CRS317-1G-16S+RM The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. CRS317-1G-16S+RM is powered by a next generation switching chip giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.The unit has dual redundant power supplies and passive cooling case so it’s completely silent - for hot environments two redundant fans will automatically keep the system cool if needed.It gives you all the basic functionality for a managed switch plus more: allows to manage port-to-port forwarding apply MAC filter configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features Boot option for SwOS or RouterOS • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation • Port security • Web-based GUI • 800 Mhz CPU • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Link Aggregation (LACP) • Access Control List • MikroTik neighbour discovery • SNMP v2/v3 • rackmount and tabletop Switching results CRS317-1G-16S+RM Mode Configuration 64 byte 512 byte 1518 byte kpps Mbps kpps Mbps kpps Mbps Switching Non blocking Layer 2 throughput 239 583.3 122 666.7 37 828.9 154 947.4 13 085.2 158 906.4 Switching Non blocking Layer 2 capacity 239 583.3 245 333.3 37 828.9 309 894.7 13 085.2 317 812.7 Switching Non blocking Layer 1 throughput 239 583.3 161 000.0 37 828.9 161 000.0 13 085.2 161 000.0 Switching Non blocking Layer 1 capacity 239 583.3 322 000.0 37 828.9 322 000.0 13 085.2 322 000.0
Stable mobile Internet in all conditionsThe 5G directional antenna with 9dBi gain has been designed to improve the quality and stability of the mobile network signal. Thanks to its directional radiation pattern, the antenna concentrates energy in a selected direction, allowing it to precisely "target" the base station and achieve significantly better connection parameters than omnidirectional antennas. The wide operating range of 600-2700MHz covers the most important LTE bands used in Poland and Europe, including B28, B20, B3, B1 and B7, ensuring high compatibility with stationary and industrial routers as well as IoT devices. The additional 33003800 MHz range enables operation in modern 5G NR (n77/n78) networks, offering higher bandwidth and better transmission stability.Excellent performance and weather resistanceThe 5G antenna is designed to improve the quality of your internet connection at home, in the office, and in any other room with internet access. It increases transmission stability, improves download and upload speeds, and has a positive effect on overall internet performance. IP67 rating, combined with resistance to various weather conditions, can ensure connection stability even in difficult weather conditions.Our solution offers:- 5G standard support transmission speeds up to 600 Mbps,- a wide frequency range of 600-2700 MHz and 3300-3800 MHz,- SMA connector ensures compatibility with popular LTE devices: routers, mobile Internet gateways, USB modems,- modern design thanks to the use of high-quality materials and attention to detail,- 3-metre cable, allowing for convenient antenna installation.
Discover the full potential of your networkA reliable and efficient network device that will allow you to split the Ethernet signal into 4 outputs at a transmission speed of 1000 Mb/s. The device will provide you with a stable and fast connection and smooth data transmission over a distance of up to 100 meters. This functionality allows you to uniquely expand the possibilities of using and enjoying your multimedia system, without the need for additional complex solutions or costly investments In additional equipment. Now you can enjoy your favorite movies, video games or presentations on several receivers at the same time.Robust metal construction, advanced features and ease of useDiscover new possibilities with a Qoltec device that offers: Signal distance up to 100m, Equipped with 5 RJ45 ports (1 x Input, 4x Output) Data rates up to 1Gb/s, Aluminium housing, gold-plated connectors and reinforced PCB, No plug&play installation and configuration required, Works with CAT 5, 5e, 6, 7 ,8 network cables, Compatibility with devices such as routers, switches, set-top boxes, TVs, ADSL, Starlink. Expand your multimedia capabilities in just minutesOur device offers instant and hassle-free installation, thanks to plug&play technology, Which does not require additional configuration and technical expertise. You only need to follow a few simple steps. First, Connect devices to the appropriate RJ45 ports using appropriate network cables, e.g. Cat5, Cat5e, Cat6, Cat7 or Cat8 and then connect one of the ports to your router or access modem. Make sure the LED's on the switch indicate activity on the ports.
