Câble de brassage à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, TPEConnecteur intégré sans accroc pour la protection du verrouPlaqué ou broches pour une meilleure conductivité et l'élimination de la perte de signalGarantie de 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le TPE utilisé comme matériau pour la gaine offre une flexibilité accrue et facilite la manipulation des câbles.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: UTP - unschielded twisted pair kaabel, 4 pairs, CAT5E Lisaandmed: bag of 10 tk kõrgus: andmed puuduvad laius: andmed puuduvad pikkus: andmed puuduvad
TRENDnet’s USB-C to Gigabit Adapter + USB Hub, model TUC-ETGH3, adds a Gigabit Ethernet port and three 5Gbps SuperSpeed USB 3.0 ports to a Windows® or Mac® computer. Easy installation – simply plug in flash drives, printers, scanners and other USB 3.0 devices at speeds ten times faster than a USB 2.0 connection. This USB-C adapter and hub combination is also compatible with USB 2.0 and 1.1 devices. USB-C Easily connect up to three USB 3.0 devices to a USB-C enabled desktop or notebook PC. Gigabit Speeds Experience full duplex 2Gbps connection speeds with this compact USB-C Gigabit adapter. Compatibility This USB-C adapter and hub combo is compatible with Windows® and Mac® operating systems. Gigabit Ethernet Adds a Gigabit Ethernet port USB-C Easily connect up to three USB 3.0 devices to a USB-C enabled desktop or notebook PC Installation Flexibility Integrated 12.7cm (5 in.) USB-C cable accommodates most installation scenarios Operating Systems Compatible with Windows and Mac operating systems Backwards Compatibility Compatible with USB 2.0 and 1.1 devices LED Indicators LED indicators display link and activity
The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost.• Supports all LHG series, products, including LHG XL.• Made from metal.• Package also includes a U-bolt and a K-58 mounting kit.
Build and expand your network with the Ubiquiti® UniFi® Switch XG 6POE, model US-XG-6POE. It is a fully managed, 6-port, 10G switch with 802.3bt PoE++. For deployment versatility, four 10G RJ45 ports offer 802.3bt PoE++ for powering devices, and two SFP+ ports are designed for high‑capacity fiber uplinks.Switching PerformanceThe UniFi Switch XG 6POE offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The switch features a total non-blocking throughput of up to 60 GbpsModel: US-XG-6POE• (4) 100/1000 Mbps and 2.5/5/10G RJ45 Ports• (2) 1/10 SFP+ Ports• (4) 802.bt PoE++ Ports• Non‑Blocking Throughput: 60 Gbps• Switching Capacity: 120 Gbps• Forwarding Rate: 89.3 Mpps
Tootja: Lanberg Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5e, Shielded Lisaandmed: Set of 100 tk of shielded RJ-45 [8P8C] Cat.5E võrguseade plugs, intended mainly, for FTP LAN kaablid. värv: Metal
Advanced Manageable PoE Solution for Hardened Environment PLANET IGS-5225-4P2S L2+ Industrial Managed PoE+ Switch, featuring 4 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 2 100/1000X fiber ports in an IP40 rugged but compact-sized case, can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-4P2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 10ms. Cybersecurity Network Solution to Minimize Security Risks The cybersecurity feature that virtually needs no effort and cost to have includes the protection of the switch management and the enhanced security of the mission-critical network. Both SSH and SSL protocols are utilized to provide strong protection against advanced threats. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-4P2S’ GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI. Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the IGS-5225-4P2S features the following special PoE management functions: PD alive check Scheduled power recycling PoE schedule PoE usage monitoring Intelligent Alive Check for Powered Device The IGS-5225-4P2S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-4P2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-4P2S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-5225-4P2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-5225-4P2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-5225-4P2S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-4P2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-4P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-4P2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-4P2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 2 trunk groups with 2 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-4P2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-4P2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-4P2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225-4P2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP Provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-4P2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-4P2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-4P2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-4P2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Industrial Area Department/Workgroup PoE Switch Providing up to 4 PoE+, in-line power interfaces, the IGS-5225-4P2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 4 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-4P2S makes the installation of IP cameras or wireless AP easier and more efficient.
Tootja: Intellinet võrguseade Solutions Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 230 V AC väljundpinge: 44 V DC, 57 V DC Real power: 30 vatti Toetatud protokollid ja standardid: IEEE 802.3af - Power over Ethernet, IEEE 802.3at - Power over Ethernet+, IEEE 802.3 - 10BaseT, IEEE 802.3ab - 1000BaseT, IEEE 802.3u - 100BaseTX Lisaandmed: 1 RJ-45 1000 Mbps input port, 1 RJ-45 1000 Mbps data ja power väljund ports, 1 toide ühenduspesa (3 pin) kõrgus: 35 mm laius: 172 mm sügavus: 154 mm
