Võrguseadmed

Video Resolutions  HD 1920x1080 at distances up to 100 metres/325 feet, 1280 x 1024 at distances up to 300 metres/1000 feet. Extension distance Up to 300 meters/1000 feet using CATx (x=5.5e,6.7). Extension technology Differential analogue signalling for video signals. Cable Equalisation Finely adjustable cable equalisation amplifiers enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units. Integral DeSkew (ADDERLink AV101R only) Skew compensation adjustments can be made using the two rotary dials on the ADDERLink AV101R receiver unit. The first dial affects the relationship between green and blue colour signals, the second red and green. The cable skew is produced due to wire length differences between different twisted pairs in a CATx cable that arise due to the different twist rates used to reduce signalling cross talk. The amount of cable skew seen depends on the cable type used and the cable length. The ADDERLink AV101R provides up to 62ns of DeSkew with a fine 2ns resolution. This means that high-resolution video can be accurately DeSkewed even at long cable distances. The DeSkew supports 300MHz bandwidths, which means that the DeSkew function does not adversely affect the video quality. Indicators The remote and local units are fitted with two indicators, red shows the presence of power into the module, green indicates the presence of a video input. Audio Transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. Rack mount options Both the local (computer-end) and remote (display-end) units may be rack mounted in the ADDERLink AV Series rack mount chassis. The chassis enable 16 units to be mounted in 3U of 19-inch rack space. The units are rack mounted using the optional rack mount faceplate. Connectors (ADDERLink AV100T) 1 x blue 15-pin high-density D-type female connector for video input and 1 x light green 3.5mm audio

AdderLink X100s have been designed for use in applications where keyboard, mouse, high quality video and audio needs to be extended no more than 100m (330ft) over category 5 or higher UTP cable. The AdderLink X100s provide industry-leading video clarity, audio quality and compatibility.Short haul, fully featured, keyboard, video, mouse and optional audio extender for PS/2 and USB computers Industry leading resolutions of 1600 x 1200 are achievable up to 100m (330ft), 1900 x 1440 up to 50m (165ft).The AdderLink X100 applies a high level of signal compensation that allows for a greatly increased range of very smooth and fine adjustmentsUnless an extender actively supports DDC some well-known high performance video cards cannot be used at high resolutions.  The AdderLink X100s fully supports DDCWhen using an X100 pair to extend a CPU with a USB keyboard and mouse interface the X100 will ensure that the keyboard and mouse are continually emulated ensuring maximum and that essential functions such as country code reporting for Sun CPUs is performedThe AdderLink X100s offer their own brightness correction to ensure images are crisp, clear and brightOptional digital stereo audio delivers high fidelity audio for speakers and microphonesTo suit the maximum possible number of applications the X100 is available in a number of models, PS/2 and video (X100-PS2/P) PS/2, video and audio (X100A-PS2/P), USB and video (X100-USB/P) and USB, video and audio (X100A-USB/P)

2.4-5.8GHz Swivel Antenna 4 dBi with cable and u.fl connector

RB911G-5HPnD-QRT, L4 5GHz 802.11a/n, 30dBm, 23dbi Outdoor AP, Gigabit Ethernet

Moxa's terminal servers are equipped with the specialized functions and security features needed to establish reliable terminal connections to a network, and can connect various devices such as terminals, modems, data switches, mainframe computers, and POS devices to make them available to network hosts and process.

Features and Benefits10/100M auto-sensing Ethernet4 serial ports, with support for RS-232, RS-422, and RS-485Built-in 15 KV ESD surge protection for all serial signalsVersatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COMChoice of configuration methods: Web console, Telnet console, and Windows utilitySNMP MIB-II for network management2 KV isolation protection for NPort 5430I/5450I/5450I-T-40 to 75°C operating temperature range (T model)OverviewNetwork Readiness for up to Four Serial DevicesNPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort® device servers, you not only protectyour current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.Independent Operation Mode for Each Serial PortNPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.User-friendly LCD Panel for Easy InstallationAn LCD panel is built into the NPort® 5400’s top panel, with four buttons for inputting data, configuration, and selecting the operation mode. The LCD panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide temperature models.)Dual DC Power InputsNPort® 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power input gives users grea

Our NPort device servers make your serial devices network-ready in an instant. Their compact size makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN.

Features and Benefits Small size for easy installationReal COM/TTY drivers for Windows and LinuxStandard TCP/IP interface and versatile operation modesEasy-to-use Windows utility for configuring multiple device serversBuilt-in 15 KV ESD protection for all serial signalsSNMP MIB-II for network managementConfigure by Telnet or web browserAdjustable termination resistor for RS-485 portsOverviewNPort® 5130 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort® 5130 device servers to give your PC software direct access to serial devices from anywhere on the network.

Features and Benefits Built-in 2-port Ethernet switch for daisy-chain topologiesFree support of Moxa’s push-based Active OPC Server Lite- Seamlessly connect to any SCADA system- Save 80% on network bandwidth- I/O response that’s seven times fasterUser-defined Modbus/TCP addressingI/O peer-to-peer functionMXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIsWeb configuration with Import/Export functionWide temperature models (-40 to 75°C) are available IntroductionDaisy-chained Ethernet I/O ConnectionA new daisy-chained Ethernet I/O concept is now available. The ioLogik E1210 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain.Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remoteI/O ioLogik E1210 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost.Saving Time and Wiring Costs with Peer-to-Peer CommunicationsIn remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik E1200 series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring processand reducing wiring costs.User-definable Modbus/TCP Addressing for Painless Upgrading of Existing SystemsFo

Features and Benefits Built-in 2-port Ethernet switch for daisy-chain topologies Free support of Moxa’s push-based Active OPC Server Lite - Seamlessly connect to any SCADA system - Save 80% on network bandwidth - I/O response that’s seven times faster User-defined Modbus/TCP addressing I/O peer-to-peer function MXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIs Web configuration with Import/Export function Wide temperature models (-40 to 75°C) are available Introduction Daisy-chained Ethernet I/O Connection A new daisy-chained Ethernet I/O concept is now available. The ioLogik E1210 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain. Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remoteI/O ioLogik E1210 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost.Saving Time and Wiring Costs with Peer-to-Peer CommunicationsIn remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik E1200 series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs.User-definable Modbus/TCP Addressing for Painless Upgrading of Existing SystemsFor Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying the configurations. Users need to locate each device’s networking details like I/O channels, or vendor-defined addresses to enable the initial or start address of a SCADA system or PLC. The ioLogik E1200, with user-definable Modbus/TCP addressing, offers greater flexibility, and setup is easy. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs.

Features and Benefits Built-in 2-port Ethernet switch for daisy-chain topologiesFree support of Moxa’s push-based Active OPC Server Lite- Seamlessly connect to any SCADA system- Save 80% on network bandwidth- I/O response that’s seven times fasterUser-defined Modbus/TCP addressingI/O peer-to-peer functionMXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIsWeb configuration with Import/Export functionWide temperature models (-40 to 75°C) are availableIntroductionDaisy-chained Ethernet I/O ConnectionA new daisy-chained Ethernet I/O concept is now available. The ioLogik E1211 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain.Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remote I/O ioLogik E1211 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost.Saving Time and Wiring Costs with Peer-to-Peer CommunicationsIn remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik E1200 series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring processand reducing wiring costs.User-definable Modbus/TCP Addressing for Painless Upgrading of Existing SystemsFo