• Interactive features: touchback, annotation and blackboarding • Increased collaboration with 2 sources on screen • Run video meetings from your laptop with Button or App • 100% secure, encrypted and cloud-managed
MIKROTIK RouterBoard HAP LITE RB941-2ND Network Device Type Router Data Link Protocol Supports (New) LAN + Wi-Fi CPU Qualcomm QCA9531 CPU Core Quantity 1 Internal Clock Rate 650 MHz Installed Buffer Memory Storage Capacity 32 MB External Connection Type 1 x WAN (up to 100 Mbps) Wireless Networking IEEE 802.11b/g/n (2.4 GHz, up to 54 Mbps) LAN 3 (RJ-45) Supported Networking Compliant Standards IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.3 IEEE 802.3u Switching Layers Layer 4 Router Features WPS (Wi-Fi Protected Setup) Antenna Internal Device Location External WAN 1 (RJ-45) Power Device Location External Width (mm) 113 mm Height (mm) 89 mm Depth (mm) 28 mm External Colour White/Blue Package Type Box Maximum Operating Ambient Temperature 70 °C Minimum Operating Ambient Temperature -20 °C Warranty Products Returnable Yes Warranty Term (month) 12 month(s) Warranty Validation Criteria Serial Number Pack Weight Brutto (kg) 0.1 kg Pieces in pack 1 Box Weight Brutto (kg) 0.1 kg Packs in Box 1
High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
Usaldusväärne tööstuslik ruuter Teltonika RUT241 eSIM 4G tööstusruuter on mitmekülgne ja kompaktne võrgulahendus, mis on mõeldud tööstus- ja IoT-rakenduste jaoks. See 4G LTE ühenduvusega ruuter pakub kiiret ja usaldusväärset internetiühendust erinevates keskkondades, sealhulgas kaugemates kohtades ja mobiilsetes rakendustes. RUT241 on tänu oma vastupidavale konstruktsioonile ehitatud karmidele tööstustingimustele vastu pidama, mistõttu on see suurepärane valik tootmis-, automaatika-, turva- ja transpordivaldkonnas. Sisseehitatud eSIM-tehnoloogia kaotab vajaduse füüsilise SIM-kaardi järele, võimaldades kasutajatel vahetada erinevate operaatorite vahel eemalt ja tagada sujuv ühenduvus ülemaailmse võrguga ühilduvusega. RUT241 pakub kompaktses vormis tugevat jõudlust, olenemata sellest, kas seda kasutatakse esmaseks ühenduvuseks või tagavaralahenduseks. 4G LTE Cat 4 tehnoloogiaga varustatud Teltonika RUT241 eSIM ruuter pakub allalaadimiskiirust kuni 150 Mbit/s, tagades andmemahukate rakenduste sujuva toimimise. eSIM-funktsioon suurendab paindlikkust, võimaldades operaatorite vahetamist üle õhu, vähendades sõltuvust füüsilistest SIM-kaartidest ja lihtsustades võrgu haldamist. Lisaks mobiilsideühendusele sisaldab ruuter Wi-Fi 4 (802.11n) kohaliku traadita juurdepääsu jaoks, mis võimaldab mitme seadme samaaegset ühendamist. Traadiga Ethernet-port pakub täiendavaid ühendusvõimalusi tööstusseadmete, arvutite või väliste võrguseadmete jaoks. Olenemata sellest, kas RUT241 on kasutusel kaugseire, arukate linnarakenduste või tööstusautomaatika puhul, tagab see automaatse ümberlülitumise ja mitme WAN-redundantsuse võimaluse abil katkematu side. Tugev turvalisus ja vastupidavus Teltonika RUT241 eSIM pakub täiustatud tulemüüri konfiguratsioone, VPN-tuge (OpenVPN, IPsec, WireGuard) ja turvalist kaugjuurdepääsu. Marsruuter toetab mitmeid autentimismeetodeid, aidates ettevõtetel säilitada oma võrkude kõrgeid turvastandardeid. Kaugseire ja -juhtimine on tehtud lihtsaks Teltonika kaugjuhtimissüsteemi (RMS) abil, mis võimaldab kasutajatel seadmeid konfigureerida, jälgida ja tõrkeid kõrvaldada ükskõik kust. See tagab kiire reageerimisaja ja vähendab kriitiliste rakenduste seisakuid. Tänu sündmuste logimise, reaalajas toimivate hoiatuste ja kasutuse jälgimise toetusele saavad ettevõtted optimeerida võrgu tõhusust ja säilitada täieliku kontrolli oma ühenduvuse infrastruktuuri üle. RUT241i vastupidav alumiiniumist korpus on mõeldud karmide keskkondade jaoks, tagades vastupidavuse temperatuurikõikumiste, vibratsiooni ja elektriliste ülepingete suhtes. Laia töötemperatuurivahemiku (-40 °C kuni +75 °C) tõttu sobib see kasutamiseks tööstuslikes, välistingimustes ja sõidukitele paigaldatud rakendustes. Marsruuter toetab DIN-riba ja seinakinnitust, mis tagab paindliku paigalduse erinevate tööstuslike seadistuste jaoks. Tänu madalale energiatarbimisele ja võimalusele töötada passiivse PoE (Power over Ethernet) abil on RUT241 kuluefektiivne ja energiatõhus lahendus. Tänu kompaktsele suurusele ja suure jõudlusega võimekusele on see ideaalne valik ettevõtetele, kes otsivad usaldusväärseid, turvalisi ja skaleeritavaid võrgulahendusi nõudlikes keskkondades.
