LTU-ROCKET Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP) BaseStation radio in LTU™ product family. Operating in the 5 GHz frequency band, the LTU Rocket is a spectrally efficient, noise-resilient PtMP AP specifically designed for wireless ISPs (WISPs).Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades. Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.Primary features of the LTU Rocket include:• 600+ Mbps PtMP performance(1)• Up to 64 client connections per AP(2)• 2+ Million pps• Proprietary RF filtering (1) 1+ Gbps with future firmware upgrade. (2) 255 client connections with future firmware upgrade. Superior PerformanceLTU is a new, proprietary technology with custom silicon and radio design that break through the limitations of 802.11 Wi-Fi technology. This enables LTU to deliver far superior performance over previous airMAX products that are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the ground floor up. Its core communications processing engine enables low latency, long-range capability, DFS flexibility, higher constellations, better power output, and improved receive sensitivity.Seamless CompatibilityThe LTU Rocket is designed to be paired with a variety of Ubiquiti antennas to suit the needs of each installation. The radio includes a mounting bracket that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU Rocket radios with the airPrism® 5 GHz 3x30° HD Sector Antenna for co-location deployments.The LTU Rocket also works with any CPE device in the LTU family, such as the LTU-Pro.
8 x Fast Ethernet porti 1,6 Gbps kommutatsioonivõimsus Edasisaatmiskiirus: (64 baidi suuruste pakettide puhul). Kaitsekindla IP30-klassi metallist lüliti Sisaldab DIN-riba ja seinakinnituse klambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse toiteallika Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-M6024) Ventilaatorita disain tagab vaikse töö
hEX PoE lite is a small five port ethernet router in a plastic case it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port Ethernet ports are shielded. It is affordable small and easy to use. With it’s compact design and clean looks it will fit perfectly into any SOHO environment.
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
The media converter from DIGITUS is the ideal solution for the migration of copper and fiber network signals. From now on, you are able to access the Fiber technology and transfer network signals over several kilometers without renewing your whole network infrastructure.
"Ever Eco Pro 1000 AVR CDS 19" 2U on väga tõhus ja usaldusväärne katkematu toiteallikas (UPS), mis on mõeldud pideva toiteallika tagamiseks ja kriitiliste seadmete kaitsmiseks ootamatute elektrikatkestuste eest. See on kavandatud nii, et see sobib ideaalselt tavalistesse 19-tollistesse serveririiulitesse tänu oma mugavale 2U vormifaktorile, mis võimaldab optimaalset ruumikasutust andmekeskuses või IT-infrastruktuuris. Selle UPSi mudeli võimsus on muljetavaldav 1000VA, mis on piisav paljude kriitiliste seadmete, näiteks serverite, võrguseadmete või tööjaamade toetamiseks. Automaatne pingereguleerimise (AVR) tehnoloogia tagab, et mis tahes sissetulev pinge on reguleeritud ohutule tasemele, vältides võimalikke üle- või alajõe tekitatud kahjustusi. Juhtimis- ja diagnostikasüsteem (CDS) pakub olulisi seirefunktsioone, mis võimaldavad kasutajatel sujuvalt jälgida elektritingimusi ja aku seisundit, tagades, et nad on alati teadlikud süsteemi toimimisest. "Ever Eco Pro 1000 AVR CDS on ideaalne ettevõtetele, kes seavad prioriteediks tõhusa energiakasutuse juhtimise ja seadmete kaitse, ning see on oluline komponent, mis aitab säilitada äritegevuse järjepidevust ja vähendada ootamatutest elektrikatkestustest tingitud andmekaotuse või riistvararikke riski.
