Original part number NPP-C524-002 Product name Gembird 19" patch panel 24 port 1U cat.5e with rear cable management, black Producer Gembird Class of product Patchpanel 19"&10" Number of ports 24 Type of connector 1 x RJ45 Category 5e Wiring type no data Additional information Termination: 110-typeSpace saving, high-density 19" panel designDesigned to mount to any standard 19" rack or cabinet50µ gold-plated contactsBlack electrostatic powder-coated steelAccommodates top, bottom or side cable entryWrite-on designation label with clear holder on front sideRear cover with wire management bar Height 111 mm Width 483 mm Depth 45 mm Net weight 1.7 kg Colour Black
16 PoE-Plus Gigabit Ethernet Ports, Kabelübertragung und Empfang für 10/100/1000 MBit/s, IEEE-802.3af / at PoE kompatibel zur einfachen Verwendung und Installation, Automatische Erkennung und Schutz von Nicht-Standard-PoE-Geräten
The pair of Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. The pair of Dual Wavelength Single Mode LC Type modules must be used together in order to span distances up to 10km (6.2 miles). Two modules are included, each with 1 x 1000Mbps-LX (LC Simplex -Type) Mini-GBIC connector.Andmeedastuskiirus (maksimaalne)1000 Mbit/sLiidese tüüpSFPFiiberoptiline pistmikLCVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3uSFP-transiiveri tüüpLRKaabli tüüpSingle-modeIsehäälestuvJahKäigultvahetusJahMaksimaalne ülekandekaugus40000 m
TRENDnet’s 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch’s unused SFP slots for copper connectivity. RJ-45 Copper SFP Take advantage of unused SFP slots and repurpose them with RJ-45 copper Ethernet connectivity. Gigabit Speeds 1000BASE-T RJ-45 copper SFP spans distances up to 100m (328 ft.) and supports up to 1.25Gbps. Compatibility Compatible with a MSA compliant SFP slot and 1000BASE-T RJ-45 connections. Ethernet Distance Supports networking distances up to 100m (328 ft.) Connection Interface 1000BASE-T RJ-45 gigabit port Hot-Pluggable SFP Hot-pluggable SFP compatible with a MSA compliant SFP slot Operating Temperature Operating temperature range of 0°– 70 °C (0° – 158 °F)
CAT6A kaabel on muutumas paljude struktureeritud kaabeldusvõrkude valikukaabliks. CAT6A kaabel võimaldab edastada kuni 10 Gbps ja sellest on kiiresti saamas VoIP, CCTV ja andmevõrkude kaabeldustaristu.
Operational superiority - IP67 weather resilient Outdoor Access Point (AP) with 512 max concurrent client associations, 16 SSIDs, WPA-2 encryption, Meshing, Dynamic VLANs, DFS channels, Access control lists (ACL), zero touch provisioning and more – the 802.11ac wave2 powered e700 is perfect for today’s demanding high density outdoor Wi-Fi networks.High performance Wi-Fi - Standards based beamforming, on 5 GHz over a 4x4 Tx/Rx antenna array, can steer beams to the target client device delivering superior performance under high interference RF environments in both downlink and uplink* directions. Enterprise grade controller-less roaming, dynamic channel selection, automatic transmit power control, and more such cnPilot platform features ensure a high grade superior Wi-Fi network.Mesh - Rapidly setup multi-hop mesh networks either dedicating one radio (e.g.: 5 GHz) for mesh backhaul, or using both bands for simultaneous client and mesh access.Wireless Backhaul Integration - Roll out Wi-Fi networks rapidly with Cambium’s wireless backhaul powered from the aux PoE Out port on the e700 eliminating the need for a second power line. The aux PoE Out port can also power an 802.3af camera when security monitoring is needed near the hotspotResilience Dual on-board Active/Standby memory banks ensure higher availability. The e700 can store two versions of the software and if needed fall back to a working operational software, reducing the likelihood of site visits and increasing network up-time.
CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
See Delocki ergonoomilise disainiga pehme hiirematt toimib tänu oma randmetoele leevendavalt hiirega töötamisel. Tänu oma sujuvale täidisele lamab käsipall hiiremattil mugavalt. Spetsifikatsioon Paindlik pehme hiirematt randmetugi Kummeeritud põhi Mõõtmed (LxSxK): ca. 252 x 227 x 20 mm Kaal: ca. 99,5 g Värv: must Pakendi sisu Hiirealus
4 x Gigabit PoE++ porti 2 x SFP-pesa Toetab 1000Base-FX kiudoptilisi SFP-mooduleid 360W PoE võimsuse eelarve Igavene PoE tagab ühendatud seadmetele PoE toite käivitamisel Kiire PoE mäletab pordi kohta ühendatud seadmete PoE võimsuse tarbimist käivitamisel PoE alive check taaskäivitab reageerimata PoE toiteallikaga seadmed 12Gbps lülitusvõimsus Karastatud IP30 klassifikatsiooniga metallist korpus Sisaldab DIN-riba paigalduskinnitust Töötemperatuuri vahemik -40° - 75° C (-40° - 167° F) Toetab LACP, STP/RSTP, VLAN ja IGMP Snooping'i IEEE 802.1p QoS koos järjekorra ajastamise toetusega CLI (konsool / Telnet / SSH), veeb (HTTP / HTTPS), SNMP v1 / 2c / 3 juhtimine 802.1Q / Q-in-Q VLAN ja IGMP Snooping / MLD / MVR tugi 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS tugi Sageduspiirangu kontroll pordi kohta Kaks sisendit tagavad üleliigse voolu kaitsega redundantse võimsuse Alarmiväljund, mis käivitub voolukatkestuse korral Toetab Ethernet Ring Protection Switching (ERPSv2) Toiteplokk müüakse eraldi (mudel: TI-S48048) TRENDneti tööstuslik Gigabit L2+ hallatav DIN-riba lülitite seeria pakub täiustatud 2. kihi hallatavaid funktsioone koos täiustatud liikluskontrolliga, et vastata tänapäeva VKE-võrkude arenevatele nõudmistele. Iga tööstuslik 2. kihi hallatav kommutaator on varustatud IP30 klassifikatsiooniga metallkorpusega, mis on kavandatud taluma suurt vibratsiooni ja lööki, töötades samal ajal laias temperatuurivahemikus -40° - 75° C (-40° - 167° F) tööstuskeskkondades. Meie tööstuslikel 2. kihi juhitavate kommutaatorite mudelitel on vask Gigabiti pordid kiirete seadmete ühendamiseks ja SFP-pesad, mis toetavad 1000Base-FX-mooduleid pikamaa kiudoptilise võrgu rakenduste jaoks. Need tööstuslikud DIN-Raili hallatavad 2. kihi lülitid pakuvad intuitiivset veebipõhist haldusliidest. Iga TRENDneti tööstuslik 2. kihi hallatav kommutaator toetab täiustatud liiklusjuhtimise kontrolli, tõrkeotsingut ja SNMP-seiret. Täiustatud hallatavate kommutaatorite funktsioonide hulka kuuluvad LACP, et grupeerida pordid kokku ja suurendada lülitite vahelist ribalaiust, VLANid virtuaalsete LAN-rühmade segmenteerimiseks ja eraldamiseks, QoS liikluse prioriseerimiseks, portide ribalaiuse kontroll ja SNMP-seire, mis teeb igast TRENDneti tööstuslikust 2. kihi hallatavast kommutaatorist võimsa lahenduse VKE-võrkudele. Sellel tööstuslikul 802.3bt PoE++ kommutaatoril on neli gigabitilist PoE++ porti 360 W PoE-võimsuse eelarvega, lisaks kaks SFP-pesa pikamaa kiudoptiliste rakenduste jaoks. Toetatud täiustatud PoE-tehnoloogia hõlmab Perpetual PoE, Fast PoE ja PoE Alive Check. L2-haldus Pakub hõlpsasti kasutatavat veebihaldusliidest liikluse juhtimise kontrollimiseks, näiteks VLAN, QoS, juurdepääsukontroll, linkide koondamine, tõrkeotsing, SNMP-seire ja portide kaupa MAC-piirangud. PoE võimsus 360 W PoE-võimsuse eelarve varustab kuni kaheksat Power over Ethernet seadet. Omandab täiustatud PoE-portide kontrolli, näiteks PoE lubamine / keelamine, toiteprioriteet, PD alive check ja toiteprotseduuride planeerimine.
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Full Duplex Gigabit speedsConverts a non-PoE Gigabit port to a PoE+ or PoE Gigabit portIntegrated power supplyNetwork distances of up to 100 meters (328 feet)Save on installation and equipment costs
TRENDnet’s professional punch down tool, TC-PDT with 110 and Krone blades, inserts and cuts terminations in one operation. Adjustable high and low actuation setting accommodates termination requirements or user preference. With spare storage that helps prevent blade loss, the precision blades are conveniently interchangeable and reversible between 110 and Krone. The punch down tool offers reliable, easy-to-use operation at an affordable price.Comfortable shape, easy to handleInterchangeable and reversible bladesSafe storage for spare bladeTwist and Lock style holder provides fast, easy blade changes and prevents blade pullout1-year limited warranty
