Lihtne paigaldus 4 x Gigabit PoE+ porti ja 1 x Gigabit porti Võtab DIP-lüliti sisse, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. DIP-kommutaator toetab VLAN-portide isoleerimist ja QoS-i 10 Gbps lülitusvõimsus 32W PoE eelarve Seinale paigaldatav disain Vastupidav metallist lüliti Kasutage koos TRENDneti PoE jagajaga, et ühendada võrku ja toita mitte-PoE-seadmeid 5-pordiline Gigabit Long Range PoE+ Switch, mudel TPE-LG50, edastab andmeid ja toite üle olemasolevate Ethernet-kaablite Power over Ethernet (PoE) seadmetele, nagu pääsupunktid, VoIP-telefonid ja IP-kaamerad. See toetab nii PoE (802.3af) kui ka PoE+ (802.3at) seadmeid 32 W PoE-eelarvega. Võta DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel, et pikamaa PoE-installatsioonid saaksid toimida. Ühendage ja mängige see tugev metallist lüliti usaldusväärseks kiireks PoE-võrguks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. PoE+ võimsus 32 W PoE-võimsuse eelarve toetab kuni nelja Power over Ethernet seadet. Gigabit Viis Gigabit-porti pakuvad 10 Gbps kommutatsioonivõimsust, et toetada servavõrkude paigaldamist. Pikaulatuslik PoE+ kommutaator Võta DIP-lüliti kasutusele, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta 32 W võimsuse eelarvega. Pordid Neli Gigabit PoE+ porti ja üks Gigabit-port Pikaulatuslik PoE+ Võtab DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) pikkade PoE-paigaldiste jaoks. Portide isoleerimine DIP-lüliti on ideaalne järelevalvevõrkude rakenduste jaoks, kuna see võimaldab ka portide 1-4 isoleerimist. Lülitusvõimsus 10 Gbps lülitusvõimsus Korpus Seinale paigaldatav metallist korpus LED-indikaatorid LED-indikaatorid edastavad PoE ja pordi olekut
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
Recently we’ve seen a demand for additional pole-mounting options for our popular SXTsq devices. You ask – we deliver! The new QM-X adapter enables vertical and horizontal adjustment on the pole.It is lightweight, easy to use, extremely durable and without any small parts that might break. Pick it up today for the price of a milkshake and enjoy simple positioning of your SXTsq devices like never before!Compatible devices: SXTsq series, DISC 5
We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't even need to turn off the device.
The LevelOne WAB-6010 is a managed, outdoor single-band 802.11n wireless access point, capable of 300 Mbps wireless internet speeds. The device runs on 2.4 GHz frequency, and can be used as part of a managed network when controlled by the LevelOne WAC-2000/WAC-2003 Wireless LAN Controller. LevelOne WAB-6010 also offers PoE, removing the need for an external power supply, which makes it easy to install. Advanced weatherproof design, rated to IP65 means the WAP is designed for outdoor deployments, and can withstand rain, humidity, dust, snow and extremely hot conditions. A fast, versatile and secure access point for a wide variety of outdoor network requirements.Share your wireless network up to 300MbpsCompatible with IEEE 802.11b/g/n wireless standardsMulti-operation modes to suit different wireless applicationsDual power support: 12V DC/PoE (IEEE 802.3at)Weatherproof IP65-rated housingProvides up to 4 SSIDs to separate network traffic and enhance security
AF11-Complete-LBairFiber 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market that breaks free from the congested 5 GHz band. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications. Features:-Full duplex point-to-point radio-11 GHz frequency operation-Up to 1.2+ Gbps throughput-Includes one low-band duplexer for SISO mode (MIMO mode requires an optional second duplexer)-Integrates with AF-11G35 11 GHz antenna-Supports separate TX/RX frequencies-Accepts PoE or DC powerWorks with UNMS Network Controller:-Manage your networks from a single control plane-Intuitive and robust configuration, control and monitoring-Remote firmware upgrade-Automatic client shaping-Customer billing
See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes. See ühildub täielikult GSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth ja LoRa 868 MHz / 915 MHz.SpetsifikatsioonÜhendused: 2 x SMA pistik: 2 x SMA pistikGSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth, ISM,LoRa 868 MHz / 915 MHz, MIMOSagedusvahemik:698 - 960 MHz1710 - 2700 MHzAntenni võimendus: 8 dBiImpedants: 50 OhmVSWR: 2,0Polarisatsioon: vertikaalne, horisontaalneHBW horisontaalne kiirteelaius: 75°VBW vertikaalne kiirguslaius: 65°.Kaabli tüüp: RG-58Kaabli pikkus koos pistikutega: ca. 10 mTöötemperatuur: -40 °C ~ 65 °CKorpuse materjal: ABSKaal: ca. 0,7 kgMõõtmed (LxSxK): ca. 23,7 x 22,9 x 5,0 cmMax. Poldi läbimõõt: ca. 5,5 cmSüsteeminõudedSeade kahe vaba SMA-liitmikugaPakendi sisuAntenniPaigaldusmaterjal:Mutter, seibid, kinnitusklamber ja posti kinnitusmaterjal: mutter, seibid, kinnitusklamber ja posti kinnitusklamber
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.5 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 3 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
4 x Gigabit PoE+ ports 1 x Gigabit port 120W PoE power budget 10Gbps switching capacity Supports jumbo frames up to 9KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
QuMax for Teltonika RUTX09 Integrated outdoor multi band high power LTE directional antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUTX09 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It has embedded also GPS antenna. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
LTU-ROCKET Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP) BaseStation radio in LTU™ product family. Operating in the 5 GHz frequency band, the LTU Rocket is a spectrally efficient, noise-resilient PtMP AP specifically designed for wireless ISPs (WISPs).Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades. Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.Primary features of the LTU Rocket include:• 600+ Mbps PtMP performance(1)• Up to 64 client connections per AP(2)• 2+ Million pps• Proprietary RF filtering (1) 1+ Gbps with future firmware upgrade. (2) 255 client connections with future firmware upgrade. Superior PerformanceLTU is a new, proprietary technology with custom silicon and radio design that break through the limitations of 802.11 Wi-Fi technology. This enables LTU to deliver far superior performance over previous airMAX products that are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the ground floor up. Its core communications processing engine enables low latency, long-range capability, DFS flexibility, higher constellations, better power output, and improved receive sensitivity.Seamless CompatibilityThe LTU Rocket is designed to be paired with a variety of Ubiquiti antennas to suit the needs of each installation. The radio includes a mounting bracket that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU Rocket radios with the airPrism® 5 GHz 3x30° HD Sector Antenna for co-location deployments.The LTU Rocket also works with any CPE device in the LTU family, such as the LTU-Pro.
10G-ready rackmount 16-port 1U patch panel Cat6A patch panels deliver a steady connection to copper gigabit & 10G switches Shielded design to eliminate EMI and crosstalk Compatible with Cat5e, Cat6 and Cat6A cabling Color-coded labeling for T568A and T568B wiring schemes 110 IDC type terminal blocks (use 110 or Krone type tool) Use with TRENDnet TC-PDT Punch Down Tool (sold separately) Supports ANSI/EIA/TIA 568-B.2-1 and ISO/IEC 11801 Supports ANSI/EIA/TIA 310-D, and EN50173-1 90° angle type Operating temperature: -25° – 50° C (-13° – 122° F) 2 year warranty
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