See Delocki korpus võimaldab paigaldada M.2 PCIe NVMe SSD-d 2280, 2260, 2242 ja 2230 formaadis, seda saab ühendada USB kaudu arvutiga või sülearvutiga. Vastupidav metallkorpus koos jahutusribadega ülaosas tagab mälu optimaalse temperatuuri. Spetsifikatsioon - Ühendused: välised: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane sisemine: 1 x 67-poolne M.2 võtme M pesa - Kiibistik: JMicron JMS583 - Toetab M.2-mooduleid formaadis 2280, 2260, 2242 ja 2230 koos M-klahviga või PCIe (NVMe) baasil võtmega B+M. - Komponentide maksimaalne kõrgus moodulis: 1,5 mm, toetatakse kahepoolselt kokkupandud moodulite rakendamist - Toetab NVM Express (NVMe) - Käivitatav - Andmeedastuskiirus kuni 10 Gbps - LED-indikaator toite ja juurdepääsu jaoks - Mõõtmed (LxSxK): ca. 102 x 34 x 12 mm - Hot Plug, Plug & Play Süsteeminõuded - Chrome OS - Linuxi tuum 4.6 või uuem - Mac OS 10.13.3 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu - Väline M.2 korpus - Kruvikeeraja - Paigaldusmaterjal - Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 30 cm - 1 x termoplaat - Kasutusjuhend
The TP-Link Omada EAP211-Bridge KIT V1 is a versatile network solution designed to meet the demands of both indoor and outdoor environments. With its rugged, weatherproof design and capability to operate in temperatures ranging from -40 °C to 70 °C, it ensures reliable performance in any setting. This wireless bridge supports a high data transfer rate of up to 867 Mbps on the 5 GHz band, facilitated by 2x2 MU-MIMO and beamforming technology for efficient, focused connectivity. Security is a priority, with multiple encryption algorithms and MAC address authentication to protect your network. Additionally, its cloud-managed feature simplifies setup and management, while advanced functions like Quality of Service (QoS) and VLAN support optimize network performance. Whether you're extending your Wi-Fi to cover large outdoor areas or ensuring robust indoor connectivity, the TP-Link Omada EAP211-Bridge KIT V1 is engineered to deliver.
The Zyxel XMG1915 Series is a comprehensive family of 2.5 Gbps intelligent managed switches, available in three models with and without Power over Ethernet (PoE) capabilities. Each Ethernet port on these models supports 2.5Gbps speeds, and they also feature two 10Gbps SFP+ ports to meet the growing high-speed networking needs of businesses.
"MikroTik RB962UiGS-5HacT2HnT, tuntud ka kui MikroTik hAP ac, on mitmekülgne ja suure jõudlusega traadita ruuter nii koduseks kui ka professionaalseks kasutamiseks. See kahesageduslik seade töötab AC-tehnoloogiaga, toetades samaaegset tööd 2,4 GHz ja 5 GHz sagedusalades, pakkudes kiiret ja usaldusväärset internetiühendust kogu teie ruumis. Sellel on viis Gigabit Ethernet-porti kiireks traadiga ühenduseks, mis muudab selle ideaalseks voogedastuseks, mängimiseks või muudeks ribalaiust nõudvateks rakendusteks. Marsruuteril on ka USB 2.0 port välise mäluseadme või 3G/4G-modemi jaoks ning üks SFP-port kiudoptilise ühenduse jaoks, mis annab võrku laiendamiseks võrratu paindlikkuse. Lisaks on viimasel Ethernet-portil PoE-väljund, nii et saate toita teist seadet ilma lisajuhtmeteta. "hAP ac on varustatud võimsa 720 MHz protsessori ja 128 MB RAMiga, nii et see saab hakkama suure koormusega ja säilitab optimaalse jõudluse. RouterOSiga eelinstallitud ruuter sisaldab täiustatud funktsioone, nagu tulemüüri kaitse, VPN-funktsioonid, kasutaja autentimine ja ribalaiuse haldamise vahendid. Selle kompaktne disain sobib igasse keskkonda, olgu see siis seinale, lakke või lauale paigaldatud. MikroTik hAP ac-ga saate usaldusväärse, funktsionaalselt rikkaliku ja kohandatava võrgulahenduse, mis vastab erinevatele vajadustele, lubades sujuvat ühenduvust ja täiustatud võrgulahendusi muljetavaldava hinnaga.
