Features next-generation Bluetooth 6.0 with BLE for ultra-efficient, low-power wireless connectivity Built with LE Audio technology to deliver enhanced audio clarity while minimizing power consumption Supports seamless connection with up to 7 devices Ultra-small design for unmatched portability
A42G-HBEP | Dual-band (2.4 GHz / 5 GHz) | Wi-Fi 7 (802.11be) | Ethernet LAN Yes | Ethernet LAN interface type 2.5 Gigabit Ethernet | 4xEthernet LAN (RJ-45) ports | USB port Yes | Operating temperature (T-T) -40C to +50C C
SpecificationsOutput Voltage 48 VOutput Rating 0.5A (24W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
Industrial LTE Cat 1 Gateway Board TRB145 is equipped with RS485 Interface, Digital Inputs/Outputs and micro-USB port. TRB145 compact design makes this Gateway perfect for an application where a sole gadget must be remotely controlled over RS485 interface. TRB145 is engineered to be used in Industrial applications therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.HardwareMobileLTE(Cat1)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTERS485Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200Input/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketOptional power sourcePossibility to power device over 6 pin RS485 connector’s spare terminals.Configuration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)RS485 related servicesModbus, Serial over IP, NTRIPRemote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight30 g
The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside. Special rackmount ears for installing unit into the standard rack are provided.Switching resultsCRS309-1G-8S+IN ModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput6,583.279,946.719,032.077,954.9120,535.761,714.3SwitchingNon blocking Layer 2 capacity6,583.2159,893.419,032.0155,909.8120,535.7123,428.6SwitchingNon blocking Layer 1 throughput6,583.281,000.019,032.081,000.0120,535.781,000.0SwitchingNon blocking Layer 1 capacity6,583.2162,000.019,032.0162,000.0120,535.7162,000.0Ethernet test resultsCRS309-1G-8S+IN98DX8208 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)217,52641.3231,1946.6243,6124.7Bridging25 bridge filter rules117,41425.7117,4480.9145,274.3Routingnone (fast path)207,62521.1217,6891.3229,5117.5Routing25 simple queues121,11470.6122,7502.6145,274.3Routing25 ip filter rules83,61015.283,1340.488,945.5
300Mbps Enhanced Wireless N Router Maximum coverage – four 5dBi antennas provide up to 500m2 of wireless coverage Enhanced signal – high gain antennas dramatically increase wireless signal strength, size and stability 300Mbps wireless speed - ideal for HD streaming, online gaming, and large file downloads Easy installation - intuitive webpage guides you through the setup process in minutes *Range specifications are based on performance test results. Real performance varies in accordance with applications and environmental conditions.
The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen compact size and fanless design. The touchscreen displays the current switch state and information for quick diagnosis. Managed and configured by the UniFi Network Controller with UniFi mobile app support the USW-24 switch offers an extensive suite of advanced Layer 2 switching protocols and features including operating mode (switching mirroring or aggregate) per port.Managed by UniFi Network Controller version: 5.12.32 or higher.
4G LTE CAT12 Download up to 600 Mbps. Upload up to 150 Mbps WIFI & BT Wave-2 802.11ac Dual Band WIFI and Bluetooth LE DUAL SIM With auto failover, backup WAN and other switching scenarios LOAD BALANCING Allows to use multiple WAN sources to increase throughput GNSS Global Navigation Satellite System for location services with geofencing functionality RMS Compatible with Teltonika Remote Management System // RUTX14 is the fastest single modem LTE router in our portfolio. // 5 x Gigabit Ethernet ports, Wave-2 802.11ac Dual-Band Wi-Fi, Bluetooth LE, USB interfaces, dual SIM for advanced throughput and ultra-reliable connectivity. // Equipped with advanced security features like multiple VPN's, firewall & cyber attack prevention. // Combination of fast LTE CAT12 connectivity, wide range of physical interfaces, extensive RutOS functionality and great remote management capabilities make this device an excellent choice for primary or backup connectivity
UniFi Switch Enterprise 48 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 320 Gbps (48) 2.5-Gigabit LAN ports and four SFP+ (10 Gbps) slots. All Ethernet ports support 802.3af/at PoE-Out with an output power of 30 W/port and total PoE budget of 720 W. In addition to the standard equipment the switch also has a 1.3" touch screen for providing information about the system temperature port statistics PoE power supply and much more. The switch can be powered via standard 230 V but also via UniFi SmartPower RPS which rather backs up power in the event of an internal power failure.USW-Enterprise-48-PoE does not have web management but is managed centrally by UniFi Controller with support for the UniFi mobile application. It offers an extensive set of advanced switching protocols and L2 functions including operating mode (switching mirroring or aggregation) per port. UniFi Network Controller and mobile applications allow administrators to configure and monitor virtually all graphical user interface functions from anywhere.This generation of switches supports redundant power supply via a special connector to the UniFi SmartPower unit in the event of a failure of the primary power supply at the switch.
