Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
Ideal Cost-effective Solution for Secure IP Surveillance InfrastructurePerfectly-integrated Solution for PoE IP Camera and NVR SystemIntelligent LED Indicator for Real-time PoE UsageRobust Layer 2 FeaturesFlexible and Extendable Uplink Solution
Tootja: Lanberg Tootegrupp: Complete outlet Type of ühenduspesa: 1 x RJ45 ports: 1 Wiring type: FTP-shielded 4 twisted-pair kaabel, CAT5e, Shielded Category: 5e kasutusvaldkond: on wall/surface mounted Lisaandmed: Allows connection of conductors 26-22 AWG, universaalne IDC/LSA Ühendusi in accordance koos T568A/B laius: 0 mm kõrgus: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: valge
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge
Rocket® Prism access points incorporate high-performance airMAX ac and airPrism technologies for maximum performance of wireless networks in high-density areas. 2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications) 2.4 GHz Coverage The Rocket® Prism 2 AC covers the full 2.4 GHz radio.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket Prism 2 AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications)
Seda Delocki punutud kaablirüüsi saab kasutada avatud kaablite, elektriliste torude või juhtmete ühendamiseks, et kaitsta neid mustuse või kahjustuste eest. Venitatav Kaabirüüs on väga veniv, mis võimaldab mahutada mitu erineva läbimõõduga kaablit. Suurepärane vastupidavus Kaabirüüsi iseloomustab kulumiskindlus ja kuumakindlus. Taaskasutatav Kaableid ja torusid saab lisada või eemaldada mitu korda. Lõigatav Kuumalõikevahendiga saab kaablirüüsi pikkust individuaalselt lühendada. Spetsifikatsioon Pikkus: ca. 10 m Läbimõõt: ca. 6 mm Kaabli läbimõõt: Min.: 3 mm max.: 9 mm Keskkonnatemperatuur: -40 °C ~ 125 °C Taaskasutatav Materjal: polüester Tulepüsivus: 94V-2, VW-1 Värv: must Pakendi sisu Kaablirüüs
Seda Delocki plaadihoidjat saab kasutada 72 mm laiuste trükkplaatide hoidmiseks, et paigaldada neid 15 mm või 35 mm DIN-ribale. Plaadihoidikut saab individuaalselt lühendada eri pikkustega. Pärast lühendamist saab kaks otsakorki uuesti peale panna. Plaadihoidja (72 mm) DIN-riba jaoks Märkus Delock pakub soovi korral täiendavaid otsakuid. Artikli number: 66064. Spetsifikatsioon Sobib 72 mm laiustele tahvlitele Keskkonnatemperatuur: -10 °C ~ 70 °C DIN-riba paigaldamine: 15 mm ja 35 mm 4 x paigaldusavad Paigaldusavade läbimõõt: 3,5 mm Kruviaugu samm: ca. 70 mm Materjal: plastik Värv: roheline Süsteeminõuded 15 mm või 35 mm DIN-kandaal Pakendi sisu 1 x tahvlihoidja 4 x kruvi 2 x otsakork
