QuSpot for Teltonika RUT955 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + place to install Teltonika RUT955 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT955 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi and GPS antenna. If you use RUT955 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
10G-Ready 12-port patch panel Cat6A patch panels deliver a steady connection to copper gigabit & 10G switches Shielded design to eliminate EMI and crosstalk Compatible with Cat5e, Cat6 and Cat6A cabling Wall mountable metal housing Color-coded labeling for T568A and T568B wiring schemes 110 IDC type terminal blocks (use 110 or Krone type tool) Use with TRENDnet TC-PDT Punch Down Tool (sold separately) Supports ANSI/EIA/TIA 568-B.2-1, ISO/IEC 11801, and EN50173-1 90° angle type Operating temperature: -25° – 50° C (-13° – 122° F) 2 year warranty TRENDnet’s 12-Port Cat6A Shielded Wall Mount Patch Panel, model TC-P12C6AS, is ideal for gigabit and 10G Copper Ethernet network applications. This patch panel is ideal for use with Cat6A shielded cabling, which is specifically designed to eliminate EMI and crosstalk, ensuring peak performance and data integrity. Cat6A Performance Cat6A cabling allows performance of up to 10Gbps speeds over Cat6A Ethernet cables. Shielded Housing Design Sturdy metal housing design protects against EMI/RFI noise for a more stable connection. Cable Management Integrated cable management cover plate with convenient cable separation for better organization and reduced cable clutter.
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
Set of two separate eXtra Range LTE directional antennas for bi-directional connection to two different LTE base stations. The main antenna has integrated also dualband Wi-Fi GPS Bluetooth antennas and space to install Teltonika RUTX12. The second antenna is only directional LTE XR antenna.The QuMax XR2 a is bi-directional LTE eXtra Range antenna set (two separate antenna) two connect to two different LTE base station (it can also be connected to one base station in order to obtain a greater share of the transfer from that base station). The main antenna additionally has built-in Wi-Fi dual band GPS and Bluetooth antennas 2x Nf connectors for the second LTE antenna and a space to install the RUTX12 router inside antenna enclosure. The second antenna is LTE Extra Range directional antenna only and is in smaller enclosure. The QuMax XR2 set is dedicated to long-range connections from the LTE base station also to two different base stations which gives optimal use of functions such as load balancing and carrier aggregation.
TwistPortTM Adaptor converts 3rd party radio interface into RF elements® male TwistPortTM interface. The radio installation is seamless and requires no tools. The adaptor makes the 3rd party radios compatible with every TwistPortTM antenna with superior performance noise immunity and network scalability.For Mimosa A5xTwistPortTM Adaptor for A5x is compatible with Mimosa A5x radio with a pair of RP-SMA connectors.Market Leading PerformanceThe frequency band of TwistPortTM Adaptors operation is ultra-wide: 5180 - 6400 MHz. Thanks to the extremely low loss of waveguide the maximum power is delivered from the radio to the antenna.
4 x Gigabit PoE+ ports 2 x Gigabit SFP slots 120W PoE power budget 12Gbps switching capacity Forwarding rate: 8.9Mpps (64-byte packet size) Supports jumbo frames up to 10KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately TRENDnet's Industrial Gigabit PoE+ Wall-Mounted Front Access Switch Series is well suited for IP surveillance, IoT, and automation networks for homes and businesses. These hardened industrial gigabit flat switches provide front access to ports and power interfaces for easier installation. The flat and compact size make them ideal for cabinet installations where space is limited. Each hardened industrial front access switch features gigabit PoE+ ports for connecting devices, such as wireless access points, IP cameras, and IoT appliances. These hardened front access switches come equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Wall-Mounted Front Access Switch The wall mountable flat switch provides front access to ports and power interfaces for easier installation. It's flat and compact size make it ideal for cabinet installations where space is limited. PoE+ Power A 120W PoE power budget supplies PoE power from the hardened industrial front access switch to up to eight Power over Ethernet devices. Hardened Industrial Design Equipped with an IP30 rated metal enclosure, this front access switch is designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 4 x Gigabit PoE+ ports, and 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 120W power budget Hardware Design Wall mountable hardware design provides front access to ports and power interfaces for easier installation Compact The flat and compact size is ideal for cabinet installations where space is limited Mounting Hardware Includes DIN-Rail bracket and magnetic wall mount kit Switching Capacity 12Gbps switching capacity Redundant Power Dual power inputs provide redundant power with overload current protection, and an output alarm relay to indicate input power failure. (Power supply sold separately, models: TI-S12048, TI-S24048, and 48VDC3000) Alarm Relay Alarm relay output triggered by power failure of primary or secondary power inputs Jumbo Frames Sends larger packets, or jumbo frames (up to 10KB), for increased performance Wide Temperature Range Hardened industrial housing offers a wide operating temperature range of -40° – 75° C (-40° – 167° F), allowing for installations in extreme hot and cold environments Shock and Vibration Resistant Hardened design rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) for industrial settings Electro Magnetic Compliance Complies with industrial EMS certifications (IEC 61000-4-2) ESD: Contact: 6kV | Air: 8kV, (IEC 61000-4-4) EFT: Power: 2kV | Signal: 2kV, (61000-4-5) Surge: Power: 2kV | Signal: 2kV LED Indicators LED indicators convey power and port status Grounding Point Grounding point protects equipment from external electrical surges
This cable duct by Delock can be used to bundle and conceal exposed cables, to protect them from dirt or damage. Toolless assembly The cable duct is provided with an adhesive tape on the bottom and can therefore be easily and simply attached e.g. to the floor, wall, window frame or baseboard. The adhesive tape also ensures a firm and secure hold. Plenty of space for different cables Depending on the diameter and thickness of the individual cables e.g. antenna cables, HDMI cables, audio cables or power cables can be accommodated. Thus the cables are safely and orderly stowed away. Reusable The upper part of the cable duct can be easily removed by sliding it out to add or remove cables. Specification • self-adhesive • Reusable • Individually shortenable • Environmental temperature: -40 °C ~ 65 °C • Material: PVC • Colour: black • Dimensions (LxWxH): ca. 1000 x 50 x 12 mm Package content • Cable duct