Stable 10 Gb/s data transfer without electromagnetic interference The installation F/FTP category Cat. 6a network cable eliminates the problem of slow transfer and interruptions in data transmission in local LAN networks. The shielded construction blocks external electromagnetic interference, guaranteeing a clean signal in offices and server rooms. The product supports a frequency band of up to 500 MHz, which sets it apart from standard solutions and ensures stability for demanding network applications. Key advantages Bandwidth up to 10 Gb/s – guarantees lightning-fast transfer of large files and smooth operation of systems. Double F/FTP shielding – completely cuts off external interference and eliminates crosstalk between pairs. 24 AWG pure copper conductors – ensure minimal signal attenuation and years of cable service life. Full compatibility with PoE, PoE+ and PoE++ – enables simultaneous powering of devices and data transmission over a single cable. 0.50 mm thick PE polyethylene sheath – protects the internal structure from mechanical damage. HDPE insulation – protects the copper conductors and guarantees appropriate dielectric parameters. Maximum performance thanks to conductive copper conductors The cable uses thick conductors with a diameter of 24 AWG made entirely from pure copper. The use of cheap CCA composite substitutes eliminates voltage drops and reduces cable heating under load. Pure copper maintains full signal integrity along the entire cable run, protecting the infrastructure from failures and costly downtime. Powering network devices through a single cable The pure copper construction offers full compatibility with PoE, PoE+ and PoE++ power standards. This solution delivers power directly to CCTV surveillance cameras, Wi-Fi access points or VoIP phones without the need for separate power lines. Using Extralink twisted pair cable reduces the cost of additional cabling and greatly simplifies equipment installation in hard-to-reach places. Lightning-fast data transmission in corporate networks The cable easily supports transmission speeds of 10 Gb/s, meeting the strict requirements of modern corporate networks. The bandwidth of the 10 Gigabit Ethernet standard shortens database copying times, eliminates delays during video conferences and enables smooth high-definition video streaming. It is the optimal choice for building a network backbone that will cope with growing internet traffic. Safe structured installation inside buildings The twisted-pair computer cable was designed for safe installation inside residential, office and commercial buildings. The outer sheath protects the installation when pulling it through cable trays and conduits. The product makes it easier to create stable subscriber points and fault-free connections between rack cabinets, guaranteeing the aesthetics and durability of the entire network installation. Advanced protection against internal interference The construction is based on 4 optimally twisted pairs, each with individual foil shielding. This solution completely blocks crosstalk between adjacent conductors inside the cable. An additional layer of HDPE insulation with increased density protects the cable mechanically and maintains a constant pair geometry, which translates into stable transmission parameters for many years.
