VDV & USB Cable Tester TC-NT3 (Version v1.0R) Comprehensive cable tester for network professionals Tests voice, data, video, and USB cables Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.) Identifies severed, short circuit, and cross connected pins Quick pass/fail for large test quantities Blinking Hub/Switch Mode identifies connected hub/switch port Convenient travel case TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port’s LED indicator to blink Cable Distance Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
TRENDnet’s 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch’s unused SFP slots for copper connectivity. RJ-45 Copper SFP Take advantage of unused SFP slots and repurpose them with RJ-45 copper Ethernet connectivity. Gigabit Speeds 1000BASE-T RJ-45 copper SFP spans distances up to 100m (328 ft.) and supports up to 1.25Gbps. Compatibility Compatible with a MSA compliant SFP slot and 1000BASE-T RJ-45 connections. Ethernet Distance Supports networking distances up to 100m (328 ft.) Connection Interface 1000BASE-T RJ-45 gigabit port Hot-Pluggable SFP Hot-pluggable SFP compatible with a MSA compliant SFP slot Operating Temperature Operating temperature range of 0°– 70 °C (0° – 158 °F)
TRENDnet’s TI-F10SC is a compact IP40 rated 100Base-FX fiber converter with hardened components rated for extreme industrial environments. It accommodates building-to-building or long distance networking with 100Base-FX Multi-Mode fiber over distances of up to 2 km (1.2 miles). Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.Andmeedastuskiirus (maksimaalne)200 Mbit/sKonverteri sisendi liides100Base-TXKonverteri väljundi liides100Base-FXVõrgustandardidIEEE 802.3,IEEE 802.3u,IEEE 802.3xEthernet-liidese tüüpKiire EthernetEthernet LAN-i andmeedastuskiirused10,100 Mbit/sEtherneti vaskkaablite tehnoloogia10BASE-T,100BASE-TXEtherneti kiudkaablite tehnoloogia100BASE-FXVoo reguleerimise tugiJahAutomaatne ühildumineJahDupleks-süsteemTäisversioon, PoolFiiberoptiline pistmikSCÜhenduvustehnoloogiaJuhtmega ühendatudEthernet LAN (RJ-45) pordid1Kiudjuhtme portide arv1Maksimaalne ülekandekaugus2000 mLainepikkus1310 nmKiustruktuurMultirežiimToetatud kiudkaabli läbimõõt62.5/125, 50/125Lingi bilanss7 dBKeskmine tõrkeintervall (MTBF)510304 hSisemineEiLED-indikaatoridJahToote värvMustKorpuse materjalMetallRahvusvahelise kaitse (IP) koodIP40DIN-liistu paigaldamineJahSisendpinge12-60Elektritarbimine (max)1,92 WKiirpaigaldusjuhendJahKasutamistemperatuur (T-T)-40 - 75 °CSertifikaatFCC, CELaius60 mmSügavus50 mmKõrgus35 mmKaal88 g
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 3m
GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
10/100/1000 ports with automatic detection of optimal network speed Auto-MDIX (auto uplink) support on all RJ45 ports For use as a desktop switch or for mounting in a 19" rack NWay autonegotiation support Store and Forward switch architecture Full/half duplex mode Support for 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode Green Ethernet power reduction technology deactivates unused ports and adjusts power levels based on cable length Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specification Bus bandwidth 48 Gbps Support for jumbo frames up to 9 KB MAC address table with up to 16k entries Memory buffer 512kB MAC address support with auto-learning and auto-aging functions Fanless design ensures quiet operation 19" rack mounts included Fully NDAA compliant
• 20 m • RJ-45 Sirge Meessoost • RJ-45 Sirge Meessoost • Cat6a S/FTP (S-STP) • 10 Gigabit Ethernet, Kiire Ethernet, Gigabit Ethernet 10000 Mbit/s • Power over Ethernet tugi Isehäälestuv • Roheline Equip 605649, 20 m, Cat6a, S/FTP (S-STP), RJ-45, RJ-45, Roheline
The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape.The ACGPSA is a standalone active GPS antenna, specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).Specifications: Center frequency1575.42 MhzGain26 dBWater resistance100% waterproof (IP67)ConnectorSMACable5 m RG-174/U (standard)Standard mountingMagnetic baseDC voltages3 V +-0.3 VDC current8 mA maxDimensions46.5 x 46.5 x 12.5 mmWeight35 g, 120 g (with cable and connector)Operating temperature-40°C .. +85°C tested
Elegant Industrial DesignAvailable in white or black, the sleek UniFi WiFi BaseStationXG is a versatile access point with multiple mounting options to suit your application. Designed for Stadiums and Event VenuesFeaturing maximum wireless performance combined with wireless security, the UniFi WiFi BaseStationXG is ideal for ultra high density environments, such as event venues, festivals, and stadiums, where there are numerous clients in a relatively small space. Superior Capacity for Large CrowdsFeaturing low-latency QoS (Quality of Service), the UniFi WiFi BaseStationXG supports up to 1500 clients with 12 MU-MIMO chains (500 clients with 4 MU-MIMO chains per client radio). RF Energy SteeringTrue cellular Wi-Fi using multiple APs – its selectable directional beamforming antenna allows for cell size optimization to maximize coverage.RF Channel FilteringProvides isolation for seamless parallel radio operation. Spectral Security The UniFi WiFi BaseStationXG delivers unprecedented wireless awareness and security, including tools for real-time spectrum monitoring, airtime utilization analytics, and intrusion detection/prevention. Using a persistent spectral scan, the AP constantly monitors the RF environment to check for both potential malicious activity and the best channel for network performance.
8 x Gigabit PoE+ ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules PoE power budget: 240W@48VDC or 124W@24VDC PoE alive check restarts unresponsive PoE powered devices 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024) TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. PoE Power A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Integration Flexibility Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Industrial Design Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Traffic Management Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Switching Capacity 20Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