The Kolink PCIe 5.0 x16 riser cable with 90° angle in detail This cable allows you to strategically extend the PCI Express x16 slot present on a motherboard. With backward compatibility to previous PCIe generations and most Kolink cases, this cable effortlessly connects your graphics card and motherboard with transfer speeds of up to 32 GT/s. Even in modding projects or in cases that deviate from the common ATX standard, it may be necessary or practical to place PCI Express expansion cards in unusual positions. The outer material is made of TPE and has flexible segments that facilitate gentle bends. A particular advantage of a riser cable is the ability to position graphics cards vertically, for example, and thus mount them parallel to the motherboard. This allows the card’s cooler to be fully showcased.
Der Digitus DN-80112-2 unmanaged Switch mit 16 Ports RJ45 Ports ist eine fortschrittliche Netzwerk-Lösung, die den anspruchsvollen Anforderungen von kleinen bis mittelgroßen Unternehmen gerecht wird. Dieser leistungsstarke Switch bietet ein nahtloses und sicheres Netzwerkerlebnis und gewährleistet zuverlässige und effiziente Datenübertragung in Ihrer Netzwerkinfrastruktur. Mit robusten Funktionen und überlegener Technologie ist der DN-80112-2 die perfekte Ergänzung für jedes moderne Netzwerk.
Der Digitus DN-80113-2 unmanaged Switch mit 24 RJ45 Ports ist eine fortschrittliche Netzwerk-Lösung, die den anspruchsvollen Anforderungen von kleinen bis mittelgroßen Unternehmen gerecht wird. Dieser leistungsstarke Switch bietet ein nahtloses und sicheres Netzwerkerlebnis und gewährleistet zuverlässige und effiziente Datenübertragung in Ihrer Netzwerkinfrastruktur. Mit robusten Funktionen und überlegener Technologie ist der DN-80113-2 die perfekte Ergänzung für jedes moderne Netzwerk.
Hikvision DS-3E0310HP-E on Hikvisioni Pro-seeria võrguseadmete hulka kuuluv 8-portiline Power over Ethernet (PoE) kommutaator. See on mõeldud nii toite- kui ka võrguühenduse pakkumiseks ühe kaabli kaudu PoE-toega seadmetele nagu IP-kaamerad VoIP-telefonid ja traadita pääsupunktid. See lüliti sobib eriti hästi kasutamiseks IP-valvesüsteemides kus on vaja pikamaa-kaabliühendusi. Peamised omadused: [ul] [li]Intelligentne PoE-haldus[/li] [li]Kuni 300 m pikkune PoE-ülekanne[/li] [li]IEEE 802.3bt standard Hi-PoE Max. 90 W ühe pordi jaoks[/li] [li]4/8-tuumaline adaptiivne toiteallikas väiksema energiakaduga[/li] [li]6KV ülepingekaitse et parandada töökindlust karmides tingimustes[/li] [/ul] Sellel kommutaatoril on kaheksa Fast Ethernet PoE porti ja kaks täiendavat Gigabit RJ45 porti. Lüliti esimene port toetab IEEE 802.3bt standardi kohast High-Power over Ethernet (Hi-PoE) mis suudab anda kuni 90 vatti mistõttu sobib see suurema võimsust nõudvate seadmete näiteks PTZ-kaamerate toiteks. Teised pordid pakuvad standardset PoE-toite kuni 30 vatti ühe pordi kohta nii et kogu PoE-toite eelarve on 110 vatti. DS-3E0310HP-E üks märkimisväärseid omadusi on selle PoE-ülekande kaugkasutamise võime mis võimaldab kuni 300 meetri ulatuses andmete ja toite ülekannet mis on oluliselt suurem kui standardse Ethernet-kaabli puhul. See omadus on eriti kasulik suuremahulistes paigaldustes kus seadmed on laiali suurtel vahemaadel. Lüliti on ehitatud vastupidava metallkorpusega ja mõeldud ventilaatorivabaks mis tagab vaikse töö ja vähendab hooldusvajadust. See kaalub 0 55 kg ja selle mõõtmed on 217 6 mm × 27 8 mm × 103 55 mm mistõttu on see kompaktne ja seda on lihtne paigaldada erinevatesse keskkondadesse. Lülitit saab paigaldada lauale seinale riiulile koos paigalduskõrvadega ning see sobib ka posti- või rööppaigalduseks. Tehniliste näitajate poolest on lülitil 8K MAC-aadresside tabel 5 60 Gbps kommutatsioonivõimsus ja 4 17 Mpps pakettide edastamise kiirus. Sisemine vahemälu on 4 Mbit. Need spetsifikatsioonid tagavad võrguliikluse tõhusa käsitlemise ja ühenduvuse kõigis portides. DS-3E0310HP-E on varustatud ka 6 KV ülepingekaitsefunktsiooniga mis suurendab selle töökindlust karmides keskkonnatingimustes. Lüliti vastab mitmetele EMC- ja ohutusstandarditele sealhulgas FCC CE-EMC IC RCM UL CB ja CE-LVD. See vastavus tagab et lüliti vastab kõrgetele tööohutuse ja elektromagnetilise ühilduvuse standarditele. Kokkuvõttes on Hikvision DS-3E0310HP-E mitmekülgne ja töökindel PoE-lüliti mis sobib ideaalselt kasutamiseks erinevates võrgukonfiguratsioonides eriti nendes mis nõuavad laiendatud PoE-ülekannet ja suure võimsusega väljundit ühendatud seadmetele. Tänu oma konstruktsioonile ja omadustele on see sobiv valik nii väikeste kui ka suuremahuliste võrgurakenduste jaoks.
