MF4 4G LTE Mobile WiFi Share your 4G connection with download speeds up to 150Mbps and upload speeds up to 50Mbps Support for FDD and TDD bands Supports up to 11 devices simultaneously (10 wireless + 1 wired) The 2000 mAh battery lasts for 8 hours
Seda Delocki SAS-kaablit saab kasutada Mini SAS HD SFF-8644 pistikuga väliste ketaste ühendamiseks Mini SAS HD SFF-8644 pistikuga kontrolleriga. Spetsifikatsioon - Liitmikud: 1 x Mini SAS HD SFF-8644 isane > 1 x Mini SAS HD SFF-8644 isasühendus - Serial Attached SCSI (SAS) spetsifikatsioon - Kaabli gabariit: 28 AWG - Andmeedastuskiirus kuni 12 Gb/s - Pikkus koos pistikutega: ca 2 m Süsteeminõuded - Vaba Mini SAS HD-liides Pakendi sisu - Mini SAS HD kaabel
This Wireless LAN antenna can be connected to a WLAN device with RP-SMA interface, in order to send and receive signals. Specification • Connector: RP-SMA plug • Frequency range: 2.400 - 2.500 GHz 5.150 - 5.875 GHz • Antenna gain: 5 dBi @ 2.400 - 2.500 GHz 7 dBi @ 5.150 - 5.875 GHz • Impedance: 50 Ohm • Polarisation: linear, vertical • VSWR: 2.5 • Operating temperature: -10 °C ~ 55 °C • Housing material: ABS • Colour: black • Length: ca. 231.50 mm (with tilt joint) ca. 199.20 mm (without tilt joint) • Diameter: ca. 19.70 mm (top) ca. 21.50 mm (max.) ca. 13.15 mm (RP-SMA) System requirements • Device with a free RP-SMA jack Package content • WLAN antenna
Seda Delock SFP+ moodulit saab kasutada 10 gigabitise switchi või meedia konverteri laiendamiseks vaba SFP pesaga optilise kiudliidese kaudu. Spetsifikatsioon • Multi-Mode-Fiber, 850 nm • Kuni 300 m 50/125 µm • LC-duplekspistik • Edastuskiirus kuni 10 Gbit/s • Ühildub SFF-8431-ga • Saab kasutada SFP+-ga ühilduvates 1 gigabitistes switchides • Digitaalse diagnostika seireliidesega (DDM) • Töötemperatuur: 0 kuni +70° C Nõuded süsteemile • Switch vaba SFF-pesaga Pakendi sisu • SFP+ moodul
This converter by Delock enables the connection of a device with USB Type-C™ male to a USB Type-A female port. Specification • Connector: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A male (host) 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female (device) • Chipset: Etron EJ179V • Maximum output current: 1.5 A • Cable diameter: ca. 5 mm • Data transfer rate up to 10 Gbps • Colour: black • Length without connector: ca. 15 cm System requirements • PC or laptop with a free USB Type-A port Package content • USB-C™ converter
Delocki USB-heliadapter laiendab arvutit täiendava helikaardiga. Saab ühendada kõrvaklapid või kõlarid. Heliväljundil on kombineeritud pesa ja seda saab kasutada tavalise analoog stereoväljundina või optilise digitaalväljundina (S/PDIF). Adapter suudab taasesitada helifaile kuni 24 bitti / 96 kHz. Spetsifikatsioon - Ühendused: 1 x USB 2.0 Type-A isane > 1 x 3,5 mm 3-poldiline stereoklemm-liitmik mikrofon 1 x 3,5 mm 3-poldiline stereopesa (analoog) / S/PDIF (digitaalne) kõlar. - Kiibistik: C-Media CM6533 - Funktsionaalsed klahvid: Helitugevus Üles, Helitugevus Alla, Mute - USB audioseadme spetsifikatsioon 1.0 - Kuni 24 Bit / 96 kHz proovivõtusagedus taasesituseks ja 16 Bit / 48 kHz salvestamiseks. - Toetab virtuaalset 7.1-kanalilist heli - USB-vahendi toitevõimega - Plug & Play Süsteeminõuded - Chrome OS 61.0 või uuem versioon - Mac OS 10.9 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64 - PC või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB heliadapter
See Delocki konverter võimaldab ühendada USB Type-C™ isendiga seadme USB Type-A emasportiga. Spetsifikatsioon Liitmik: (USB 3.1 Gen 2) Type-A isane (host): 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A isane (host) 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female (seade) Kiibistik: Etron EJ179V Väljundvool: 1,5 A Andmeedastuskiirus kuni 10 Gbps Värv: must Mõõtmed (LxSxK): ca. 59 x 26 x 13 mm Süsteeminõuded Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu USB-C™ muundur
