Deploy the UniFi XG AP in very high-density environments requiring maximum wireless performance. The UniFi XG AP features simultaneous dual-band 4x4 MU-MIMO technology and convenient 802.3bt PoE compatibility.10G and 1G Ethernet Connectivity Designed to be a 10G Ethernet backhaul the primary port carries both data and PoE while the secondary Gigabit Ethernet port is for bridging and also supports PoE input.Features: 10 Gigabit Ethernet Support4x4 MU-MIMO Quad-Radio: (3) client 1 SecurityDual 5 GHz 802.11ac Wave 2 Radios3.466 Gbps Combined Radio Rate in 5 GHz800 Mbps Radio Rate in 2.4 GHzDedicated Security Radio with Persistent Threat Management1 500 Client Association Limit
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.It also has a designated space for an ISP sticker on the front. Sticker size: 6,6 x 2,54 cm.GPEN11 can be mounted inside customer premises, next to the WiFi router which provides the connectivity to the users. The GPEN11 itself will then power the ISP router, whether a outdoor wireless unit mounted on a roof, or the network switch. The GPEN unit can be securely attached to a wall, or communications cabinet. The ethernet cable can be routed either directly through it’s bottom cable opening, or into the wall, as preferred. The GPEN family of products includes switches with outdoor enclosures, which support powering from PoE sources, such as the GPEN11 injector. A basic setup inside customer premisis to provide the Internet connection. Power adapter is not included in the package.
The AmpliFi Instant Wi-Fi System includes a router with an easy-to-use touchscreen display, 1 Gigabit Ethernet port, a WAN port, an Ethernet cable, and one MeshPoint with an Ethernet port to maximize coverage and eliminate dead zones in your home. The AmpliFi Instant Wi-Fi system provides superior coverage with a range of up to 4,000 sq. ft and quick setup for whole home coverage with seamless Wi-Fi.
Tootja: iTec Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1 x RJ45 2-ühenduse tüüp: 1x male USB C-type värv: Space Gray Lisaandmed: 1x USB-C 3.1 ühenduspesa, for connecting to a laptop, tablet või PC, 1x Ethernet GLAN RJ-45 port toetab 10 / 100 / 1000 Mbps speeds, toetab Wake-on-LAN, Jumbo frame Kuni 9k bytes, detection of kaabel crossover, tugi IEEE 802.3az (Energy Efficient Ethernet, IPv4/IPv6 pack Checksum Offload Engine (COE) to punaneuce CPU loading, kiibistik Realtek RTL8153, Powered through USB bus, no power adapter is needed, OS Lisainfo: i-tec USB-C Metal Gigabit Ethernet Adapter
Attach it to the back of the SXTsq using a Ph1 screwdriver, mount everything on a pole using the provided U bolt and an 8 mm ratchet, then place the bolt in one of the three positions - these enable fine adjustments up to 45 degrees in both directions!
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
Dual Band WiFi 6 Speeds up to 1800 Mbps – 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz. Seamless Roaming with One Unified Network – Halo units work together to automatically switch between Halos as you move around your home with a single unified WiFi name and password. Whole Home Coverage – Blanket up to 6,000 ft² (550 m²) with high-speed WiFi, eliminating WiFi dead zones at your home. Connect over 150 Devices – Provide fast and stable connections over 150 devices. Easily Manage Your Home Network – Use the MERCUSYS App to quickly set up and manage your WiFi. You can also manage your kids’ online time and contents.
Original part number PLW1000-100PES Product name Netgear Powerline 1000Mbps AC650 1PT GbE Adapters Bundel + WiFi (PLW1000) Producer Netgear Class of product HomePlug adapter Communication ports 10/100/1000 Base-T (RJ45) Supported protocols and standards IEEE 802.11acIEEE 802.11bIEEE 802.11gIEEE 802.11nIEEE 1901IEEE 802.3 Supported operation systems Windows 7Windows 8Windows XPMac OS X Standard accessory 2 x Ethernet cableInstallation Manual Colour White Width 121 mm100 mm Height 87 mm59 mm Depth 38 mm35.9 mm Net weight 266 g126 g Additional information Set include PLW100 Access Poin and PL1000 More info Specification [LINK]
Naudi sujuvat 4K voogedastust ja allalaadimist superkiire 1,8 Gbps Wi-Fi kiirusega. Täiustatud algoritmid, kiirendustehnoloogia ja kõrgjõudlusega antennid parandavad Wi-Fi katvust. Järgmise põlvkonna platvorm tagab kiire ja stabiilse Wi-Fi, samal ajal vähendades energiatarvet. Lapsevanemate kontrollimise funktsioonid pakuvad mitmekülgseid võimalusi, sh URLi blokeerimine ja profiili haldamine. • Superkiire 1,8 Gbps Wi-Fi • Järgmise põlvkonna platvorm • Lapsevanemate kontroll • Ühildub enamiku ISP-dega • OneMesh tugi • Lihtne seadistamine
TUF Gaming AX6000 Dual Band WiFi 6 Gaming Router with dedicated Gaming Port, Dual 2.5G Port, 3steps port forwarding, AiMesh for mesh WiFi, AiProtection Pro network security and AURA RGB lighting. Ultrafast WiFi 6 – Ultra WiFi speed up to 6000 Mbps and 4X network efficiency. Dual 2.5G Ports – Dual 2.5G ports with flexible WAN/LAN port configuration. Fast & Stable Wired Gaming – Dedicated gaming port to prioritize connected gaming device . ASUS AiMesh Support – Support AiMesh to create a whole-home mesh network. Tested Durability and Stable Operation – TUF Gaming AX6000 is built to be durable and undergoes verified testing to ensure reliable, stable operation. TUF Gaming AX6000 (TUF-AX6000) Wireless Router, Available bandwidth 6000 Mbps Mesh, Wi-Fi 5 Wi-Fi 6, IEEE 802.11a IEEE 802.11b, IEEE 802.11g IEEE 802.11n, USB 3.2 4x10/100/1000M, 1x2.5GbE Number of antennas 6, Wireless Frequency Range 2.4GHz / 5GHz Activity, Link Power, Included Accessories RJ-45 cable,Power adapter,Quick Start Guide,Warranty card Colour Black
Improved Noise ImmunityThe NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noiseimmunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.Innovative Mechanical Design• Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt.• Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole.• Easy removal The antenna feed can be detached with the push of a button.Corrosion Resistance• Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
R1200 AC1200 Dual Band Smart WiFi Router AC1200 Dual Band WiFi Router 5dBi high gain antennas for large house coverage Built-in Firewall will protect your home network The guest network will protect your privacy Support VPN Clients: PPTP/L2TP/OpenVPN/WireGuard IPv6 compatible Easily encrypt your wireless security with the push of a WPS button
The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product). - SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - SXTsq Lite5 (International) supports 5150MHz-5875MHz range.Included Parts Wireless specifications5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s25-9631654MBit/s20-80100MCS025-96316MCS719-7579
