Original part number 513487 Product name Intellinet patch panel 19" 24 ports STP kat. 5e Black Producer Intellinet Network Solutions Class of product Patchpanel 19"&10" Number of ports 24 Type of connector RJ45 Category 5e Wiring type FTP/STP - shielded 4 twisted-pair cable Additional information UL Listed568 A/B Color Coded Punch Down BlocksSolid and reliable terminations for copper cabling featuring a minimum of 3 mm90 Degree Top-Entry Punch-Down Blocks Compatible with both 110 and Krone punch-down tools Supports 22 to 26 AWG stranded and solid wire Height 1 U Width 19 inches Net weight 2 kg
The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBS10 is compatible with Duplex LC fiber connector types and supports gigabit single-mode fiber connections at distances of up to 10 kilometers (6.2 miles). Fiber Applications Long distance fiber networking for industrial, manufacturing, and corporate / education campus applications. Fiber Mode / Distance Single-Mode transceiver spans distances up to 10km (6.2 miles) and supports up to 1.25Gbps. Compatibility Hot-pluggable with a MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors. Hot-Pluggable SFP Hot-pluggable SFP transceiver compatible with a MSA compliant SFP slot Fiber Wavelength Compatible with single-mode 1310nm transmissions Fiber Distance Supports networking for distances up to 10km (6.2 miles) Fiber Interface LC-type duplex connector Operating Temperature Rated for an operating temperature range of -40°– 85 °C (-40° – 185 °F)
Cambium Networks’ ePMP product line has set the standard for high performance, scalability and reliability in harsh interference environments all at a compelling price. The ePMP 3000 is the third generation access point (AP) that carries on the interference tolerance mechanisms from ePMP 2000 but adds the power of Multi-UserMIMO (MU-MIMO). The ePMP 3000 is a 4X4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time. In addition, the ePMP 3000 continues interference mitigation techniques with support of the beam steering antenna for uplink, dynamic filtering for neighboring channel interference, and the robust software from the ePMP product line. The ePMP 3000 AP system consists of the ePMP 3000 AP, a 4X4 sector antenna, optional beam steering antenna and a 25 dBi and 16 dBi subscriber modules. The ePMP 3000 system boasts high packet per second performance, peak throughput of 1.2 Gbps and supporting subscriber modules with 600 Mbps of peak throughput.• Frequency Reuse: Supports GPS synchronization and SM Transmit power control to allow for frequency re- use.• Unmatched Performance and Scalability: With the efficient Cambium Networks MAC protocol and advanced air-fairness scheduler up to 120 simultaneously active subscriber modules can be served without performance degradation.• Industry-Leading Interference Tolerance: The intelligent filtering capability on the receive side makes the ePMP 2000 immune to the effects of strong off-channel interferers and on the transmit side serves to reduce off-channel noise for better radio co-location.• Industry-Leading Spectral Efficiency: MU-MIMO in the downlink doubles the sector capacity by serving two MIMO users at the same time.
QuMax offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika TRB140 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment.SPECIFICATION: LTE SPECIFICATION FREQUENCYSupported LTE bands 1 2 3 4 5 6 7 8 9 10 12 13 14 17 18 19 20 23 25 26 27 28 33 34 35 36 37 38 39 40 41 44 2305-2360 0.694-0.96 GHz 1.7 - 2.2 GH 2.2 - 2.7 GHz GAIN 4 dBi 5 dBi 6 dBi VSWR
Delock PCI Expressi kaart laiendab teie arvutit kahe välise USB 3.0 pordiga. Saate ühendada USB 3.0 seadmeid nagu nt. dokkimisjaamad, kaardilugejad, välised kõvakettad, hubid jne.
Seda Delocki klemmiplokkide adapterit saab kasutada paljaste juhtmete ühendamiseks. Seega ei ole adapter mugav mitte ainult spetsiaalsetes tööstuslikes rakendustes, vaid ka hobi valdkonnas, nt raudteemudelisatsioonis. Spetsifikatsioon - Liitmikud: 1 x 9-pin D-Sub-istmik 1 x 10-pin klemmiplokk - Pitch: 3,81 mm Pakendi sisu - Adapter