• Managed L2 Web-based management • Quality of Service (QoS) support Configuring Location Settings (CLI) • Basic switching RJ-45 Ethernet ports quantity: 24 • MAC address table: 8000 entries • Access Control List (ACL) • 1U Rack mounting • AC Power supply included Power over Ethernet (PoE)
• Multi-Gigabit access switch with 12x 2.5G and 12x 10G multi-Gigabit Ethernet ports as well as 4x 25G SFP28, and 2x 100G QSFP28 uplink or stacking ports • PoE support as per IEEE 802.3bt PD-Type 4 on all 24 Ethernet ports with up to 1,440 watts PoE budget • Support of Virtual Port Channel (VPC or MC-LAG) to implement networks with 100% uptime • Full layer 3 functionality thanks to VRRP, DHCP, static and policy-based dynamic routing via OSPF v2/v3 and BGP4 • Backplane stacking optionally (SW-defined) via SFP28 or QSFP28 ports • Incl. 1x hot-swappable PSU (second PSU optional) and 2x redundant (n+1), hot-swappable fans for maximum reliability • Security with configurable access control on all ports as per IEEE 802.1X and access control lists • Secure remote management through TACACS+, SSH, SSL, and SNMPv3 • Industry standard CLI • Cloud-managed LAN and switch stacking for fast configuration and convenient management via the LMC • IPv6 and IPv4 support for modern enterprise networks • Including switch slide-in rails (2x 19” mounting brackets and telescopic slides), serial & micro-USB configuration cables, and IEC power cord
• Multi-Gigabit access switch with 12x 2.5 Gigabit Ethernet ports, 12x 1 Gigabit Ethernet ports and 4x SFP+ • Basic Layer 3 features like static routing and DHCP server • PoE support as per IEEE 802.3af/at for the efficient and centralized supply of power (370 watts) to all devices connected to it • Security through configurable access control on all ports according to IEEE 802.1X • Secure remote management through TACACS+, SSH, SSL and SNMPv3 • Cloud-managed LAN - for simple and fast configuration via the LANCOM Management Cloud • Ideal in combination with Wi-Fi 6 access points like the LX-6400 and LX-6402 • IPv6 and IPv4 support for modern enterprise networks
• Managed L2+ Web-based management • Quality of Service (QoS) support Configuring Location Settings (CLI) • Basic switching RJ-45 Ethernet ports quantity: 10 • MAC address table: 8000 entries • Access Control List (ACL) • Rack mounting • AC Power supply included
Tootekood: Festa FS318G(UN)GTIN: 8885020623994Võrguseadmed
The TP-Link Fiesta FS318G V1 is a versatile rack-mountable switch designed to meet various networking demands. With capacities for up to 16 static routes and 32 IP interfaces, this device offers reliable performance that scales with your networking needs. Its fanless design ensures quiet operation, making it suitable for sensitive environments while providing a robust solution for effective network management with features such as VLAN support, IGMP snooping, and secure remote management protocols including SNMP and SSH.Constructed with a durable metal housing, the Fiesta FS318G V1 also includes extensive support for energy efficiency, thanks to Energy-Efficient Ethernet (EEE) technology. This switch's capability to handle 10/100/1000Base-T connections ensures high-speed access, complemented by its support for Jumbo Frame of 9KB, which optimizes data flow in larger networks. With features like automatic topology detection and firmware upgradability, the TP-Link Fiesta FS318G V1 provides a comprehensive solution for both small and growing networks alike.
