A choice of 4 and 8 port models Self powered operation simplifies installation Mixed PS/2 and AT/ RS232 keyboards and mice supported Easy channel switching from On Screen Display menu, front panel, mouse, optional remote control, RS232 serial or keyboard hot-key Can be used as a rack mount or desktop switch Cascadable to support up to 300 PCs High video quality and screen resolution up to 1900 x 1440 Compatible with all major software including DOS, Windows 3.x/95/98/NT/2000, Linux, Unix and Netware All metal construction KVM switch designed and manufactured in the UK
Mudel vastab OOSA mudelile, kuid selle sõrmeprofiil on soonikuga, mis tagab kindla haarde. Sobib peenteks standardrakendusteks ja täpsustöödeks väikeste komponentide või juhtmetega. Spetsiaalne roostevaba teras, mittemagnetiline, roostekindel, happekindel, kuumakindel. Kasutusvaldkondadeks mikroelektroonika, ehtekunst, kellatehnika, meditsiin ja laboritehnoloogia.
The CATX Displayport Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. TheCAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the AdderView CATx KVM switches and/or Adder extender receivers (either AdderLink X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers arethen all linked to the remote device. Product Codes CATX-DP-USBA; CATX-MDP-USBA Resolutions and cable lengths The maximum resolutions achievable are: 1920 x 1200 x 60Hz at 200m 1280 x 1024 x 60Hz at 300m. Power The CATX DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector Mini DisplayPort version available Some computers, servers and graphics cards (Apple Mac Pro and ATI Radion graphics cards) come with mini DisplayPort connectors as these are smaller than the standard connector. A version of the CAM is available with Mini DisplayPort connectors. EDID display information The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer. USB The CAM supports low speed (1Mb/s) HID USB devices only. Audio 2 channel CD Quality audio is supported via a 3.5mm jack plug. Audio is not available through the display port connector.
The Rack Mount Kit, model ETH-11MK, comes with two metal mounting brackets and mounting screws to mount a compatible 11” wide switch to a standard 19” wide networking equipment rack. Compatible 11” wide switches must have 4 mounting points on each side that are 2 mm apart. Compatible TRENDnet switches include the 16-Port Gigabit GREENnet Switch, model TEG-S16Dg, and the 24-Port Gigabit GREENnet Switch, model TEG-S24Dg.
This compact fiber media converter transforms 1000BASE-T (Copper Gigabit) media to 1000BASE-SX/LX (Fiber) SFP media and vice versa. The 1000BASE-T RJ-45 port supports a full-duplex Gigabit connection at wire speed. The SFP slot supports both multimode (SX) or single-mode (LX) SFP modules.Dual-Speed SFP Slot Dual-speed SFP slot supports both 100 Mbps and 1000 Mbps SFP modules.Power Adapter Included power adapter for standalone use.Compact Small and compact metal housing design provides greater installation flexibility. Network Ports1 x 10/100/1000 Mbps RJ-45 copper port and 1 x 100/1000 Mbps dual-speed SFP slotSwitching Capacity4 Gbps switching capacityJumbo FrameSends larger packets, or jumbo frames (up to 9 KB), for increased performance
The bracket consists of top and bottom panels. Refer to Figure 13. The bottom panel attaches to the wall or ceiling and the top panel secures the access point to the bottom panel.Toote värvValgeSertifikaatAT-TQ2450Kaal1 kgLaius228 mmSügavus160 mmKõrgus44 mm
Twisted Pair Patch kaabel RJ45 pistikutega Cat.6 U/UTP, CCA Integreeritud lõksuvaba pistikupesa lukustuskaitseks Kullatud tihvtid parema juhtivuse ja signaalikao vältimiseks 10-aastane garantii Cat.6 U/UTP CCA võrgukaabel, mis toetab ribalaiust kuni 250MHz ja millel on snagless disain koos kullatud kontaktidega kuni 1GBase-T ethernet standardite jaoks. Cat.6 kaabel töösagedustele kuni 250MHz. Varjestamata versiooni (U/UTP) saab kasutada Gigabit-Etherneti jaoks tänu spetsiaalsele elektrofüüsikaliste parameetrite (NExT, FExT jne) disainile, hoolimata varjestuse puudumisest. Need kaablid on toodetud ja testitud vastavalt ISO/IEC 11801 spetsifikatsioonile. Kaablid on pakendatud ükshaaval polükotti. Kullatud kontaktid tagavad usaldusväärsed ja korrosioonivabad ühendused pika aja jooksul. Vastupidav pingevabastuse konstruktsioon takistab pistiku lukustuse kahjustumist paigaldamise ja eemaldamise ajal. Võrgutehnoloogias kasutatavad kõrgsagedused põhjustavad "nahaefekti" tõttu juhtmete väliskihis suurt voolukoormust, samas kui juhtmete südamikud on ainult väga väikese elektrilise koormusega. See võimaldab kasutada vaskkattega alumiiniumist (CCA) juhtmaterjali, mis muudab selle kaabli kuluefektiivsemaks kui puhtast vasest kaablid. Saadaval on järgmised pikkused: 0,3m, 0,5m, 1m, 2m, 3m, 5m, 7,5m, 10m. Saadaolevad värvid: Hall, sinine, punane, must, valge.
