6-Port Cloud Managed Desktop Switch with 4-Port PoE > 4 × RJ45 10/100 Mbps PoE ports, 2 × RJ45 Gigabit ports. > 60 W total PoE budget, 802.3af/at on all PoE ports, additional Hi-PoE on orange port. > DIP switch to fast turn on/off working mode of Cloud-Managed, PoE Watchdog, Long Distance PoE. > Wide operating temperature ranging from –10 °C to 55 °C. > Supports VLAN and loop protection. > WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network. > Easy config to auto detect and set up network and security systems.
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
Kiire 5G UniFi 5G Max Outdoor on võimas välistingimustes kasutatav 5G-modem, mis on loodud pakkuma kiiret ja usaldusväärset mobiilset internetti UniFi-konsoolidele ja pilveväravatele. See toetab kaasaegseid 5G NR-võrke, mille maksimaalne allalaadimiskiirus on kuni 3,4 Gbps, samas jäädes täielikult ühilduvaks 4G LTE- ja 3G-võrkudega. See muudab selle sobivaks paljudele piirkondadele ja mobiilsideoperaatoritele üle kogu maailma. Kahe SIM-kaardi tugi, sealhulgas Nano-SIM ja eSIM, võimaldab automaatset üleminekut mobiilsideoperaatorite vahel, et säilitada stabiilne ühendus võrgu probleemide korral. Pange tähele, et teist Nano-SIM-kaardi pesa ei saa kasutada, kui eSIM on aktiivne. Seade töötab eriti hästi kohtades, kus kiudoptika pole kättesaadav või kus mobiilside on vajalik esmase või varuühendusena. Tänu täiustatud raadio tehnoloogia toetusele ja suurele ülekandevõimsusele tagab see stabiilse jõudluse isegi nõrgema signaaliga piirkondades. UniFi 5G Max Outdoor on ideaalne kaugemates kohtades, ajutistes paigaldistes, välistingimustes ja äri jaoks olulistes kohtades, kus on vaja usaldusväärset kiiret internetiühendust. Tugev korpus UniFi 5G Max Outdoor on loodud töötama usaldusväärselt nõudlikes välistingimustes. Selle korpus ühendab alumiiniumsulamit UV-stabiilse polükarbonaadiga, pakkudes tugevat kaitset ilmastikuolude, päikesevalguse ja mehaanilise koormuse eest. Seade on vaikimisi IPX6-klassiga ja võib saavutada IP67-kaitse, kui seda kasutatakse koos valikulise kaabliklambri komplektiga, mis muudab selle sobivaks vihma, lume, tolmu ja niiskuse jaoks. Paindlikud paigaldusvõimalused võimaldavad paigaldamist seinale või postile, kõik vajalikud paigaldustarvikud on komplektis kaasas. Tugev konstruktsioon on projekteeritud taluma tugevat tuult kuni 200 km/h, tagades ohutu paigaldamise katustele, tornidele või avatud välistingimustes asuvatele konstruktsioonidele. Integreeritud mobiilsideantennid, sealhulgas suure võimsusega antennid allalinkide jaoks, aitavad säilitada tugeva ja stabiilse signaali vastuvõtu. Toide toimub PoE kaudu, mis lihtsustab paigaldamist, vähendades eraldi toitekaablite vajadust. See vastupidav disain tagab pikaajalise stabiilsuse tööstuslikes, kaubanduslikes ja kaugetes välistingimustes. Lihtne haldamine UniFi 5G Max Outdoor on mõeldud töötama UniFi Cloud Gateway ja UniFi konsoolidega välise 5G-modemina. See ühendub Etherneti kaudu ja pakub UniFi võrkudele kiiret mobiilset WAN-üleslinki. Seade ei tööta iseseisva ruuterina, vaid täiendab olemasolevat UniFi infrastruktuuri, pakkudes esmast või varu-internetiühendust. Üks 2,5 GbE Etherneti port tagab kiire ühenduse väravate või lülititega, tagades, et mobiilsideühendus ei muutu pudelikaelaks. Power over Ethernet lihtsustab veelgi paigaldamist ja hooldust. Seade kasutab suure võimsusega raadiosidet, et parandada üleslülituse jõudlust, mis on eriti kasulik kohtades, kus võrgutingimused on keerulised. Maksimaalse energiatarbimisega vaid 14,5 W on seade energiatõhus, pakkudes samal ajal ettevõttele sobivat jõudlust. Lai töötemperatuurivahemik -40 °C kuni +65 °C võimaldab usaldusväärset töötamist äärmuslikes kliimatingimustes. UniFi 5G Max Outdoor sobib hästi ettevõtetele, teenusepakkujatele ja organisatsioonidele, kes vajavad stabiilset, hallatavat ja välistingimustes kasutatavat 5G-ühenduslahendust.
