R11e-5HacD is Mikrotik new 802.11ac card in miniPCI-express format, perfect for any RouterBOARD with miniPCIe slot, such as RB953, RB912, RB922, RB800 or x86 devices with RouterOS.The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
The new DIGITUS® Category 6 Class E, U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6, because of the new red colored connector.Kaabli pikkus0,5 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMust, PunaneKaabli klassESuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7Kasutamistemperatuur (T-T)-20 - 60 °CKaabli värvMustPakendi tüüpPlastkott
Cambium Networks’ ePMP product line has set the standard for high performance, scalability and reliability in harsh interference environments all at a compelling price. The ePMP 3000 is the third generation access point (AP) that carries on the interference tolerance mechanisms from ePMP 2000 but adds the power of Multi-UserMIMO (MU-MIMO). The ePMP 3000 is a 4X4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time. In addition, the ePMP 3000 continues interference mitigation techniques with support of the beam steering antenna for uplink, dynamic filtering for neighboring channel interference, and the robust software from the ePMP product line. The ePMP 3000 AP system consists of the ePMP 3000 AP, a 4X4 sector antenna, optional beam steering antenna and a 25 dBi and 16 dBi subscriber modules. The ePMP 3000 system boasts high packet per second performance, peak throughput of 1.2 Gbps and supporting subscriber modules with 600 Mbps of peak throughput.• Frequency Reuse: Supports GPS synchronization and SM Transmit power control to allow for frequency re- use.• Unmatched Performance and Scalability: With the efficient Cambium Networks MAC protocol and advanced air-fairness scheduler up to 120 simultaneously active subscriber modules can be served without performance degradation.• Industry-Leading Interference Tolerance: The intelligent filtering capability on the receive side makes the ePMP 2000 immune to the effects of strong off-channel interferers and on the transmit side serves to reduce off-channel noise for better radio co-location.• Industry-Leading Spectral Efficiency: MU-MIMO in the downlink doubles the sector capacity by serving two MIMO users at the same time.
Tootja: Lanberg Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5E Lisaandmed: Set of 20 tk of unshielded RJ-45 [8P8C] cat. 5E võrguseade plugs, intended mainly, for UTP LAN kaablid. värv: Transparency
Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 12 V DC, 48 V DC väljundpinge: 12 V DC, 48 V DC Lisaandmed: 8 ports 100Mbps, No PSU in set. Power socket 5,5mm DC
input voltage 9-30 VDC Input connector 12/24 VDC auxiliary power outlet Output connector 4-pin, 3mm pitch Maximum current 2 A Input protection Fuse Cable 2x0.5mm² ,1500 mm LED indicator ✔ RoHS Compliant ✔
CAT5e UTP Patch CableCat 5e Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet technology to 100 meters (328 feet) and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates and work any gigabit speed products. These cables deliver improved performance over standard Cat5 cables.Vention CAT5E UTP Patch Cable is the fully-approved system-standard CAT5E Unshielded Twisted Pair (UTP) cable. CAT5E is completely backward-compatible with current CAT5 equipment. Vention CAT5E cables are composed of 4 pairs 26 AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard. Used to connect your network card to any of the following: 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.
RC10-6U-300GGSTALFLEX's Hanging cabinet is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks local LAN networks all the other devices in non-standard housings and in any complexed Configuration. The new STALFLEX series of rack cabinets is distinguished by an extremely easy and intuitive assembly which definitely simplifies the installation process and makes them uncompetitive to the alternative products offered by other manufacturers!Functionality of the cabinets combined with solid execution of the STALFLEX's team makes this product ideally suited for protection of delicate devices against external factors and accidental mechanical damage.Brokable cable gland.An unquestionable advantage of STALFLEX rack cabinets is an easy-to-break out plug for cabling in their lower and upper part (each with dimensions: 80 mm x 40 mm +/-1/2 mm).This gives various possibilities for cable entry while ensuring convenient wiring installation and easy correct assembly of any devices.Doors easy to assemble.Additional installation comfort is ensured by the easy-to-install door with the option of choosing (right / left). The doors are closed with a patent lock (in the set with a set of two keys).The depth level of front brackets can be adjusted!In order to ensure maximum freedom in arranging the internal space of the cabinet the two front brackets are connected to its body by means of screws.It is a solution that allows mounting the brackets at one of three depth levels (spacing of the mounting holes every 30 mm).Mounting Holes.Holes in the back of the cabinet allow it to be hung with the use of dowels.Specially designed space for convenient assembly of devices.The interior of the cabinet is designed in such a way that after mounting the shelf with the maximum permissible depth there still is free space inside: about 30 mm in its rear part - developed specifically to facilitate the installation of wiring about 60 mm in its front part - to enable safe insertion of eg Ethernet connectors or fiber optics.An additional advantage of the Stalflex rack cabinet is the lack of a back wall which facilitates free use of its internal space.EASY INSTALLATION!The product is intended for self-assembly. By purchasing this product you get a complete assembly kit with the exact instructions and accessories necessary for proper assemble of the cabinet. Thanks to uncomplicated design Stalflex's rack cabinets are extremely easy fast and intuitive to install. Width 10" Height 6U Depth 300 mm Material powder coated steel Package size 335 x 157 x 345 mm External dimensions 300 x 292 x 300 mm
