Võrguseadmed

Twisted Pair Patch Cable with RJ45 connectorsCat.6 F/UTP, CCAIntegrated snagless connector for latch protectionGold plated pins for better conductivity and elimination of signal loss10 year warrantyCat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the "skin effect", while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad aluminium (CCA) conductor material, making this cable more cost-effective than pure copper cables.Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.

Lindy 47283

CAT 5e U-UTP Patchkabel, PVC AWG 26/7, Länge 3 m, Farbe Blau

1m Cat.6 S/FTP LSZH Network Cable, Grey RJ45, M/M, 250MHz, Copper, 26AWG

Kaabel Ethernet LAN LINDY 45603 Must 2 m 1 Ühikut

EFB K5525FGR.10

NETGEAR M4300-96X. Lüliti tüüp: Juhitav, Lüliti kiht: L3. RJ-45 Etherneti ühenduse pesade tüüp: Mitte ühtegi. Püstikmontaaž, Toote kuju: 2U

Câble réseau à paires torsadées avec connecteurs RJ45Cat.6 S/FTP PIMFConnecteur avec manchon anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal sans perteGarantie 10 ansCâble réseau S/FTP Cat.6 avec prise en charge de bande passante jusqu'à 250MHz et doté d'un système anti-accroc, avec contacts plaqués or pour les normes Ethernet jusqu'à 1GBase-T.Câble Cat.6 pour fréquences de fonctionnement jusqu'à 250MHz en version blindée avec tresse comme blindage général et blindage pour les paires individuelles (S/FTP). Les câbles de catégorie 6 sont répandus dans tous les secteurs professionnels. Ils sont idéaux pour les applications d'extension Gigabit Ethernet ou AV. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés garantissent des connexions fiables et anticorrosion sur le long terme. La conception robuste et le système anti-accroc évite d'endommager le loquet du connecteur lors de l'installation et de la déconnexion.Couleurs disponibles: Noir, Bleu, Vert, Gris, Orange, Violet, Rouge, Blanc, Jaune.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

Tootja: LogiLink Tootegrupp: Patchcord võrguseade kaabel Wiring type: 26 pair kaabel pikkus: 20 m Category: 6 Coating type: PVC - polyvinyl chloride 1-ühenduse tüüp: 1 x RJ45 2-ühenduse tüüp: 1 x RJ45 Cross-Over: Ei Boot: non-snag-proof värv: valge Lisaandmed: TIA/EIA 568-B Lisainfo: andmeleht

Embeeded battery: No WEEE tax: No Packing quantity: 1 pc(s) Gross weight: 9.7 kg Gross depth (mm): 200 mm Gross width (mm): 360 mm Gross height (mm): 360 mm Volume (m3): 0.02592 m³ Net weight: 8.7 kg Tare weight (kg): 1 kg Technical features: Packing length: 305±1.5m, Sheath Thickness: 0.55±0.05 mm Producer product name: DS-1LN5E-S Type: Cat 5E, U/UTP Other features: 0.55mm, 305m

The DIGITUS Industrial Gigabit Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit Switch can be used under the most adverse conditions.The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring.The simple plug and play system allows the Industrial Gigabit Switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit Switch is a flexible, cost-effective solution for the industrial environment.

CAT5e UTP Patch CableCat 5e Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet technology to 100 meters (328 feet) and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates and work any gigabit speed products. These cables deliver improved performance over standard Cat5 cables.Vention CAT5E UTP Patch Cable is the fully-approved system-standard CAT5E Unshielded Twisted Pair (UTP) cable. CAT5E is completely backward-compatible with current CAT5 equipment. Vention CAT5E cables are composed of 4 pairs 26 AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard. Used to connect your network card to any of the following: 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.

