Wireless Uplink functionality enables wireless connectivity between APs for extended range. One wired UniFi AP uplink supports up to four wireless downlinks on a single operating band, allowing wireless adoption of devices in their default state and real-time changes to network topology.For devices that support Plug & Play Mesh, this functionality is extended to allow multi-hop wireless uplink – so wirelessly uplinked APs can support uplink to other wirelessly uplinked APs.Indoors/Outdoors The UniFi AC Mesh AP includes adjustable dual-band omni antennas, and you have the option to use any 5 GHz omni antenna for spot-beam coverage in high‑density locations with numerous APs and clients, like a conference hall. Expand the limits of Wide-Area WiFi Welcome to UniFi Mesh Technology UniFi creates a highly scalable, end-to-end system of devices spanning multiple locations across theworld — all controlled by a single interface accessed via the Internet or local network.
Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Wireless Router|Available bandwidth 2533 Mbps|IEEE 802.11a/b/g|IEEE 802.11n|IEEE 802.11ac|USB 2.0|USB 3.0|1 WAN|4x10/100/1000M|Antenna Type Omni-Directional|Wireless Frequency Range 2.4 - 5 GHz|Included Accessories Antenna x 4,AC Power Adapter,RJ-45 LAN Cable,Quick Installation Guide|Dimensions 77 x 280 x 169mm Shipping box quantity 4 Unit Brutto Volume 0,009504 cubm Unit Gross Weight 1,65 kg
CRS354-48G-4S+2Q+RM Best price and best performance on the market – this 48 port switch will rock any setup, including 40 Gbps devices!If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product Mikrotik aim to set a new price-performance bar – get more features while spending way less!High-end performance for the masses: more 10G ports and even 40G ports, because speed matters.The 48 port champion you’ve been waiting for– the bargain of the decade!This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices.The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.Included parts
TRM240 is an Industrial LTE Cat 1 Modem with rugged aluminium housing, USB interface and external antenna for better signal coverage. This product is backwards compatible with 3G and 2G technologies and is the most cost-efficient option for upgrading existing industrial and public infrastructure with modern M2M connectivity.Industrial Cellular LTE Cat 1 Modem TRM240 is a compact and simple connectivity device able to provide cellular capabilities to equipment across all market segments. It is backwards compatible to 3G and 2G therefore it is the universal choice when it comes to large scale connectivity upgrades for Industrial or Public infrastructure. It offers long and stable lifecycle important for IIoT projects, because you can use conventional cellular technologies and enjoy more cost-efficient data plans using LTE Cat 1. TRM240 comes with USB interface for power & communication, drivers supporting all relevant platforms and one SMA connector for an external antenna to obtain better signal coverage.
The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost low bandwidth cellular connection it is supported by countless mobile operators around the globe.KNOT can monitor onboard GPIOs convert Modbus protocol to TCP and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes the KNOT brings wireless connectivity to wired sensors such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. Why spend extra money on bandwidth you don’t need? For example you can manage a KNOT-powered vending machine with temperature and liquid sensors with only a few megabytes per day!KNOT features so many protocol support and connectivity options: 2.4 GHz wireless Bluetooth 2x 100 Mbps Ethernet ports with PoE-in and PoE-out Micro-USB. Maximum convenience at the lowest cost! With the Bluetooth interface you can use the KNOT for asset tracking and telemetry based on Bluetooth advertisement packets. KNOT supports any BLE tag that sends advertisement data. iBeacon Eddystone or any other format. It has powerful filters for forwarding only relevant packets and ignoring others.KNOT is a great tool for most outdoor cabinet IoT applications as well. It comes with a DIN rail mount that allows easy integration with all kinds of setups: from agriculture and asset tracking to cold chain monitoring industrial manufacturing and so on.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
