performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi. Features: High-Performance GPON CPELED diodes for easy diagnosticsUp to 2.4 Gbps Downstream and 1.2 Gbps UpstreamSupports up to 20 km GPON LinksPowerful Layer 2/3 Management FeaturesGPON WAN Port4x RJ45 Gigabit LAN PortSC/APC Fiber Connector802.11n Wi‑Fi Status LEDs The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.Versatile Power The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC. Designed for Integration Up to 128 UFiber WiFi devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the UFiber OLT and third-party OLT devices.
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone!
Power seadme tüüp: Power over Ethernet Power Device Location100-240 V Input sagedus: 50/60 Hz Rated Input Current1.3 A Input Power Ühendusi Quantity: 1Input Power Ühendusi Type: IEC-320 C6 väljund pinge1väljundusvõimsus Ühendusi Type: RJ-45 Package Type1mm Nominal kaal: 0.192 kg Warranty Products Returnable: Jah garantii Term (month)12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 17.5 kg Packs in Box: 501
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1.5 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
UFP-VIEWPORTThe UniFi Protect ViewPort allows you to view your UniFi Protect camera feeds on an HDMI display. It uses Power over Ethernet and connects to the local network hosting your cameras and connects via HDMI to a display. The UniFi Protect ViewPort offers 4K video output at 30 frames per second. Protect systems can be viewed in custom high-density camera matrix configurations.
EXTREME ATOM AP30 ACCESS/MESH POINT, DUAL RADIO WIFI 5 WITH CLIENT MODE SUPPORT, 1GE FOR BACKHAUL/BRIDGE, BLE, INTEGRATED TYPE C EU-COMPATIBLE POWER PLUG. CE REGULATORY DOMAIN. INCLUDES EXTREMECLOUD IQ CONNECT AND HIVECARE COMMUNITY
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
QNAP TL-D400S. Toote tüüp: HDD/SSD ümbris. Toetatud ketaste arv: 4, Ketta suurus: 2.5/3.5", Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III. Andmeedastuskiirus: 6 Gbit/s. Käigultvahetus. Toote värv: Must, Hall
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