HG3-CC-S7070° Symmetrical Horn CC Antennas Gen2 Game Changing Sector AntennaSymmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes equipped with N-female connectors. Since 2014 our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection network scalability and throughput improvement.Approved by tens of thousands of installations all around the globe RF elements Symmetrical Horn Carrier Class Antennas are the new standard for fast and sustainable wireless. Unique Beam PerformanceSymmetrical Horn CC Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical. No Side LobesSymmetrical Horn CC Antennas have no side lobes they literally focus energy into one main signal beam. Such behavior saves the most important resource in wireless - the spectrum. Thanks to these unique radiating properties the radio collects and propagates significantly less noise in comparison to current mainstream sector antennas. The problem of noise is directly connected to antenna side lobes - basically an unavoidable feature in most competitive products. Symmetrical Horn TP Antennas behave differently being basically "deaf" outside their main beam. Wideband PerformanceThe radiation pattern of Symmetrical Horn CC Gen2 is frequency independent and its gain is stable over the whole bandwidth of operation. These features make Symmetrical Horn CC Gen2 excellent sector antennas. Excellent Gain Across SpectrumSymmetrical Horn CC Gen2 Antenna covers ultra-wide bandwidth: 5180-6400 MHz! At the same time gain is stable over the whole band. Coverage Without NullMainstream sector antennas have a radiation pattern that is wide in azimuth but flat in elevation plane. If an AP is too high customers that are positioned too close will suffer from low AP signal. Breakthrough ScalabilitySymmetrical Horn CC Gen2 facilitates breakthrough scalability of wireless networks. Unique beam performance and great co-location characteristics allow for higher density sectors compared to traditional sector technology.Symmetrical Horn CC Gen2 features precise main beam widths spanning from 30 to 90 degrees: a range of models suitable for any situation. Ultimate Spectrum Efficiency For EveryoneSymmetrical Horn CC Gen2 antenna supports dense co-location of narrow sectors with excellent isolation. It unlocks the RF performance not possible before. This is an advantage horns have irrespective of radio platform used. N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors used with wide range of Radios. For example mimosaTM Cambium NetworksTM PMP450 LigoWaveTM and many others. Users of UBNTTM Rocket M5 Titanium MikroTikTM connectorized radios (NetBoxTM BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas. Compact SizeSymmetrical Horn CC Gen2 Antenna is compact with only 20-25% footprint of traditional sector antennas. Compact size saves tower rental fees and makes it possible to install Symmetrical Horn CC Gen2 Antenna where regular sectors would not be allowed due to their shape and size. Robust and DurableSymmetrical Horn TP Antennas are solid aluminium bodies that are built to last and to resist any weather conditions. We use only the best materials: die cast stamped and extruded aluminium; high quality ABS plastic high density polyethylene; and stainless steel hardware.

HG3-CC-S8080° Symmetrical Horn CC Antennas Gen2 Game Changing Sector AntennaSymmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes equipped with N-female connectors. Since 2014 our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection network scalability and throughput improvement.Approved by tens of thousands of installations all around the globe RF elements Symmetrical Horn Carrier Class Antennas are the new standard for fast and sustainable wireless. Unique Beam PerformanceSymmetrical Horn CC Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical. No Side LobesSymmetrical Horn CC Antennas have no side lobes they literally focus energy into one main signal beam. Such behavior saves the most important resource in wireless - the spectrum. Thanks to these unique radiating properties the radio collects and propagates significantly less noise in comparison to current mainstream sector antennas. The problem of noise is directly connected to antenna side lobes - basically an unavoidable feature in most competitive products. Symmetrical Horn TP Antennas behave differently being basically "deaf" outside their main beam. Wideband PerformanceThe radiation pattern of Symmetrical Horn CC Gen2 is frequency independent and its gain is stable over the whole bandwidth of operation. These features make Symmetrical Horn CC Gen2 excellent sector antennas. Excellent Gain Across SpectrumSymmetrical Horn CC Gen2 Antenna covers ultra-wide bandwidth: 5180-6400 MHz! At the same time gain is stable over the whole band. Coverage Without NullMainstream sector antennas have a radiation pattern that is wide in azimuth but flat in elevation plane. If an AP is too high customers that are positioned too close will suffer from low AP signal. Breakthrough ScalabilitySymmetrical Horn CC Gen2 facilitates breakthrough scalability of wireless networks. Unique beam performance and great co-location characteristics allow for higher density sectors compared to traditional sector technology.Symmetrical Horn CC Gen2 features precise main beam widths spanning from 30 to 90 degrees: a range of models suitable for any situation. Ultimate Spectrum Efficiency For EveryoneSymmetrical Horn CC Gen2 antenna supports dense co-location of narrow sectors with excellent isolation. It unlocks the RF performance not possible before. This is an advantage horns have irrespective of radio platform used. N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors used with wide range of Radios. For example mimosaTM Cambium NetworksTM PMP450 LigoWaveTM and many others. Users of UBNTTM Rocket M5 Titanium MikroTikTM connectorized radios (NetBoxTM BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas. Compact SizeSymmetrical Horn CC Gen2 Antenna is compact with only 20-25% footprint of traditional sector antennas. Compact size saves tower rental fees and makes it possible to install Symmetrical Horn CC Gen2 Antenna where regular sectors would not be allowed due to their shape and size. Robust and DurableSymmetrical Horn TP Antennas are solid aluminium bodies that are built to last and to resist any weather conditions. We use only the best materials: die cast stamped and extruded aluminium; high quality ABS plastic high density polyethylene; and stainless steel hardware.  