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAMmodulation, and 80MHz channels. 802.11ac opens up new possibilities and speedsnever possible before.The SXT ac is a new member in our 802.11ac product lineup, currently two models areavailable — with regular 28 degree antenna, and the SA model with a 90 wide beamwidthsector antenna. Also supports 802.11a/n mode and is compatible with all legacyRouterBOARD devices, including Nstream and Nv2 protocols. Both devices come withGigabit Ethernet.• 1300mW RF output• extended temperature range -30C to +80C• up to 540Mbps throughput• low latency Point to Point
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e UTP (unshielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.Switching resultsCRS309-1G-8S+IN ModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput6,583.279,946.719,032.077,954.9120,535.761,714.3SwitchingNon blocking Layer 2 capacity6,583.2159,893.419,032.0155,909.8120,535.7123,428.6SwitchingNon blocking Layer 1 throughput6,583.281,000.019,032.081,000.0120,535.781,000.0SwitchingNon blocking Layer 1 capacity6,583.2162,000.019,032.0162,000.0120,535.7162,000.0Ethernet test resultsCRS309-1G-8S+IN98DX8208 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)217,52641.3231,1946.6243,6124.7Bridging25 bridge filter rules117,41425.7117,4480.9145,274.3Routingnone (fast path)207,62521.1217,6891.3229,5117.5Routing25 simple queues121,11470.6122,7502.6145,274.3Routing25 ip filter rules83,61015.283,1340.488,945.5
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Connection: 1 x LAN (RJ45) 10/100/1000/2500 Mbps networks with automatic recognition Conforms with: IEEE802.3, IEEE802.3u & IEEE802.3ab specification Chipset: Realtek RTL8125B - 2500Base-T Ethernet Controller Supports: auto MDI/MDIX crossover PCI Express: Specification 2.1 Wake-on-LAN (WOL): Yes IEEE802.1q VLAN tagging: Yes LED operating display: Active / data traffic / 2.5G data traffic Supported operating systems: Windows 7/8/10 (32/64Bit), Windows Server 2008 R2/2012 R2/2016, Linux 4 and higher Operating temperature: 5 °C to +50 °C Dimensions (WxDxH): 12 x 9.8 x 2.2 cm Weight: 35.2 g
5G Ülikõrge mobiilside kiirus kuni 1 Gbps SA JA NSA Toetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuri ÜLIVÄIKE LATENTSUS Ühekohaline latentsus missioonikriitiliste rakenduste jaoks GIGABITINE ETHERNET Usaldusväärne side suure andmeedastuse jaoks KOMPAKTSUS Üks väikseimaid turul saadaolevaid 5G-väravaid TULEVIKUKINDLUS Tagasi ühildub 4G (LTE CAT 20) ja 3G võrgutehnoloogiatega TRB500-värav on kompaktse suurusega ja energiatõhus tööstuslik värav, millel on Gigabit Ethernet-liides ja kaks konfigureeritavat I/O-d, mis võimaldab kõrgetasemelist kohandamist ja paljude stsenaariumide rakendamist. See seade võimaldab 5G-võrgu kiirust üliväikese latentsusega töökriitiliste infrastruktuuride jaoks ja suurt andmeside läbilaskevõimet, mille tagavad 4 välisantenni, mis võimaldavad 4x4 MIMO kasutamist. TRB500 on varustatud operatsioonisüsteemiga RutOS, mis pakub täiustatud turvafunktsioone ja ühilduvust meie kaugjuhtimissüsteemiga (RMS), et optimeerida suurte seadmeparkide kaugjuhtimise ja jälgimise võimalusi.
