Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.
The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in. In comparison with previous model RB751G-2HnD, it has more powerful 600Mhz CPU (instead of 400Mhz), more RAM - 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided. Package contains RouterBOARD 951G-2HnD in a plastic case and power adapter.
The RB912UAG-5HPnD is very versatile device. It's small wireless router with an integrated high power wireless card and an additional miniPCIe slot for 802.11 wireless, or 3G card. The Gigabit port helps to utilize the full potential of 802.11n wireless speeds. The integrated wireless card is capable of up to 1000mW output power. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports.
5GHz, 38", 34.2dBi dual pol. antenna, need Rocket M5.Carrier Class Performance. Breakthrough Price Points. Instantly pair with Rocket M5 to create powerful 2x2 MIMO PtP Bridging applications. Rocket mount and weatherproof RF jumpers included.Rocket M Seamlessly Integrates with Rocket Dish Antenna. Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.
The RB400L is low cost series. The RB411L has one miniPCI slot and one Ethernet port. Use this device in an outdoor case for a CPE device, or a point to point wireless link installation. The miniPCI slot allows you to choose your own preferred wireless card model. It’s powered by an Atheros 300MHz CPU and has 32MB of RAM and a Level3 RouterOS license. Differences between RB411 and RB411L can be seen in the file "RB400L differences" which you can download in the left side menu.
The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat5 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 1pc.
The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat5 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 100pcs.
RouterBOARD 411 with 300MHz Atheros CPU, 32MB RAM, 1 LAN, 1 MiniPCI, 1 MiniPCIe, 1 USB slot, RouterOS L4.The RB411U is a versatile yet very small device. It includes all - a miniPCI slot, a USB 2.0 port and a miniPCI-E slot for connecting a 3G card. A SIM card slot for 3G is also present on the RB411U.RB411U includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a mobile 3G router, and more - all at the same time.One small device - with all the power of RouterOS. At a very special price. SpecificationsCPU Atheros AR7130 300MHz embedded processorMemory 32MB SDRAM onboard memory chipBoot loader RouterBOOTData storage 64MB onboard NAND memory chipEthernet ports One 10/100 Mbit/s Fast Ethernet port supporting Auto-MDI/XMiniPCI slot One MiniPCI Type IIIA/IIIB slotOne MiniPCIe slot for 3G modem (onboard SIM connector)Wireless not built in, possible by adding a miniPCI cardExpansion USB 2.0 with 5V 1A supplyExtras Reset switch, Beeper, Input voltage monitorSerial port One DB9 RS232C asynchronous serial portLEDs Power, NAND activity, 5 user LEDsPower options Power over Ethernet: 10..28V DC (except power over datalines).Power jack: 10..28V DCPower Consumption 3-12WTemperature Operational: -20°C to +70°C (-4°F to 158°F)Humidity Operational: 70% relative humidity (non-condensing)Currently supported OS RouterOS 3.x, Level4 license included
High power 4920-5920MHz 802.11a/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
3-Axis Positioning SystemBased on ball hinge, 3-Axis positioning is essential feature of NanoBracket Series. NanoBracket SEXTANT enables elevation and azimuth change in range of 50° and full 360° antenna rotation.Easy Installation2nd generation of ball hinge based 3-Axis Positioning System is easy to install. The ease of installation is uncomparable to anything on the market today. NanoBracket SEXTANT enables installation on the Wall or on the Pole.Built To LastNanoBracket SEXTANT is made of diecast aluminium and high quality ABS plastic. All screws are made of Stainless Steel.
Liimipõhjaga kummijalad, sobivad näiteks elektroonikaseadmete korpusetele. Kummijalad on saadaval eri suurustes, kujuna ja värvidena. Põhivärvid on hall ja must. Materjal polüretaan (väga hea libisemiskindlus). Liimkinnitus on lihtne ja kiire võrreldes kruvikinnitusega jm. Ei kriimusta pinda, ei jäta jälgi. Liimitavad paljudele enamlevinud pindadele.
Liimipõhjaga kummijalad, sobivad näiteks elektroonikaseadmete korpusetele. Kummijalad on saadaval eri suurustes, kujuna ja värvidena. Põhivärvid on hall ja must. Materjal polüretaan (väga hea libisemiskindlus). Liimkinnitus on lihtne ja kiire võrreldes kruvikinnitusega jm. Ei kriimusta pinda, ei jäta jälgi. Liimitavad paljudele enamlevinud pindadele.
Scotch Super 33+ on T1-klassi elektriteip. Mõeldud juhtmete ja kaablite elektriühenduste isoleerimiseks kuni 600V ja max 105°C. Omadused: • Väga hea mehaaniline vastupidavus, samuti niiskusele, kemikaalidele. UV-kindel. • Väga head elektrilised omadused Tehnilised andmed: (ASTM D1000): • Värv: must • Materjal: PVC • Paksus: 0,18 mm • Murdumiskindlus: 250 % 22 °C, 100 % -18°C • Kleepuvus: 794 g/25 mm, teras • Temperatuurivahemik: • Paigaldamine: min -18°C (CSA) • Pidevalt: max105°C (CSA), 80°C (UL510) • Tulekindlus: isesumbuv (UL510) • Läbilöögipinge: 8750 V • Sertifikaadid: UL 510, CSA, FI Paigaldamine. Scotch Super 33+ paigaldatakse samamoodi kui vinüülteipe üldiselt. Mähkige vähemalt kaks kihti 50% kattuvusega. Venitage veidi teipi enne mähkimist, et teip jääks tihedalt vastu isoleeritavat pinda. Viimast kihti mitte venitada, see väldib teibi lahtikerimist. Valige sobiv teibi tüüp vastavalt ümbritsevale temperatuurile. Tavatingimustes võib kasutada ka odavamat T2 klassi elektriteipi Scotch 710 või T3 klassi Temflex 1500. Raskemates tingimustes kasutage paksemat Scotch Super 88 elektriteipi.
Main Features Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector Provides 1 x 100 Mbps multi-mode/single-mode SC type fiber port Provides internal jumper for Link Fault Pass-through (LFP) setting Supports full/half duplex flow control Supports store and forward transmission Supports auto-negotiation Supports MDI/MDI-X auto crossover Supports redundant +12-48 VDC power input Provides flexible mounting: DIN-rail & Panel Mounting Supports wide Operating Temperature from -40 ~ 75° C Datasheet
Enable the power management of 8 devices through an RS232 terminal connection. The S8 Slave is power distribution and control unit that can be used either as a slave to the M8 or connected to the AdderLink IP (and other Adder KVM switches*) to provide total remote control of connected servers and their associated power supplies. Power can then be recycled across a number of ports and selected securely from an integrated On-Screen-Display menu. Controlled power outlets can be extended up to 32 by cascading up to four slave models using one RS232 connection (total load 80 A / 230 V). Two separate power inputs improve security and increase total current load (20 A or 230 V) Built-in serial interface allows easy control using simple ASC11 commands (can be used by any server or KVM switch to individually control the 8 power outlets Sequenced power start ups and shut downs outlet by outlet reduces inrush currents Front panel LEDs provide quick status checks Number of controlled outlets can be extended by cascading