Ubiquiti UXG-Max on täiustatud ruuter, mis on loodud pakkuma suure jõudlusega võrguühendust nõudlikes keskkondades. Selle kompaktne vorm, võimas töötlemisvõime ja mitmekesised võrguvõimalused muudavad selle ideaalseks kaasaegsetele ettevõtetele. Seade pakub tugevat turvalisust, kiiret ühenduvust ja suure läbilaskevõimega jõudlust, tagades sujuva ja turvalise töö igas suuruses ettevõtetele.Peamised spetsifikatsioonid:Mehaaniline:Mõõtmed: 141.8 x 127.6 x 30 mm (5.6 x 5 x 1.2 tolli)Kaal: 520 g (1.1 lb)Korpuse materjal: PolükarbonaatVastupidavus: IK04Riistvara:Protsessor: Neljatuumaline ARM Cortex-A53 1.5 GHzMälu: 2 GB DDR4Haldusliides: Ethernet, BluetoothLAN-pordid: (4) 2.5 GbE RJ45WAN-pordid: (1) 2.5 GbE RJ45IDS/IPS läbilaskevõime: 1.5 Gbps (iPerf3 mõõtmisega DHCP WAN-il; jõudlus võib varieeruda PPPoE korral sõltuvalt ISP rakendusest)Toide ja LED-id:Toiteviis: USB tüüp-C (5V/3A)Maksimaalne energiatarve: 9.6WLED-id: Ethernet (Valge - link/aktiivsus)Tehase lähtestamise nuppKeskkonnatingimused:Töökeskkonna temperatuur: -10 kuni 40°C (14 kuni 104°F)Töökeskkonna niiskus: 5% kuni 95%, mitte kondenseeruvSertifikaadid: CE, FCC, ICLüüsi omadused:Jõudlus: Toetab WiFi QoS-i koos UniFi AP-dega, rakenduse, domeeni ja riigipõhist QoS-i ning internetikvaliteedi aruandlust.Järgmise põlvkonna turvalisus: Sisaldab rakendusteadlikku tulemüüri, IPS/IDS-ohtude tuvastamist, sisufiltreerimist ja olekutundlikku tulemüüri.Täiustatud võrk: License-free SD-WAN, WireGuard, L2TP ja OpenVPN serveri ja kliendi tugi, Teleport VPN, kohandatav DHCP ja IPv6 ISP tugi.
The Ubiquiti UniFi Device Bridge Pro is designed to provide robust wireless connectivity in various environments. With an antenna gain level of 19 dBi and support for advanced wireless protocols like IEEE 802.11a/n/ac, this device ensures strong signal transmission over long distances. It has a range of up to 5 km in open space, suitable for applications where network extension is essential.This device is built to withstand extreme conditions, operating in temperatures from -40°C to 60°C and humidity levels between 5% to 95%. The weatherproof, UV-resistant casing protects the internal components, making it a reliable option for outdoor installations. Equipped with Power over Ethernet (PoE) capabilities and efficient performance reaching up to 867 Mbps on the 5 GHz band, the Ubiquiti UniFi Device Bridge Pro is an effective solution for establishing a resilient wireless bridge.
The DAP140 is a Teltonika industrial wireless access point with passive PoE-in, designed to enhance Wi-Fi coverage and performance in industrial environments. Featuring Wi-Fi 4 with Wi-Fi mesh and Fast Roaming, as well as dual RJ45 ports and support of up to 50 simultaneous connections, this wireless access point is integral in maintaining reliable connectivity. An integrated DIN rail bracket, 3-pin power connector, and industrial-grade aluminium housing make the DAP140 the ideal access point for industrial applications.
The Ubiquiti UniFi U7 Pro is a formidable solution in the realm of network devices, offering reliable wireless performance and security. This wireless access point leverages Wi-Fi 6 technology to deliver high-speed Internet access across 2.4 GHz, 5 GHz, and 6 GHz bands, accommodating a broad spectrum of wireless clients. With the capacity to support over 300 devices and 8 BSSIDs, it is perfectly suited for environments with high-density wireless demands.Security is a priority for the Ubiquiti UniFi U7 Pro, featuring robust encryption protocols such as WPA, WPA-Enterprise, WPA-PSK, WPA2, and WPA3 to protect against unauthorized access and ensure safe data transmission. Its durable metal housing and ability to operate in extreme temperatures from -30°C to 60°C make it a reliable choice for any setting, from offices to outdoor spaces. Additionally, the device's support for advanced network management features like 2x2 MIMO technology, Advanced QoS, and VLAN support, further enhances its appeal by offering efficient network optimization and user experience.
2.4GHz, 29.4x8x3cm, 11dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.50+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 11dBi dual-polarity gain at 2.4GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
TRM240 is an Industrial LTE Cat 1 Modem with rugged aluminium housing, USB interface and external antenna for better signal coverage. This product is backwards compatible with 3G and 2G technologies and is the most cost-efficient option for upgrading existing industrial and public infrastructure with modern M2M connectivity.Industrial Cellular LTE Cat 1 Modem TRM240 is a compact and simple connectivity device able to provide cellular capabilities to equipment across all market segments. It is backwards compatible to 3G and 2G therefore it is the universal choice when it comes to large scale connectivity upgrades for Industrial or Public infrastructure. It offers long and stable lifecycle important for IIoT projects, because you can use conventional cellular technologies and enjoy more cost-efficient data plans using LTE Cat 1. TRM240 comes with USB interface for power & communication, drivers supporting all relevant platforms and one SMA connector for an external antenna to obtain better signal coverage.
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Abbreviated kirjeldus: SUPERSPEED USB-C10 GBPS SPEEDSTER 4 HUB External värv: Gray liides13 m USB 3.2 Gen 2: 1: 1(USB 3.2 (type C)) USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) laius (mm): 40 mm kõrgus (mm)12 mm sügavus (mm): 87 mm Nominal kaal1Box kaal Brutto (kg): 5.6 kg Retail Packaging Netokaal Carton1
AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)