Tootekood: Festa FS328G(UN)GTIN: 8885020624014Võrguseadmed
The TP-Link Festa FS328G V1 is designed to enhance networking capabilities with its efficient architecture and robust features. With 24 10/100/1000Base-T ports and 4 Gigabit SFP ports, this switch supports an extensive range of devices, facilitating smooth and rapid data transmission. Its support for VLAN and IGMP snooping enriches network segmentation and traffic management, making it suitable for various environments, from small offices to larger organizations. Equipped with 32 MB of flash memory and 256 MB of RAM, the device ensures reliable performance even under heavy usage scenarios. The management protocols, including SNMP and DHCP, allow for easy monitoring and control of network resources. Operating efficiently within a temperature range of 0°C to 40°C and featuring a fanless design, the TP-Link FS328G V1 promotes quieter operation while maintaining optimal performance, even in demanding environments.
Enterprise-grade 24-port, Layer 3 Etherlighting™ PoE+++ switch with high-capacity 10 GbE RJ45 and 25G SFP28 connections for high availability system design.
Why is it worth having? convenience, speed and reliabilityDiscover the Qoltec Wireless Mini Adapter WiFi/BT 5.4, which takes your devices to the next level of connectivity. Its carefully refined design and high-quality components guarantee full utilisation of the capabilities of the modern Wi-Fi 6 standard (AX) standard. By choosing this adapter, you are investing in the comfort of everyday Internet use and complete freedom to connect wireless devices. This gives you a stable, fast and reliable Internet connection, smooth operation, low latency and high bandwidth, ideal for cloud computing. Advanced Bluetooth 5.4 technology provides greater range, energy savings and fast data exchange with mobile devices such as headphones, speakers and controllers.Enjoy stable and fast Internet without any interruptionsOur mini WiFi adapter is a compact and extremely efficient solution that will provide your computer with access to ultra-fast Internet in the modern Wi-Fi 6 (AX) standard. It is also ideal for travelling, thanks to its small size. The AX standard uses advanced MU-MIMO and OFDMA technologies, which allow data to be sent and received simultaneously to multiple devices. This makes the connection more stable, resistant to interference and significantly more efficient, even in an environment with many active users.Precision workmanship and top-quality componentsOur adapter combines two key technologies: fast Wi-Fi 6 (AX) and Bluetooth 5.4, allowing you to easily connect your computer to both your network and wireless devices. The USB 2.0 Plug & Play connector allows for instant connection to your laptop or PC, and its compact design makes it ideal for travel. Play allows you to connect instantly to your laptop or PC, and its compact design makes it ideal for travelling. Support for speeds up to 900 Mbps ensures smooth web browsing, 4K streaming and stable online gaming. Enjoy the internet and Bluetooth devices conveniently and without interference wherever you are.One connection a huge change in everyday device usageYou want to speed up your computer without costly component replacements,You need stable Internet for films, work and games,You value wireless convenience without tangled cables,You are looking for a small, reliable and modern solution that works immediately after connection.
The FRITZ!SFP XGS-PON module brings the latest fiber optic standard, XGS-PON, to your FRITZ!Box 5590 and 5530 Fiber. With its simple installation, you can get started right away and enjoy fiber optic high-speed internet up to 10 Gbps. Type: Transceiver EAN code 4023125029431 Manufacturer No. 20002943 SFP+ module design Network connections: Fiber optic, 1x SC Further information for XGS-PON connectors (ITU-T G.9807, 10-gigabit-capable symmetric passive optical network) Note for FRITZ!Box 5590 or 5530 Fiber with FRITZ!OS 7.50 or newer Accessories included. Installation instructions.
