Hama Cat 6A võrgukaabel pakub ülikiiret andmeedastust kiirusega kuni 10 Gbit/s. Kaabel on S/FTP varjestatud, mis tagab usaldusväärse ja stabiilse ühenduse ka kõige nõudlikumates võrgukeskkondades. See kaabel on ideaalne valik kiire ja turvalise võrguühenduse loomiseks. • Cat 6A standard, kiirus kuni 10 Gbit/s • S/FTP varjestus maksimaalse häirekaitse jaoks • Usaldusväärne ja stabiilne võrguühendus • Kvaliteetne ja vastupidav disain
AirMax Omni is a Carrier Class omnidirectional antenna that was designed to seamlessly integrate with Rocket M radios (sold separately).Rocket M combines the “brains” in one robust unit, pair Rocket M with AirMax Omni to create powerful 360? omnidirectional coverage. This seamless integration gives network architects unparalleled flexibility and convenience.Rocket Mount Included. AirMax Omni antennas all come with a universal Rocket M mount for easy installation.RF Cables Included. Rugged, weatherproof RF cables are included with AirMax Omni antennas.
High power 2192-2732MHz 802.11b/g/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-PoE device power requirements. The included 2 and 2.5 mm jumper cables increase power pin device compatibility. PerformancePoE Compatible with PoE (802.3af ) network connectionsGigabit Ethernet Supports Gigabit network speedsAdjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-PoE device power requirementsJumper Cables The included 2 and 2.5 mm jumper cables increase power pin device compatibility with the non-PoE networked deviceNo Power Adapter The TPE-104GS is powered by the PoE connectionMounting Built-in mounting points increase installation flexibility
TRENDnet’s TI-PG62B is a reliable IP30 unmanaged hardened DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, two dedicated SFP slots and a 12 Gbps switching capacity. Dual redundant 12 – 56 VDC power inputs and a power failure alarm relay.PoE PowerA 60 – 120 W PoE+ power budget supplies up to four Power over Ethernet devices.Fault Tolerance Features dual redundant 12 – 56 VDC power inputs with output alarm relay.Industrial Hardened DesignEquipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). Network Ports 4 x Gigabit PoE+ ports and 2 x dedicated SFP slotsDIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardwareSwitching Capacity 12 Gbps switching capacityRedundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048)Alarm Relay Alarm relay triggered by power failure of primary and/or redundant powerJumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performanceExtreme Temperatures Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F)Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)Grounding Point Grounding point protects equipment from external electrical surges
Cat.6A U/FTP flat network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat 6A cable, for operating frequencies up to 500MHz, shielded with foil shielded with single pair shielding (U/FTP). Designed as flat ribbon cable for use in environments with restricted or limited installation space. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.Available lengths: 0.3m, 1m, 2m, 3m, 5m, 10m.Available colours: Black, White.
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: boot for RJ45 plug Wiring type: ei puuduta Lisaandmed: bag of 100 pieces värv: valge
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: boot for RJ45 plug Wiring type: ei puuduta Lisaandmed: bag of 100tk värv: must kõrgus: andmed puuduvad laius: andmed puuduvad pikkus: andmed puuduvad
QuMax MIMO 4x4 directional LTE antenna (4x SMA connector for 2x embedded LTE modems) for Teltonika RUTX12 router is a perfect outdoor device for mobile and fixed installations like industrial CCTV hotspots etc. It also has embedded Wi-Fi dual band 2.4 & 5 GHz omni antenna GPS antenna and Bluetooth antenna. It is designed to have Teltonika RUTX12 router installed inside IP67 enclosure. If you use RUTX12 with QuMax antenna you get an integrated complete solution with embedded router and multi band antennas in one enclosure.