Original part number NPP-C648CM-001 Product name Gembird 19" patch panel 48 port 2U cat.6 with rear cable management, black Producer Gembird Class of product Patchpanel 19"&10" Number of ports 48 Type of connector 1 x RJ45 Category 6 Wiring type no data Additional information Termination: 110-typeSpace saving, high-density 19" panel designDesigned to mount to any standard 19" rack or cabinet50µ gold-plated contactsBlack electrostatic powder-coated steelAccommodates top, bottom or side cable entryWrite-on designation label with clear holder on front sideRear cover with wire management bar Height 89 mm Width 483 mm Depth 33 mm Net weight 1.3 kg Colour Black
Original part number POE-24-24W-G Product name Ubiquiti PoE-24G Passive PoE Adapter EU, 24V 1A, ESD prot, 24W, Gigagbit Eth. Producer Ubiquiti Networks Class of product
10GBASE-SR SFP+ Multi Mode LC Module 550 m (1,804 feet) with DDMTEG-10GBSR (Version v1.0R)Hot-pluggable SFP+ transceiverSFP+ MSA compliantSupported throughput up to 10.5 GbpsMulti Mode fiber for distances up to 550 m (1,804 feet)850 nm wavelengthDuplex LC connectorDigital Diagnostics Monitoring (DDM) supportOperating temperature: 0 to 70 °C (32 to 158 °F)Single 3.3 V power supply
Using airMAX ac technology, the IsoStation 5AC supports up to 450+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation 5AC comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation 5AC for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Attached cable management panel ensures easy stability of installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Attached cable management panel. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL9004.
Original part number PP6U-5M/G Product name Gembird :UTP Cat6 Patch cord, 5 m, green Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Green
Original part number DN-82020-1 Product name DIGITUS Fast Ethernet Media Converter, SC / RJ45 Producer DIGITUS Class of product Media converter Network protocol and connector type 1 FastEthernet 100BaseTX - RJ45 Network protocol and connector type 2 FastEthernet 100BaseFX - SC Wiring type multimode fibre-optic cable62.5/125 (OM1)multimode fibre-optic cable 50/125 (OM2)UTP - unschielded twisted pair cable, 4 pairsFTP/STP - shielded 4 twisted-pair cable Height 25 mm Width 70 mm Length 93 mm Net weight 0.4 kg Additional information Distance up to 2kmAuto MDI/MDI-XAuto-negotiation of full- and half-duplexCan be mounted in 19" rackin bundle: external AC adapter
Surface mounted data box is designed for use in high-speed data communication networks. Is a passive part structured cabling used in subscriber's points. Socket is equipped with unshielded RJ-45 port category 6. - Unshielded RJ-45 port category 6. - Universal IDC/LSA connectors in accordance with T568A/B. - Allows connection of conductors 26-22 AWG. - Very simple and quick assembly. - Color: white.