The Wireless Wire is a ground breaking solution which offers fiber speed and quality for a fraction of the price. This amazing kit replaces your Gigabit ethernet cable with two small devices that connect to each other over a 60 GHz wireless link.Simply point the included devices at one another and power them on, it will make a 1 Gbit full duplex link to instantly replace your cable - this is why we call it the Wireless Wire! The Wireless Wire makes secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 100 meters or more. The box includes two wAP60G devices that are already paired together, a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors. The link will even work through most windows, depending on their material. The box includes a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors Ethernet test resultsRBwAPG-60ad kitIPQ-4019 1G one port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.2986.1234.9962.21483.0759.3Bridging25 bridge filter rules81.2986.1227.7932.7231.9118.7Routingnone (fast path)81.2986.1234.9962.21489.5762.6Routing25 simple queues81.2986.1234.9962.2375.7192.4Routing25 ip filter rules81.2986.1177.9728.7180.192.2
Boosts wireless signal to previously unreachable or hard-to-wire areas flawlessly Compatible with 802.11 b/g/n and 802.11ac WiFi devices Dual band speeds up to 750Mbps Miniature size and wall-mounted design make it easy to deploy and move flexibly Ethernet port allows the Extender to function as a wireless adapter to connect wired devices
10xSFP28 | 1xConsole | 1x10/100M | Included Accessories IEC cord, IEC cord, K-54 kit, Rack ears for CRS510 | Dimensions 320 x 185 x 44 mm | Unit Net Weight 2 kg
AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)
Switch NETGEAR ProSafe GS105 (5 x 10/100/1000Mbps, Desktop, Auto-sensing per port) Retail Installed Buffer Memory Storage Capacity 128 KB Number of Ports 5 x 10Base-T/100Base-TX/1000Base-T (Ethernet/Fast Ethernet/Gigabit Ethernet) Switching Protocol Ethernet Switching Method Store and Forward MAC Address Table Size 4K Status Indicator Activity Status Networking Compliant Standards IEEE 802.1p(QoS) IEEE 802.3ab IEEE 802.3u IEEE 802.3i Networking Features Auto-sensing per port Device Location External Mounting Capability Desktop Certifications C-Tick, CE Mark, FCC Class B, VCCI Class B Ethernet 10Base-T/100Base-TX/1000Base-T Port Quantity 5 Ethernet 10Base-T/100Base-TX/1000Base-T Port Connector Type RJ-45 Power Device Location External Maximum Power Consumption 3.5 W Depth (mm) 104 mm Height (mm) 28 mm Width (mm) 94 mm Nominal Weight 0.3 kg Package Type Retail Maximum Operating Ambient Temperature 50 °C Maximum Operating Humidity 90 % Minimum Operating Ambient Temperature 0 °C Minimum Operating Humidity 10 % Mean Time Between Failures 1000000 hr Warranty Products Returnable Yes Warranty Term (month) 99999 month(s) Warranty Validation Criteria Serial Number Pack Weight Brutto (kg) 1 kg Pieces in pack 1 Packs in Box 10
CRS106-1C-5S The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power. Low price of this product provides a market leading solution for connecting up to six SFP devices. Switching resultsCRS106-1C-5S ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput10,416.75,333.31,644.76,736.8568.96,909.0SwitchingNon blocking Layer 2 capacity10,416.710,666.71,644.713,473.7568.913,817.9SwitchingNon blocking Layer 1 throughput10,416.77,000.01,644.77,000.0568.97,000.0SwitchingNon blocking Layer 1 capacity10,416.714,000.01,644.714,000.0568.914,000.0
Layer 2 Features Link Aggregation Control Protocol (LACP) 4K VLAN GVRP (GARP VLAN Registration Protocol) Port Isolation STP/RSTP/MSTP IGMP Snooping Quality of Service 4 priority queues Support IEEE 802.1P DSCP QoS Rate limit feature Security Strategies IP-MAC-Port-VID Binding Access Control List (L2~L4 ACL) 802.1x and RADIUS Authentication Support DoS defend Port Security SSL and SSH encryptions Management Web-based GUI Command Line Interface SNMP v1/v2c/v3 RMON (1,2,3,9 group)
SpecificationsOutput Voltage 48 VOutput Rating 0.5A (24W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
300Mbps Wireless N Router 300Mbps wireless speed is ideal for HD streaming, online gaming, and large file downloadsTwo 5dBi antennas greatly increase wireless signal strength, size and stabilityIntuitive webpage guides you through the setup process in minutes. 300 Mbps | IEEE 802.11b | IEEE 802.11g | IEEE 802.11n | Number of antennas 2.
The UniFi® NVR 4 is an enterprise network video recorder that integrates an NVR the UniFi Protect software and a 4-drive bay. The UNVR-4 unifies enterprise-class data protection and scalable storage with simple Plug and Play integration using the intuitive UniFi Protect software. From a desktop computer or mobile device you can access your surveillance recordings from virtually anywhere using the intuitive graphical user interface. The mobile app is available for iOS and Android-based devices. The drive bays are easily accessed from the front panel so hard drive mounting and maintenance are simple. Using four 8 TB drives in a RAID 5 configuration the UNVR-4 can provide up to 30 days of 4k video storage for 15 cameras or Full HD video storage for 50 cameras. Features: (4) 2.5"/3.5" Drive bays (1) 10G SFP+ port (1) Gigabit RJ45 port 1U rackmountable (kit included) Plug and Play UniFi Protect system with NVR Automated secure RAID 1 or RAID 5 configuration Supports USP-RPS for PSU failover
