Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C), RJ45 plug Wiring type: FTP/STP - shielded 4 twisted-pair kaabel, CAT5 Lisaandmed: bag of 100tk kõrgus: andmed puuduvad laius: andmed puuduvad pikkus: andmed puuduvad
16-Port Managed Gigabit Ethernet PoE+ Switch with 2 SFP Slots Compliant with IEEE 802.3at/af Power over Ethernet (PoE+/PoE), 374W, Endspan, 19" rack The most important thing It enables power supply and data transmission of up to 16 PoE network devices It saves time and money by using existing network cables for power and data transmission Powered Device Monitor (PDM) restarts any connected PoE device that is not responding or sending network traffic information.
Now with airOS®8 and airView® airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional AntennaThe LiteBeam AC LR provides 26 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.Breakthrough Industrial DesignFeaturing the freedom of three-axis alignment, the LiteBeamM fully assembles in seconds – no tools needed. Only a single wrench is required for pole-mounting.
Tootja: Lanberg Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5e, Shielded Lisaandmed: Set of 100 tk of shielded RJ-45 [8P8C] Cat.5E võrguseade plugs, intended mainly, for FTP LAN kaablid. värv: Metal
The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside. This means that once the device is secured, there is no easy way to unplug cables, or move the device.
UVC-G3-F-C Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. Features: Low-profile installationRequires 2 1/8" inch cutoutIncludes drywall mounting anchorsIncludes retainer for ceiling tile mountOptional security screw locks camera to mount* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes. See ühildub täielikult GSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth ja LoRa 868 MHz / 915 MHz.SpetsifikatsioonÜhendused: 2 x SMA pistik: 2 x SMA pistikGSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth, ISM,LoRa 868 MHz / 915 MHz, MIMOSagedusvahemik:698 - 960 MHz1710 - 2700 MHzAntenni võimendus: 8 dBiImpedants: 50 OhmVSWR: 2,0Polarisatsioon: vertikaalne, horisontaalneHBW horisontaalne kiirteelaius: 75°VBW vertikaalne kiirguslaius: 65°.Kaabli tüüp: RG-58Kaabli pikkus koos pistikutega: ca. 10 mTöötemperatuur: -40 °C ~ 65 °CKorpuse materjal: ABSKaal: ca. 0,7 kgMõõtmed (LxSxK): ca. 23,7 x 22,9 x 5,0 cmMax. Poldi läbimõõt: ca. 5,5 cmSüsteeminõudedSeade kahe vaba SMA-liitmikugaPakendi sisuAntenniPaigaldusmaterjal:Mutter, seibid, kinnitusklamber ja posti kinnitusmaterjal: mutter, seibid, kinnitusklamber ja posti kinnitusklamber
QuSpot for Teltonika RUTX11 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + Bluetooth antenna + place to install Teltonika RUTX11 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX11 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It also has embedded Wi-Fi dualband 2.4 & 5 GHz omni antenna, GPS antenna and Bluetooth antenna. If you use RUTX11 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
Schutzkontakt-Steckdosenleiste, mit drei Anschlüssen, Überspannungsschutz bis zu 13.500 A, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Funktionskontrollleuchte, Stecksystem DE (Stecker-Typ F)
Powerful UniFi Protect-ready LED floodlight with a long-distance motion sensor.Smart managed floodlight with integrated motion detection and light sensor. Housed in a compact sleek design for low profile mounting. Easily setup and configure the UP-FloodLight with the UniFi Protect App.Features: Integrated motion and light sensors for floodlight control and management Detects motion at up to 5 meters Provides 550 Lumens of intense LED light PoE input (802.3 af) Durable IPX5 waterproof housing Easy setup and configuration with the UniFi Protect Mobile App Included Wall Mount Angle Mount and Screw Kit UniFi Protect is required to run this product with full functionality. Recommended using it with the UniFi Dream Machine Pro or the UniFi Protect Network Video Recorder.
Router mit integriertem Modem bis max. 100 Mbit/s, DECT-Basis für bis zu sieben Telefone, RJ-11/TAE-Port für analoges Telefon, WLAN-Geschwindigkeit bis zu 300 Mbit/s, 6000V-Blitzschutz
