Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
SAVIO CL-63 Wifi 802.11/n USB adapter/card 150Mbps with antenna, blister 1- 14 transmit/receive channels Maximum transmission power 20dBm LED indicator
DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.* - Mikrotik LtAP mini sold separately!
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: Product spetsifikatsioon:, Category värv: Metal
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: Product spetsifikatsioon:, Category värv: must
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: kollane
The DIGITUS industrial fast Ethernet switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port.It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
4 x Gigabit PoE+ porti 1 x Gigabit-port 1 x SFP-pesa 12 Gbps kommutatsioonivõimsus 65W PoE võimsuse eelarve Toetab 100/1000Base-FX kiudoptilisi SFP-mooduleid Vähendab seadmekulusid, edastades andmeid ja toite üle olemasolevate võrgukaablite IEEE 802.1p QoS ja DSCP läbipääsu tugi Kompaktne seinale paigaldatav metallist korpus Ventilaatorita disain TRENDneti 6-portiline Gigabit PoE+ Switch, mudel TPE-TG611, vähendab seadmete ja paigalduskulusid, edastades andmeid ja toite olemasolevatele Ethernet-kaablitele. See väike SFP-toega võrgukommutaator pakub nelja Gigabit PoE+ porti, mille PoE-võimsuse kogueelarve on 65 W, ühte gigabit-porti ja ühte SFP-pesa kiudoptiliste rakenduste jaoks. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti nii andmete kui ka toite edastamiseks. SFP-toega väike võrgukommutaator võimaldab teil ühendada PoE-seadmeid, näiteks traadita pääsupunkte, IP-kaameraid, VoIP-telefone, IP-videokoodereid, juurdepääsukontrolli ja muud. Lisatud SFP-pesa toetab nii ühemoodilisi kui ka mitmemoodilisi kiudoptilisi SFP-mooduleid pikamaa kiudoptiliste võrgurakenduste jaoks. PoE+ toide SFP-toega väikesel võrgukommutaatoril on 65 W koguvõimsuse PoE-eelarve, mis varustab kuni nelja Power over Ethernet seadet. Gigabit Kuus gigabiti porti pakuvad sellele SFP-toega väikesele võrgukommutaatorile täielikku 12 Gbps lülitusvõimsust servavõrkude paigaldamiseks. Kompaktne disain Kompaktse ja kerge korpuse disainiga kompaktne kommutaator sobib hästi lauaarvutite paigaldamiseks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. Võrgupordid Neli gigabitilist PoE+ porti, üks gigabitiline port ja üks SFP-pesa. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta, kusjuures selle väikese SFP-toega võrgukommutaatori võimsuse eelarve on 65 W. Lülitusvõimsus Selle SFP-toega väikese võrgukommutaatori lülitusvõimsus 12 Gbps Jumbo Frame Saadab suuremaid pakette ehk Jumbo raame (kuni 9KB), et suurendada jõudlust. LED-indikaatorid LED-indikaatorid edastavad pordi olekut Korpus Kompaktne ja väike võrgukommutaator seinale paigaldatava metallkorpusega
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
TRB255TRB255 is an industrial Gateway equipped with a number of Input/Output Serial Ethernet ports and LPWAN modem. With backwards compatibility to EGPRS (2G) network legacy industrial devices can be upgraded for extended use and support of LTE Cat M1 and NB-IoT ensures long lifecycle. Number of all features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.Industrial Gateway TRB255 is equipped with LPWAN modem GNSS receiver Ethernet port durable 16 pin connector block. This Gateway board packs all essential features in one package: secure power connector I/O ports serial communication fast and reliable internet connection for industry applications where long lifecycle option is a must. TRB255 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of hardware and software features such as LTE Cat M1 NB-IoT SMS control Firewall open VPN IPSec RMS user can be ensured that data can be reached securely and without compromises. Without this backward compatibility to EGPRS (2G) networks allows upgrade already working devices and ensures that after 2G network switch off your equipment will be accessible with support of LTE Cat M1 NB-IoT.
16 x Gigabit PoE+ ports 240W PoE power budget 32Gbps switching capacity Hardened IP30 rated metal switch Includes DIN-rail and wall mounts Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm output triggered by power failure Power supply sold separately (models: TI-S24048, TI-S48048) TRENDnet's 16-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG160, has sixteen gigabit PoE+ ports with a 240W PoE power budget. Users are able to connect sixteen PoE+ devices to the industrial PoE switch, while still providing two gigabit ports for additional network connections. The industrial PoE switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. PoE Power A 240W PoE+ power budget supplies up to sixteen Power over Ethernet devices with PoE+ power. Fault Tolerance The industrial PoE switch features redundant power inputs with output alarm relay. Industrial Design Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration and shock, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). PoE+ Power Budget Supplies up to 30W of PoE/PoE+ power per port on the industrial PoE switch with a 240W PoE power budget Network Ports Industrial PoE switch with 16 Gigabit PoE+ ports DIN-Rail/Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware Switching Capacity 32Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately models: TI-S24048 / TI-S48048) Alarm Relay Alarm relay triggered by power failure of primary and/or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB), for increased performance Extreme Temperatures Industrial PoE switch rated for an operating temperature range of -40 – 75° C (-40 – 167° F) Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point on the industrial PoE switch protects equipment from external electrical surges