Usaldusväärne tööstuslik ruuter Teltonika RUT241 eSIM 4G tööstusruuter on mitmekülgne ja kompaktne võrgulahendus, mis on mõeldud tööstus- ja IoT-rakenduste jaoks. See 4G LTE ühenduvusega ruuter pakub kiiret ja usaldusväärset internetiühendust erinevates keskkondades, sealhulgas kaugemates kohtades ja mobiilsetes rakendustes. RUT241 on tänu oma vastupidavale konstruktsioonile ehitatud karmidele tööstustingimustele vastu pidama, mistõttu on see suurepärane valik tootmis-, automaatika-, turva- ja transpordivaldkonnas. Sisseehitatud eSIM-tehnoloogia kaotab vajaduse füüsilise SIM-kaardi järele, võimaldades kasutajatel vahetada erinevate operaatorite vahel eemalt ja tagada sujuv ühenduvus ülemaailmse võrguga ühilduvusega. RUT241 pakub kompaktses vormis tugevat jõudlust, olenemata sellest, kas seda kasutatakse esmaseks ühenduvuseks või tagavaralahenduseks. 4G LTE Cat 4 tehnoloogiaga varustatud Teltonika RUT241 eSIM ruuter pakub allalaadimiskiirust kuni 150 Mbit/s, tagades andmemahukate rakenduste sujuva toimimise. eSIM-funktsioon suurendab paindlikkust, võimaldades operaatorite vahetamist üle õhu, vähendades sõltuvust füüsilistest SIM-kaartidest ja lihtsustades võrgu haldamist. Lisaks mobiilsideühendusele sisaldab ruuter Wi-Fi 4 (802.11n) kohaliku traadita juurdepääsu jaoks, mis võimaldab mitme seadme samaaegset ühendamist. Traadiga Ethernet-port pakub täiendavaid ühendusvõimalusi tööstusseadmete, arvutite või väliste võrguseadmete jaoks. Olenemata sellest, kas RUT241 on kasutusel kaugseire, arukate linnarakenduste või tööstusautomaatika puhul, tagab see automaatse ümberlülitumise ja mitme WAN-redundantsuse võimaluse abil katkematu side. Tugev turvalisus ja vastupidavus Teltonika RUT241 eSIM pakub täiustatud tulemüüri konfiguratsioone, VPN-tuge (OpenVPN, IPsec, WireGuard) ja turvalist kaugjuurdepääsu. Marsruuter toetab mitmeid autentimismeetodeid, aidates ettevõtetel säilitada oma võrkude kõrgeid turvastandardeid. Kaugseire ja -juhtimine on tehtud lihtsaks Teltonika kaugjuhtimissüsteemi (RMS) abil, mis võimaldab kasutajatel seadmeid konfigureerida, jälgida ja tõrkeid kõrvaldada ükskõik kust. See tagab kiire reageerimisaja ja vähendab kriitiliste rakenduste seisakuid. Tänu sündmuste logimise, reaalajas toimivate hoiatuste ja kasutuse jälgimise toetusele saavad ettevõtted optimeerida võrgu tõhusust ja säilitada täieliku kontrolli oma ühenduvuse infrastruktuuri üle. RUT241i vastupidav alumiiniumist korpus on mõeldud karmide keskkondade jaoks, tagades vastupidavuse temperatuurikõikumiste, vibratsiooni ja elektriliste ülepingete suhtes. Laia töötemperatuurivahemiku (-40 °C kuni +75 °C) tõttu sobib see kasutamiseks tööstuslikes, välistingimustes ja sõidukitele paigaldatud rakendustes. Marsruuter toetab DIN-riba ja seinakinnitust, mis tagab paindliku paigalduse erinevate tööstuslike seadistuste jaoks. Tänu madalale energiatarbimisele ja võimalusele töötada passiivse PoE (Power over Ethernet) abil on RUT241 kuluefektiivne ja energiatõhus lahendus. Tänu kompaktsele suurusele ja suure jõudlusega võimekusele on see ideaalne valik ettevõtetele, kes otsivad usaldusväärseid, turvalisi ja skaleeritavaid võrgulahendusi nõudlikes keskkondades.