AX5400 Ceiling Mount WiFi 6 Access Point - Blazing-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz totals 5378 Mbps WiFi speeds.† - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160.‡ - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations.§ - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment.§ - PoE+ Powered: Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations. EAP670 Type Wireless Access Point, Data transmission speed 5378 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4 GHz/5 GHz Dimensions 243 × 243 × 64 mm
TX201 PCI-E 1x2.5Gb network card Amazing speed - 2.5 Gigabit Ethernet enables access to your multi-gigabit network. The TX201 is up to any task, whether it's local data transfer or internet access. Compatibility with lower standards - The high speeds and ultra-low latency of the 2.5GBase-T standard do not preclude support for devices that use less advanced technologies such as Fast Ethernet or Gigabit Ethernet. The network card automatically negotiates connection speeds. Low-Profile and Full-Height Herring - In addition to the standard herring, a low-profile herring is included with the product for mini tower PCs. Multi-operating system support - Compatibility with Windows 11/10/8.1/8/7, Windows Server 2022/2019/2016/2012/2008 R2 and Linux means the card can be used on a wide variety of devices. Incredible 2.5G network connectivity 2.5 Gigabit Ethernet achieves an incredible data transfer rate of up to 2.5 billion bits per second 2.5× more than the Gigabit Ethernet standard. The TX201 card is ready for any task, such as bandwidth-hungry local data transfer or Internet access. Home data storage available in seconds For local connections, the PCIe 2.5G network card helps build an instant transport channel between the central server and other equipment on the local network. Performing bandwidth-intensive activities at home or in the office won't be difficult, so the network can easily handle local data transmission as well. Extremely fast response Along with 2.5 Gigabit internet access, your gaming experience will become fully optimised with a huge increase in speed, lower latency and better responsiveness. Downloading games, smooth live streaming, huge backups via the cloud are simple and fast, as is character selection. Performance versatility proven by multi-standard compatibility 2.5GBase-T technology is compatible with standards that provide speeds of both 2.5Gb/s, 1Gb/s, 100Mb/s and 10Mb/s Base-T standards. The 2.5G Ethernet port automatically negotiates connection speeds, so you can easily connect to a 2.5G network when it is available. QoS support Quality of Service technology will make sure your bandwidth is always sufficient and lag-free. Stream content, play online games and enjoy smooth internet browsing.
TSW202 on esimene Teltonika Networks'i hallatav PoE+ kommutaator, mis on loodud selleks, et pakkuda granuleeritud võrgu haldamise võimalusi, tsentraliseerides samal ajal voolu jaotamist. See PoE+-lüliti võimaldab paindlikkust lahenduse haldamisel ja toiteallikaga varustamisel ning parandab M2M-sidet, toetades paljusid tööstuslikke protokolle, sealhulgas EtherNet/IP, Profinet ja MRP. TSW202-l on 2 suure jõudlusega SFP-porti pikamaa valguskaabelühenduseks ja 8 Gigabit Ethernet-porti, millest igaüks pakub 30 W võimsust. HALDATAVAD VAHENDIDL2 koos täiendavate L3-funktsioonidega täiustatud haldamiseks ja kontrollimiseksPOE+ JA SFP8-portiline PoE+ kommutaator koos 2 SFP-portiga valguskaabelühenduseks PROFINET JA MUUDToetab Profinet'i automaatseks andmetöötluseks koos teiste protokollidega, nagu EtherNet/IP ja MRP.TSWOSTeltonika Networks OS kommutaatoritele, intuitiivselt kujundatud lõpmatute konfiguratsioonide jaoks.
