Tootja: Lanberg Tootegrupp: Complete outlet Type of ühenduspesa: 1 x RJ45 ports: 1 Wiring type: UTP - unschielded twisted pair kaabel, 4 pairs, CAT5E Category: 5e kasutusvaldkond: on wall/surface mounted Lisaandmed: Allows connection of conductors 26-22 AWG, universaalne IDC/LSA Ühendusi in accordance koos T568A/B laius: 0 mm kõrgus: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: valge
Build and expand your network with the Ubiquiti® UniFi® Switch XG 6POE, model US-XG-6POE. It is a fully managed, 6-port, 10G switch with 802.3bt PoE++. For deployment versatility, four 10G RJ45 ports offer 802.3bt PoE++ for powering devices, and two SFP+ ports are designed for high‑capacity fiber uplinks.Switching PerformanceThe UniFi Switch XG 6POE offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The switch features a total non-blocking throughput of up to 60 GbpsModel: US-XG-6POE• (4) 100/1000 Mbps and 2.5/5/10G RJ45 Ports• (2) 1/10 SFP+ Ports• (4) 802.bt PoE++ Ports• Non‑Blocking Throughput: 60 Gbps• Switching Capacity: 120 Gbps• Forwarding Rate: 89.3 Mpps
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
XQ+31LC02D A QSFP28 module for distances up to 2km in your 100 Gigabit setups. 1271, 1291, 1311, 1331 nm The MikroTik 100 Gigabit product line keeps growing! Add this QSFP module for distances up to 2km to your CCR2216 or CRS504 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions, including optical power monitoring, and will perform well in environments up to 70° C. It has been designed to meet the harshest conditions, including temperature, humidity, and EMI interference, so we definitely recommend this as a reliable solution for all your 100 Gbps QSFP28 devices.
TRB160 on ülimalt väike, kerge ja energiatõhus IoT-värav, mis on varustatud kriitilise tähtsusega LTE Cat 6, Gigabit Ethernet ja USB Type-C kaudu virtuaalse võrguliidesega, mis võimaldab samaaegselt toite ja võrguandmeid edastada. See IoT-värav suudab saavutada kuni 300 Mbit/s mobiilside kiiruse koos operaatoragregeerimisega paljudes rakendustes ja toetab mitmesuguseid tööstusklassi protokolle M2M-side jaoks.LTE CAT 6Kuni 300 Mbit/s mobiilikiirus koos operaatoragregeerimisegaUSB TYPE-CSamaaegseks toiteallikaks ja võrguandmete edastamiseksPROTOKOLLIDOPC UA, Modbus, Data to Server, MQTT, DNP3, DLMS ja muud.KOMPAKTSUSVäike suurus, lihtne paigaldus
The most commonly used standard connector for "twisted pair" cables (UTP, STP, etc. type). The body is made of durable transparent plastic. Metal blades.
Using airMAX M5 technology, the IsoStation M5 supports up to 100+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation M5 comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation M5 for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Attached cable management panel ensures easy stability of installation. - 24 unshielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Attached cable management panel. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 48 Type of ühenduspesa: 48 x RJ-45 Category: 6 Wiring type: CAT6, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbered fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: must
Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
A pair of industrial temperature grade (-40°C to +85°C) modules for 80km links, includes one S-45LC80D and one S-54LC80D. SFP module S-45LC80D: 1.25G, SM, 80km, T1490nm/R1550nm, LC-connector, DDM. SFP module S-54LC80D: 1.25G, SM, 80km, T1550nm/R1490nm, LC-connector, DDM. Compatible with all MikroTik products, that have SFP or SFP+ cages.
Wireless Router, Available bandwidth 1200 Mbps, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 1 WAN, 4x10/100M, 64, 128-bit WEP, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, DHCP, Number of antennas 4, Wireless Frequency Range 2.4GHz and 5GHz, Windows 10, Windows 8, Windows 7, Linux, MacOS, Windows XP, Windows Vista, Power supply requirements 9VDC / 0.85A, Dimensions 229.87 x 144.19 x 36.85 mm