• 250 Watt power supply unit • Improved failover of the LANCOM XS-5116QF, LANCOM XS-6128QF, LANCOM GS-4554X, or LANCOM GS-4530X • Hot-swappable – can be inserted during operation • Input voltage: 110 VAC and 230 VAC • Output voltage: 12 V @20 A • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C • Not suitable for operation in ambient temperatures below -40°C and above 70°C
Paindlik, usaldusväärne ja tööstusliku kvaliteediga võrgu kauguspikenduslahendus PLANET IGT-1205AT on tööstuslik Gigabitine Meedia Konverter, mis pakub mitteblokeerivat juhtmekiirust ja suurt paindlikkust Gigabit Etherneti laienduseks karmis tööstuskeskkonnas. See on varustatud ühe 10/100/1000BASE-T RJ45 vaskpordi ja kahe 100/1000/2500BASE-X SFP fiiberoptilise liidesega, mis on IP30 vastupidavas ja tugevas korpuses. IGT-1205AT sobib hästi rakendusteks seiresüsteemi juurutamiseks ning juhtimise ja juhtmevaba teenuse turvamiseks kliimatingimustes nõudlikes keskkondades laias temperatuurivahemikus -40 kuni 75 kraadi C. Kiudoptilise lingi võimalus võimaldab võrgu juurutamist laiendada Kaks SFP-porti ühilduvad 100BASE-FX, 1000BASE-X ja 2500BASE-X SFP (Small Form Factor Pluggable) fiiberoptiliste transiiveritega. Kiudoptiline üleslingi võime tagab läbilaskevõime kõigi võrku ühendatud sõlmede jaoks ja Gigabit Etherneti vahemaad saab pikendada 300 meetrilt (mitmemooduline fiiberoptiline kaabel) kuni 20/40/80/120 kilomeetrini (ühemoodiline fiiberoptika). Fast Etherneti vahemaad saab pikendada 2 km-lt (mitmemoodiline kiudkaabel) 20/40/60 kilomeetrini (ühemoodiline fiiberops). Need sobivad hästi tehase andmekeskustes ja distributsioonides kasutamiseks. Reguleeritav 3-pordiline lülitusreiim või 2-pordiline Fiber Redundant Mode Sisseehitatud DIP-lüliti kaudu saab IGT-1205AT kahte SFP-kiudliidest konfigureerida Etherneti lülitusreiimiks või fiiberliidese reiimiks. Etherneti lülitusreiimiga saab see töötada suure jõudlusega salvestamise ja edastamise mehhanismis; 2-pordilise Fiber-liigendava reiimiga tagab see ülioluliste Etherneti rakenduste jaoks kiire lingi. Üleliigne reiim toetab automaatse taastamise funktsiooni. Kui pakettide sihtport on link-alla, edastab see paketid varupaari teise porti. Keskkonnasõbralik disain IGT-1205AT on varustatud õhukest tüüpi IP30 metallkorpusega, et seda oleks lihtne kasutusele võtta rasketes tööstuslikes nõudlikes keskkondades. IP30 tööstusliku korpuse kaitsega IGT-1205AT pakub kõrgetasemelist häirekindlust elektromagnetiliste häirete ja tugevate elektriliste liigpingete vastu, mida tavaliselt leidub tehase põrandatel või äärekivide külgmistes liiklusjuhtimiskappides. Kuna IGT-1205AT saab töötada temperatuurivahemikus -40 kuni 75 kraadi C, saab seda paigutada peaaegu igasse raskesse keskkonda. IGT-1205AT võimaldab kapiruumi tõhusaks kasutamiseks ka DIN-liistule või seinale kinnitamist. Mugav ja usaldusväärne toitesüsteem Töökindluse ja paindlikkuse suurendamiseks on IGT-1205AT varustatud kahe alalisvoolu sisendpistikuga üleliigse toiteallika paigaldamiseks. See on ka integreeritud toiteallikas laia pingevahemikuga (12–48 V alalisvoolu või 24 V vahelduvvooluga) piisab kõrge kättesaadavusega rakenduste jaoks, mis nõuab kahe- või varutoitesendit.