• Simple installation of LANCOM access points of the LX-7000 series on support rails of suspended ceilings • Compatible with Odenwald and grid ceilings • Incl. pre-assembled locking screws and installation instructions • Available as a bulk of 5
• Dual concurrent Wi-Fi – parallel operation at 2.4 GHz and 5 GHz with Wi-Fi 6 (IEEE 802.11ax) • 4x4 multi-user MIMO for simultaneous beam-steering for multiple clients in down- an uplink mode • OFDMA for efficient Wi-Fi channel usage • Significantly longer battery life thanks to TWT • Support of the security standard WPA3 • 8 integrated 180° antennas • Automated operation via the LANCOM Management Cloud (LMC) • Power supply optionally by Power over Ethernet (IEEE 802.3at) or power-supply unit (included) • 1x 2.5-Gigabit Ethernet PoE port ( IEEE 802.3at for up to 30 Watt), 1x Gigabit Ethernet port
The FRITZ!Box 7632 supports Wi-Fi 7 (802.11be) and therefore an optimal WLAN network for all devices. Smartphones, tablets, game consoles and computers - more and more devices now use Wi-Fi. The FRITZ!Box 7632 is prepared for this and supports the latest WLAN generation Wi-Fi 7 (WLAN BE). New transmission methods ensure the highest speeds in your WLAN network. Best of all: Wi-Fi 7 achieves optimal data transfer speeds even when multiple devices are registered on your home network at the same time. Proven standards such as Wi-Fi 6 (802.11ax), Wi-Fi 5 (802.11ac) and Wi-Fi 4 (802.11n) also ensure compatibility with all devices. Enter router EAN4023125031670 Manufacturer number 20003167 DECT ULE smart home Desktop design Application area: home networks Network connections Analog Other WLAN standards Transfer speed Features DSL modem type Enter Feature Supports DSL including G.fast (212MHz) up to 1Gbps as well as Supervectoring from 35b to 300Mbps | Telephony via DECT, IP/SIP | FRITZ!OS with VPN, parental controls, media server, FRITZ!NAS, WLAN guest access and many other features. M
FRITZ! Box 6850 5G V2 5G is a desktop mobile Wi-Fi router designed to provide high-speed internet access through 3G/UMTS, 4G/LTE and 5G mobile networks. It enables wireless Gigabit speeds, fast downloads and low-delay streaming without requiring a fixed broadband connection. The router can serve as an internet gateway in different locations, including a home, office or holiday apartment. It is suitable for home networks and business environments where mobile internet connectivity and flexible placement are important. Dual-band Wi-Fi operates in the 2.4 GHz and 5 GHz bands, with transfer rates of 400 MBit/s and 866 MBit/s respectively. Support for Wi-Fi 3 (802.11b), Wi-Fi 3 (802.11g), Wi-Fi 4 (802.11n) and Wi-Fi 5 (802.11ac), together with WPA2 and WPA3 encryption, provides compatibility with a wide range of wireless devices and protected network access. The integrated 5G mobile modem uses a mini-SIM card and is supported by external mobile antennas with SMA connectors. Tools for optimal antenna alignment help configure the connection, while WPS simplifies connecting compatible wireless devices. The router also offers a guest Wi-Fi access point with a splash page. FRITZ! Box 6850 5G V2 5G includes an integrated DECT base for up to 6 cordless phones and supports VoIP, VoLTE and VoNR. Its Stateful Packet Inspection firewall with port forwarding helps protect network traffic, while Smart Home functions support power and heating management, schedules, scenarios and routines with if-then links. For local network services, the router provides FRITZ!NAS and a media server for music, pictures and films using DLNA/UPnP AV. Its connections include RJ-45 network, RJ-11 analog and 1x USB-A 3.2 Gen 1 (5 Gbit/s). The device is powered through a power adapter connection and has a power consumption of 6 W during operation. Product type: Router EAN: 4023125031809 Manufacturer code: 20003180 Smart home standard: DECT ULE Design: Desktop Application: Home networks, business Network connection: RJ-45 Analog connection: RJ-11 Connection feature: Auto-MDI/MDIX Other connection: 1x USB-A 3.2 Gen 1 (5 Gbit/s) Wi-Fi standards: Wi-Fi 3 (802.11b), Wi-Fi 3 (802.11g), Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) Wi-Fi bands: 2.4 GHz, 5 GHz Wi-Fi encryption: WPA2, WPA3 Wi-Fi transfer rate: 400 MBit/s (Wi-Fi 2.4 GHz), 866 MBit/s (Wi-Fi 5 GHz) Wi-Fi feature: WPS Mobile network standards: 3G/UMTS, 4G/LTE, 5G SIM card: mini-SIM card Power supply: Power adapter connection Power consumption: 6 W during operation DECT base: For up to 6 cordless phones Voice services: VoIP/VoLTE/VoNR Firewall: Stateful Packet Inspection with port forwarding Media server: DLNA/UPnP AV Included accessories: External mobile antennas (SMA), 1.5 m LAN cable, power adapter, quick guide Dimensions: Width: 200 mm x Height: 45 mm x Depth/Length: 152 mm