QNAP LAN QNA-T310G1S 1x10GbE SFP+

Environmentally Hardened Design PLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-5225-8P2T2S, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-5225-8P2T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-5225-8P2T2S can be placed in almost any difficult environment. The IGS-5225-8P2T2S also allows either DIN rail or wall mounting for efficient use of cabinet space. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-8P2T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-5225-8P2T2S provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat5E/6 Ethernet cable. As the whole system comes with a total 240-watt PoE budget, the IGS-5225-8P2T2S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras and other PoE network devices, doubling that of the current conventional 802.3af PoE. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-8P2T2S’ GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI. Intelligent Alive Check for Powered Device The IGS-5225-8P2T2S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-8P2T2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-5225-8P2T2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-5225-8P2T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-5225-8P2T2S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Digital Input and Digital Output for External Alarm The IGS-5225-8P2T2S supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-8P2T2S port shows link down, link up or power failure. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-8P2T2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-8P2T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-8P2T2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-8P2T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-8P2T2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-8P2T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-8P2T2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225-8P2T2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-8P2T2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-8P2T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-8P2T2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Industrial Area Department/Workgroup PoE Switch Providing up to 8 PoE+, in-line power interfaces, the IGS-5225-8P2T2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-8P2T2S makes the installation of IP cameras or wireless AP easier and more efficient.

Dual Monitor DisplayPort™ 1.2 KVM 3.5mm speaker and microphone connections Designed for use with Dual DisplayPort systems Supports 4K UHD resolutions up to 3840 x 2160 @ 60Hz Up to 2560 x 1440 @ 144Hz 2-Port USB 2.0 hub for storage devices and printers Required cabling sold separately (TK-CP06) No CD installation required TRENDnet's 4-Port Dual Monitor DisplayPort KVM Switch, model TK-440DP, allows you to control four computers with one set of console controls. Experience up to 4K UHD resolutions, no driver installation required. The TK-440DP is designed for dual monitor systems with USB mouse and keyboard connections, and features a two-port USB hub to share storage devices or printers between computers. Dual Monitor Designed to connect to two DisplayPort monitors. 4K UHD Resolution Supports resolutions up to 4K UHD (3840 x 2160 @ 60Hz). USB 2.0 Hub Two additional USB ports to connect storage drives and printers. 4-Port Dual Monitor KVM Control up to four computers with dual monitor support DisplayPort Monitor Designed to connect to two DisplayPort monitors 4K UHD Supports resolutions up to 4K UHD (3840 x 2160 @ 60Hz) Audio Support Full audio support maximizes work station productivity USB Mouse & Keyboard True Transparent USB (TTU) emulation technology supports most keyboard and mouse designs Housing Rugged metal enclosure USB 2.0 Hub Two additional USB ports to connect storage drives and printers Hot Keys Hot Key command shortcuts Easy Installation Simple setup with driverless installation

Võrgukaart Intel AX201

ALLNET L2 Haldatav Lüliti 54p • 48x 1GbE PoE 800W • 6x SFP+ • Rack 19" • Mudel: ALL-SG8454PM-10G

The Aruba CX 6100 Switch Series is a modern family of entry level access switches ideal for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications.Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements.

EFB K5510.15, RJ45, 4 m

TRENDneti TK-C15 15-jalasel KVM kaablil on kõik pistikud, mida vajad klaviatuuri, monitori ja hiire ühendamiseks ning võimaldab sul viia kõik need seadmed KVM switchist, süle- või lauaarvutist kuni 15 jala kaugusele. Koos TRENDneti TK-200 2 pordiga, TK-400 4 pordiga ja TK-801R 8 pordiga KVM switchiga oled teinud parima valiku mitme PC haldamiseks vaid ühe klaviatuuri, monitori ja hiire abil.Pikkus: 4,5 m, Kõrgekvaliteediline KVM kaabel (UL2919 VGA monitori jaoks).Klaviatuur & hiir: PS/2 tüüpi 6 pi