TRENDnet’s professional punch down tool, TC-PDT with 110 and Krone blades, inserts and cuts terminations in one operation. Adjustable high and low actuation setting accommodates termination requirements or user preference. With spare storage that helps prevent blade loss, the precision blades are conveniently interchangeable and reversible between 110 and Krone. The punch down tool offers reliable, easy-to-use operation at an affordable price.Comfortable shape, easy to handleInterchangeable and reversible bladesSafe storage for spare bladeTwist and Lock style holder provides fast, easy blade changes and prevents blade pullout1-year limited warranty
VDV & USB Cable Tester TC-NT3 (Version v1.0R) Comprehensive cable tester for network professionals Tests voice, data, video, and USB cables Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.) Identifies severed, short circuit, and cross connected pins Quick pass/fail for large test quantities Blinking Hub/Switch Mode identifies connected hub/switch port Convenient travel case TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port’s LED indicator to blink Cable Distance Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
TRENDnet’s TI-F10S30 is a compact IP40 rated 100Base-FX fiber converter with hardened components rated for extreme industrial environments. It accommodates long distance networking with 100Base-FX Single-Mode fiber over distances of up to 30 km (18.6 miles). Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.Andmeedastuskiirus (maksimaalne)200 Mbit/sKonverteri sisendi liides100Base-TXKonverteri väljundi liides100Base-FXVõrgustandardidIEEE 802.3,IEEE 802.3u,IEEE 802.3xEthernet-liidese tüüpKiire EthernetEthernet LAN-i andmeedastuskiirused10,100 Mbit/sEtherneti vaskkaablite tehnoloogia10BASE-T,100BASE-TXEtherneti kiudkaablite tehnoloogia100BASE-FXVoo reguleerimise tugiJahAutomaatne ühildumineJahDupleks-süsteemTäisversioon, PoolFiiberoptiline pistmikSCÜhenduvustehnoloogiaJuhtmega ühendatudEthernet LAN (RJ-45) pordid1Kiudjuhtme portide arv1Maksimaalne ülekandekaugus30000 mLainepikkus1310 nmKiustruktuurÜksikrežiimToetatud kiudkaabli läbimõõt9/125Lingi bilanss7 dBSisemineEiLED-indikaatoridJahToote värvMustKorpuse materjalMetallRahvusvahelise kaitse (IP) koodIP40DIN-liistu paigaldamineJahSisendpinge12-60Elektritarbimine (max)1,92 WKiirpaigaldusjuhendJahKasutamistemperatuur (T-T)-40 - 75 °CSertifikaatFCC, CELaius60 mmSügavus50 mmKõrgus35 mmKaal90 g
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 2m
Tootja: Gembird Tootegrupp: tööriist/tester tööriista tüüp: Crimp tool for RJ45 (8P8C) plugs, Crimp tool for RJ12 (6P6C) plugs, Crimp tool for RJ11 (4P4C) plugs Lisaandmed: universaalne modular Crimping tool, sobib all 8P8C, 6P6C ja 6P4C modular plugs, Materials laius: 184 mm kõrgus: 70 mm sügavus: 15 mm Netokaal: 280 g
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
8 x Gigabit PoE+ ports 61W PoE budget 16Gbps switching capacity Sturdy metal switch Plug and Play installation Use with TRENDnet's PoE Splitter to network and power non-PoE devices The 8-Port Gigabit PoE+ Switch, model TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE and PoE+ devices with a 61W PoE budget. Plug and Play this sturdy metal switch for reliable high-speed PoE networking. PoE Power A 61W PoE power budget supports up to eight Power over Ethernet devices. Gigabit Ethernet Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations. Compact Design With a compact and lightweight housing design, this switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation. PoE Supplies up to 30W of PoE+ power per port with a total power budget of 61W. Supports both PoE (802.3af) and PoE+ (802.3at) devices. Ports Eight gigabit PoE+ ports Switching Capacity 16Gbps switching capacity Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB) for increased performance Energy Savings Embedded GREENnet technology reduces power consumption Housing Sturdy metal housing LED Indicators LED indicators convey port status
• 20 m • RJ-45 Sirge Meessoost • RJ-45 Sirge Meessoost • Cat6a S/FTP (S-STP) • 10 Gigabit Ethernet, Kiire Ethernet, Gigabit Ethernet 10000 Mbit/s • Power over Ethernet tugi Isehäälestuv • Roheline Equip 605649, 20 m, Cat6a, S/FTP (S-STP), RJ-45, RJ-45, Roheline
The high quality Cat 6 patch cable from LogiLink is manufactured according to European standard EN 50173-1 as well as the international standard ISO/IEC 11801 It has 8 cores with a thickness of AWG 24/7 and is unshielded. The required cable length can be taken from a carton out of its opening and the remaining balance is thus protected from dirt and damage.
Performance Breakthrough airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.Superior RF IsolationCompare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.Superior ProcessingUbiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.Advanced Software TechnologyUbiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
