Current Sensor (mFi-CS) is a clip-on, alternating current (AC) sensor. It is designed for current monitoring of motors, lighting equipment, industrial hardware, or other AC electrical loads. For use with mFi mPort hardware and mFi Controller software (included with the mFi mPort). Connection Type: mFi RJ45. Input Current: 0-100A.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6 S/FTP PIMFConnecteur avec manchon anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal sans perteGarantie 10 ansCâble réseau S/FTP Cat.6 avec prise en charge de bande passante jusqu'à 250MHz et doté d'un système anti-accroc, avec contacts plaqués or pour les normes Ethernet jusqu'à 1GBase-T.Câble Cat.6 pour fréquences de fonctionnement jusqu'à 250MHz en version blindée avec tresse comme blindage général et blindage pour les paires individuelles (S/FTP). Les câbles de catégorie 6 sont répandus dans tous les secteurs professionnels. Ils sont idéaux pour les applications d'extension Gigabit Ethernet ou AV. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés garantissent des connexions fiables et anticorrosion sur le long terme. La conception robuste et le système anti-accroc évite d'endommager le loquet du connecteur lors de l'installation et de la déconnexion.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
Description This audio adapter by Delock allows the connection of earphones, a headset or speakers with stereo jack to devices with a USB Type-C™ port, such as a smartphone, MacBook or Chromebook. Note The USB Type-C™ interface of the device has to support the output of audio signals (USB ADC specification).
This spiral hose by Delock can be used to bundle exposed cables and protects them from dirt or damage. Simple mounting The delivery content includes a pulling tool, which allows easy threading of the cables. Reusable The cables can be easily added or removed. Multifunctional application The spiral hose can be used in the office or at home, to ensure an orderly and clearly cable installation. Note The spiral hose should be loosened beforehand by first pulling the pulling tool through the hose without cable. The pulling tool can then be pulled through the spiral hose with the cables more easily. Specification • Length: ca. 2.5 m • Diameter: ca. 30 mm • Reusable • Material: PE • Colour: black Package content • Spiral hose • Pull-in tool
Samsung S Pen on praktiline ja mitmekülgne puutepliiats, mis on loodud pakkuma täiendavat mugavust ja funktsionaalsust, olgu siis tegemist märkmete tegemise, joonistamise või seadmete juhtimisega. Selle kompaktne kuju ja kaasaskantav kott teevad sellest ideaalse tööriista hõivatud professionaalidele, kes vajavad mobiilset lahendust, ja loomingulistele entusiastidele, kes soovivad oma ideid kiiresti ja mugavalt visualiseerida. S Pen sobib suurepäraselt inimestele, kes soovivad oma digitaalse kogemuse viia järgmisele tasemele.
Description The antenna cable by Delock is suitable for connecting components of radio frequency technology. Specification • Connectors: 1 x SMA jack bulkhead > 1 x MHF® I plug • Thread length: 10 mm • Impedance: 50 Ohm • Cable: coaxial • Cable type: 1.13 • Cable attenuation: 3.2 dB @ 2.4 GHz per meter • Cable diameter: ca. 1.13 mm • Smallest bending radius: 4.5 mm • Cable colour: grey • Length incl. connectors (L): ca. 50 cm System requirements • Device with one free SMA or MHF® I port Package content • Antenna cable • Nut, toothed washer Package • Zip poly bag
Original part number 560283 Product name Intellinet patch panel 19" 48 ports UTP kat.6 2U Black Producer Intellinet Network Solutions Class of product Patchpanel 19"&10" Number of ports 48 Type of connector RJ45 Category 6 Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information Compatible with both 110 and Krone punch-down toolsSupports 22 to 26 AWG stranded and solid wireFor use with unshielded twisted pair (UTP) Cat6 network cableCat6 compliant to ANSI/TIA/EIA 568 B.2-1Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applicationsFinishing network by RJ-45 portsMeets 19" rackmount standards Height 2 U Width 19 inches Net weight 1.27 kg Colour Black