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
The MikroTik CRS320-8P-8B-4S+RM provides a reliable and efficient solution for network management with its robust design and extensive connectivity options. Featuring 17 ports capable of delivering Power over Ethernet (PoE++) and a strong PoE budget of 963 W, this switch ensures seamless power delivery to connected devices. It includes both 10/100/1000 Base-T connections and 2.5/10 Gbit SFP+ ports, facilitating versatile networking capabilities suitable for diverse environments, whether rack-mounted or desktop configurations.With a processor speed of 800 MHz and 256 MB of DDR3 SDRAM, this switch ensures optimal performance while handling network traffic. The built-in environmental monitoring features, such as voltage and temperature monitors, enhance system reliability, reducing the risk of downtime. With a minimum operating temperature of -10°C and a maximum of 50°C, this device is designed to perform under a variety of conditions, making it a valuable addition to any network infrastructure.
The Ubiquiti repeater and transceiver is designed to meet the demands of modern networking. This device offers a data transfer rate of 10 Gbps and supports 10 Gigabit Ethernet, making it suitable for environments requiring high-speed data transmission. With LC multi-mode connectors, it ensures a secure and efficient connection, while its ability to extend up to 300 m makes it versatile for various networking setups. Its plug-in module form factor allows for straightforward installation, integrating seamlessly into existing network infrastructures. Whether for business or advanced home networks, this Ubiquiti product is engineered to provide reliable, high-performance connectivity.
wAP ax: Fast and Reliable Wi-Fi 6 for Challenging Environments wAP ax brings fast and reliable Wi-Fi 6 to your countryside getaway or any other challenging environments – like a rural gas station or a bus stop. wAP’s legendary weatherproof form-factor has been tested for several generations all across the globe, and remains a favorite among MikroTik users for its simplicity and durability. A mighty dual-band, dual-chain (2x2 MIMO) radio ensures fast and reliable wireless connection both indoors and outdoors. Wi-Fi 6: More Than Just Speed Without a doubt – Wi-Fi 6 is much faster in both 2.4 GHz spectrum (speed increase up to 90%!) and 5 GHz spectrum (up to 40% faster!), but there’s so much more to it. Wi-Fi 6 offers significantly improved energy efficiency and security. OWE/WPA3-PSK/WPA3-EAP encryption and management frame protection help prevent all sorts of attacks, like brute-forcing and Deauthentication Attacks. And, if you have multiple wAP ax devices over a larger area, you’ll enjoy the improved seamless fast transition roaming – your devices will switch to the strongest signal… seamlessly! Enhanced Hardware for Uninterrupted Connectivity and Simple Management This compact access point is equipped with a modern dual-core ARM CPU and runs on RouterOS v7, ensuring stable internet and excellent VPN performance across your property. The wAP ax also supports our new CAPsMAN for easy centralized management of multiple devices with just a few clicks. The device features two Gigabit Ethernet ports, with PoE-in on one for flexible powering options. You can also use the standard DC jack – because we believe in giving you options. Stealthy Design – Weatherproof and Vandalproof wAP ax is designed to blend into any environment. Its simple, elegant design doesn’t attract any unwanted attention, making it perfect for busy public spaces or private properties alike. wAP can be securely fixed to any external wall or roof from the inside of the case, and there is an opening at the back of the case for running the Ethernet cable directly through the wall, keeping the setup extra discreet and secure.
CS4226-24ET-240 26-Port Cloud Managed Desktop Switch with 24-Port PoE (240 W) > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
TP-LINK Gigabit Smart Switch TL-SG2210P is equipped with 8 Gigabit RJ45 ports and 2 SFP slots, all RJ45 ports support the PoE standard with total PoE power budget of 53 W and useful PoE power management features. The switch provides high performance, enterprise-level QoS, useful security strategies and rich Layer 2 management features.TP-LINK's Gigabit Smart Switch TL-SG2210P is especially designed for the small and medium business networks that require efficient network management. TL-SG2210P comes with a comprehensive set of features, such as link aggregation group, 802.1Q VLAN, Access Control Lists (ACL), Quality of Service (QoS L2 to L4), storm control and IGMP snooping to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. What's more, its easy-to-use web management interface means faster setup and configuration with less downtime, providing the ideal solution for your business network.