Description The antenna cable by Delock is suitable for connecting components of radio frequency technology. Specification • Connectors: 1 x SMA jack bulkhead > 1 x MHF® I plug • Thread length: 10 mm • Impedance: 50 Ohm • Cable: coaxial • Cable type: 1.13 • Cable attenuation: 3.2 dB @ 2.4 GHz per meter • Cable diameter: ca. 1.13 mm • Smallest bending radius: 4.5 mm • Cable colour: grey • Length incl. connectors (L): ca. 50 cm System requirements • Device with one free SMA or MHF® I port Package content • Antenna cable • Nut, toothed washer Package • Zip poly bag
See Delocki USB-kaabel võimaldab ühendada USB 3.0 Type-B pistikuga seadme ja vaba USB-pordiga varustatud arvuti või sülearvuti. See on varustatud nii väärika metallkorpusega kui ka kullatud pistikutega. Spetsifikatsioon - Liitmikud: 1 x USB 3.0 Type-A isane > 1 x USB 3.0 Type-B isas - Kaabli gabariit: 28 AWG andmeliini suurus: 28 AWG 24 AWG toiteliin - Paindumiskaitse ristumiskohal - Kaabli läbimõõt: ca 5,5 mm - Vaskjuht - Kontaktid kullatud - Ühendused kullatud punase metallkorpusega - Kaabel topeltvarjestatud - Andmeedastuskiirus kuni: SuperSpeed 5 Gbps, Hi-Speed 480 Mbit/s, Full-Speed 12 Mbit/s, Madala kiirusega 1,5 Mbit/s - Värv: Kaabel: must pistikud: punane - Pikkus koos pistikutega: ca. 1 m Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port - USB 3.0 B-tüüpi liidesega seade Pakendi sisu - USB 3.0 kaabel
Intel Ethernet800 Series improve application efficiency and network performance with innovative and versatile capabilities that optimize high-performance server workloads such as NFV, storage, HPC-AI, and hybrid cloud. With two 25GbE SFP28 ports and key performance optimizations, the E810-XXVDA2 supports solutions across Cloud, Enterprise, and Communications. Performance optimizations for Cloud, Enterprise, and Storage deployments. Application Device Queues (ADQ) provides dedicated traffic queues to reduce latency and increase application throughput. Dynamic Device Personalization enables protocol- specific traffic acceleration to improve packet processing efficiency and reduce CPU overhead. iWARP and RoCEv2 support provides high-speed, low-latency, high-throughput connectivity for storage targets and initiators. Accelerated packet processing for Communications workloads. Enhanced Data Plane Development Kit (DPDK)support increases packet processing speeds. Dynamic Device Personalization enables protocol- specific traffic acceleration and reduces CPU overhead for emerging high-bandwidth workloads. IEEE 1588 PTP v2 support enables precise clock synchronization across 5G RAN deployments. Flexible configurations. Intel Ethernet Optics, and specification-compliant Active Optical Cables and Direct Attach Cables, can support multiple configurations.
The certified LogiLink Cat.6A patch cable is ideal for data transfers up to 10 Gigabit Ethernet and transfer frequencies up to 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
Prepare yourself for Copper Gigabit Ethernet with TRENDnet´s CAT 5e RJ-45 UTP Patch Panels. These patch panels are certified 350Mhz CAT 5e, which are necessary for Copper Gigabit Ethernet. TRENDnet´s 48-port 350 Mhz enhanced CAT 5 Patch Panels are ideal for Ethernet/Fast Ethernet/Gigabit Ethernet (1000Base-T) network applications. Using TRENDnet´s CAT 5e now, will prepare you for more bandwidth in the future without re-cabling your network. Rack mount 48-port Gigabit ready panel Cat5e patch panels deliver a steady 350Mhz connection to copper Gigabit switches Ideal solution for Ethernet, Fast Ethernet and Gigabit applications Use with TRENDnet TC-PDT Punch Down Tool
To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment. The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge voltages caused by lightning strikes. Outdoor Installation of Ethernet Lightning Arrest Box When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.