8 x Gigabit PoE+ ports 2 x Gigabit ports 2 x SFP slots 110W PoE power budget Easy-to-use web-based management interface Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping Extend PoE+ signal up to 656 ft./200m at 10Mbps Front panel 4-digit LED display provides PoE power statistics Surveillance mode GUI for simplified configuration and network monitoring Device discovery for ONVIF compliant IP cameras and NVRs Upload building floorplans to create an E-map of surveillance devices Change IP camera IP address settings Upgrade IP camera firmware Change IP camera administrator user name and password Bandwidth control per port 802.1Q, MAC, Surveillance, and Voice VLAN support IEEE 802.1p QoS with queue scheduling support 24Gbps switching capacity IEEE 802.1p QoS with queue scheduling support TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the installation and management of surveillance networks, especially for integrators and installers. These ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected PoE device. Connect ONVIF compliant IP cameras and NVRs for more advanced capabilities such as changing device IP settings, and to view individual IP camera video within the switch GUI. The Smart Surveillance Switches are also PoE self-healing switches featuring PoE device auto-recovery and power scheduling. Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Gigabit PoE+ Smart Surveillance Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. Available PoE port controls include enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power, available power, and power-per-port. They also support long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart Surveillance Switches also feature SFP slots to support long-distance fiber networking applications. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this ONVIF switch a powerful SMB network solution. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature. Smart Surveillance Management These managed ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device. Integration Flexibility Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration. PoE Device Alive Check PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. Hardware Design Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included PoE Power Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices Surveillance Mode ONVIF switches are optimized for the surveillance industry, proving a graphical dashboard interface with useful information about the switch and each connected device Long Range PoE+ Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps 4-Digit PoE LED Display 4-digit 7-segment LED display to view total power, available power, and power-per-port IPv6 Ready ONVIF switches support IPv6 configuration and IPv6 neighbor discovery Traffic Management Managed switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN, Surveillance VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth management Troubleshooting A convenient cable diagnostic test and traffic statistics aid in network troubleshooting Monitoring RMON, SNMP, and Port Mirroring support administrator monitoring solutions
See Delocki M.2 dokkimisjaam võimaldab paigaldada kaks M.2 PCIe NVMe SSD-d ja seda saab ühendada USB kaudu arvutiga või sülearvutiga. Kaasasolev USB-kaabel võimaldab ühendamist vabasse USB-C™-porti. M.2 PCIe SSD kloonimise funktsioon Kloonimisfunktsioon võimaldab kopeerida ühe SSD sisu teisele ilma arvutit kasutamata. Ideaalne testimisvahend Mälu ühendatakse lihtsalt vastupidavasse korpusesse ja seda saab kohe kasutada. Ei ole vaja kruvisid, tööriistu ega lisaseadmeid, mis tähendab, et SSD-d saab kiiresti vahetada. Spetsifikatsioon - Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane 2 x 67-pinniline M.2 võtme M pesa 1 x USB Type-C™ female (toiteallikas) - Kiibistik: Asmedia ASM2362 - Toetab M.2-mooduleid M- või B+M-klahviga PCIe (NVMe) baasil - Toetab NVM Express (NVMe) - Andmeedastuskiirus kuni 10 Gbps - Toetab UASP - LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta - Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti - Mõõtmed (LxSxK): ca. 72 x 79 x 18 mm - Hot Plug, Plug & Play Toiteallika spetsifikatsioon - Seina toiteallikas - Sisend: AC 100 ~ 240 V / 50 ~ 60 Hz / 0,6 A - Väljund: 5,0 V / 3,0 A Süsteeminõuded - Android 10.0 või uuem - Chrome OS 83.0 või uuem - Linuxi 5.4 või uuem - Mac OS 10.15.6 või uuem - Windows 8.1/8.1-64/10/10-64 - Vaba USB Type-C™ pordiga või vaba Thunderbolt™ 3 pordiga seade Paketi sisu - M.2 dokkimisjaam - Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 45 cm - Kaabel USB-C™ isane USB Type-A isane, pikkus ca. 80 cm (toiteallikas) - Väline toiteallikas - Kasutusjuhend
A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses.
Paigaldamine standard 35mm DIN rööpmel Materjal ABS + PC plastik Kaal 6,5 g Komplektis olevad kruvid Philipsi kruvi #6-32×3/16, 2 tk Mõõtmed 70 mm x 25 mm x 14,5 mm
Paigaldamise tüüp35 mm DIN rööbasMaterjalMust ABS + PC plastik, S235JR terasMõõtmed90 x 70 x 25 mmKaasas kruvidPhilipsi paanipea kruvi #6-32×3/16; 2 tk.DIN 7985 M3 x 5 mm; 2 tkKaal68 g