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds. - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Manage the whole network locally or from the cloud via web UI or Omada app. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. - PoE+ Powered: Supports both Power over Ethernet (802.3at) and DC power supply for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP610
Powerful 10Gbps and Layer 3 Routing Solution for Enterprise Backbone and Data Center NetworkingPLANET GS-6311-16S8C4XR is a brand-new Layer 3 Managed Gigabit Switch with 10Gbps uplink capability for various kinds of network applications and flexible deployment. The GS-6311-16S8C4XR features 24 100/1000BASE-X SFP ports and 8 10/100/1000BASE-T RJ45 copper ports, shared with Ports 1 to 8, and 4 1G/10GBASE-X SFP+ ports with 128Gbps switch fabric delivered in a 1U rugged case design.The GS-6311-16S8C4XR provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 10Gbps interfaces and 128Gbps switching fabric, the GS-6311-16S8C4XR can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high-capacity servers. The powerful network security features make the GS-6311-16S8C4XR perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications. High Performance 10Gbps Ethernet CapacityThe four SFP+ ports built in the GS-6311-16S8C4XR boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as up to 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Each of the SFP+ ports supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.Redundant Ring, Fast Recovery for Critical Network ApplicationsThe GS-6311-16S8C4XR supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in harsh environments. In a certain simple Ring network, the recovery time could be less than 15ms to quickly bring the network back to normal operation.Layer 3 Routing SupportThe GS-6311-16S8C4XR enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.Strong MulticastThe GS-6311-16S8C4XR supports abundant multicast features. In Layer 2, it features IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1/v2 snooping. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions which make the GS-6311-16S8C4XR great for any robust networking. Full IPv6 Support The GS-6311-16S8C4XR provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.Robust Layer 2 FeaturesThe GS-6311-16S8C4XR can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the GS-6311-16S8C4XR allows the operation of a high-speed trunk combined with multiple ports. It enables up to 64 groups for trunking with a maximum of 8 ports for each group. Excellent Layer 2 to Layer 4 Traffic ControlThe GS-6311-16S8C4XR is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission. Powerful Network SecurityThe GS-6311-16S8C4XR offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based, MAC-based and web-based user and device authentications, which can be deployed with RADIUS, to ensure the port level security and block illegal users.Advanced IP Network ProtectionThe GS-6311-16S8C4XR also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.Efficient and Secure ManagementFor efficient management, the GS-6311-16S8C4XR is equipped with console, Web and SNMP management interfaces.With the built-in Web-based management interface, the GS-6311-16S8C4XR offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and the console port. For reducing product learning time, the GS-6311-16S8C4XR offers Cisco-like command and customer doesn’t need to learn new command from these switchesFor standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management.Moreover, the GS-6311-16S8C4XR offers secure remote management by supporting SSHv2 connection which encrypts the packet content at each session.Intelligent SFP Diagnosis MechanismThe GS-6311-16S8C4XR supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Seda Delocki kaablit saab kasutada USB-ühenduse pikendamiseks ja erinevate seadmete ühendamiseks. Naisliitmikud saab kinnitada kahe kruviga, nt pistikupesa, kaablikanal või vastava avaga korpuse külge. Nii on võimalik USB-pesa paigaldada kergesti ligipääsetavasse kohta. Spetsifikatsioon - Pistikud: 1 x USB 3.0 Type-A isane 1 x USB 3.0 Type-A emasliitmik koos paigaldusmutritega - Kruvitüüp: #4-40 UNC - Paigaldusava tüüp-A ca. 15 x 8 mm, kruvide augu samm ca. 30 mm - Andmeedastuskiirus kuni 5 Gbps - Kaabli läbimõõt: 30 AWG andmeliin 24 AWG toiteliin - Kaabli läbimõõt: ca 5 mm - Värv: sinine - Pikkus koos pistikutega: ca 1 m Süsteeminõuded - Vaba USB-port Pakendi sisu - USB-paneelile paigaldatav kaabel - 2 kruvi
Tri-band Mesh WiFi 7 kuni 14 Gbps kiirusega • 8 sisemist antenni laiale levialale • Kolm kiiret Etherneti porti paindlikkuseks • USB 3.0 port FTP- ja meediapleieritele • Lihtne haldamine Deco rakendusega
These cable ties from Delock can be used for a space-saving bundling of single cables, wires and tubes. By using the strap, you can fix the cable tie to a cable, so that the cable tie won’t get lost. The cable ties can be applied easily and can be simply removed due to the hook-and-loop fastener. The cable ties are reusable multiple times. Specification • Length: ca. 200 mm • Width: ca. 12 mm • Quantity: 10 pieces per poly bag • Strap for fixation to the cable • Hook-and-loop fastener for multiple reuse • Colour: black Package content • Cable ties set
USB-C – MagSafe 3 laadimiskaabel MagSafe 3 ühendusega Apple MacBook sülearvutitele Toetab kuni 140 W laadimisvõimsust Vastupidav punutud ümbris Pikkus: 200 cm
Work with the best. The Fluke 325 True-rm Clamp Meter offers big features in a small form factor. Fluke rugged. Fluke reliable. Fluke precise. True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 325 also offers DC current and frequency measurements. Measurement capability 400 A ac and dc current measurement 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kΩ with continuity detection Temperature and capacitance measurement Frequency measurement Features Slim, ergonomic design Large, easy to read backlight display CAT IV 300V/CAT III 600 V safety rating Hold button Two-year warranty 325 True-rms Clamp Meter Included accessories Test leads Soft carrying case User's manual
