AX1800 kahesageduslik PCI-E WiFi 6 (802.11ax). Bluetooth 5.2, WPA3 võrguturve, OFDMA ja MU-MIMO- Next-Gen WiFi standard – WiFi 6 (802.11ax) standard parema tõhususe ja läbilaskevõime tagamiseks. - ülikiire WiFi-kiirus –1800 Mbps WiFi-kiirus, et hõlpsalt toime tulla ka kõige aktiivsema võrguga. - 802.11ax tehnoloogia - OFDMA ja MU-MIMO abil võimaldab WiFi 6 tõhusamat, stabiilsemat ja kiiremat edastust isegi siis, kui andmeid edastab korraga mitu seadet. - Bluetooth 5.2 kiiremaks ja edasiseks katmiseks - Bluetooth 5.2 ei võimalda mitte ainult edastada andmeid kuni kaks korda kiiremini kui varem ja 4X levialaga pikendab see ka akut ja parandab helikvaliteeti. - Uusim WPA3 võrguturve – pakkudes teie arvutile täiendavat kaitsekihti väliste rünnakute eest, et anda teile meelerahu. Tüüp Adapter Andmeedastuskiirus 1800 Mbps, IEEE 802.11ax Juhtmeta sagedusvahemik 2,4 GHz / 5 GHz, MIMO tugi
Deco X10 on AX1500 terviklahendusega silmusvõrk (mesh) Wi-Fi 6 süsteem, mis pakub kiiret ja stabiilset internetiühendust kogu kodus. See suudab ühendada rohkem seadmeid ning tagab sujuva ja katkestusteta katvuse tänu Wi-Fi 6 tehnoloogiale. • Wi-Fi 6 kiirus kuni 1500 Mbps • OFDMA ja MU-MIMO tehnoloogia • Sujuv kogu kodu katvus (kuni 520 m 2 ) • Väga madal latentsus • Ühtne võrk • Tugevad vanemlikud kontrollid • Lihtne seadistamine Deco rakendusega
As demands for connection from networking devices such as IP phones, IP cameras and access points increase, deployment complexity and cost rise as well. For less cable usage and investment, Power over Ethernet (PoE) technology provides both data connection and electrical power to devices through just one cable without power-socket restriction. Featured with the benefits of PoE technology, Zyxel's PoE Injectors, PoE12-30W, all provide super-fast LAN connectivity with high-power budget; easily connect to PoE devices over Cat 5e or above cable. The PoE12-30W supports PoE+ and PoE++ standards respectively, both ensure interoperability with other standard-based PoE-capable devices.
MT110 4G LTE Mobile Wi-Fi - More Connections: Share with friends internet access for up to 10 devices simultaneously - Long usage: 2200 mAh battery for 10 hours - 4G Network: Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions, and enjoy download speeds of up to 150 Mbps - 150 Mbps WiFi: Fast WiFi speeds up to 150 Mbps to share your network - SIM Card Plug and Play: Go anywhere and connect everywhere easily - Easy App Control: Management with the MERCUSYS App
wAP LTE kit is a tiny weatherproof wireless access point for installation outside your house, in the garden, on your porch, or in any other challenging environment where you need a capable wireless connection on the tightest budget possible. It features an Ethernet port with passive PoE-in, but there are more ways to power this affordable access point: there’s also a standard DC jack and an automotive plug. The new revision features a new LTE modem that offers improved connectivity, the addition of the popular B28 band, and a massive price drop! wAP LTE kit is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw, which can only be opened by the owner. There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP attracts less attention and blends into any environment.
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
The Ubiquiti UniFi U7 Pro is a formidable solution in the realm of network devices, offering reliable wireless performance and security. This wireless access point leverages Wi-Fi 6 technology to deliver high-speed Internet access across 2.4 GHz, 5 GHz, and 6 GHz bands, accommodating a broad spectrum of wireless clients. With the capacity to support over 300 devices and 8 BSSIDs, it is perfectly suited for environments with high-density wireless demands.Security is a priority for the Ubiquiti UniFi U7 Pro, featuring robust encryption protocols such as WPA, WPA-Enterprise, WPA-PSK, WPA2, and WPA3 to protect against unauthorized access and ensure safe data transmission. Its durable metal housing and ability to operate in extreme temperatures from -30°C to 60°C make it a reliable choice for any setting, from offices to outdoor spaces. Additionally, the device's support for advanced network management features like 2x2 MIMO technology, Advanced QoS, and VLAN support, further enhances its appeal by offering efficient network optimization and user experience.
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
Switch NETGEAR ProSafe GS105 (5 x 10/100/1000Mbps, Desktop, Auto-sensing per port) Retail Installed Buffer Memory Storage Capacity 128 KB Number of Ports 5 x 10Base-T/100Base-TX/1000Base-T (Ethernet/Fast Ethernet/Gigabit Ethernet) Switching Protocol Ethernet Switching Method Store and Forward MAC Address Table Size 4K Status Indicator Activity Status Networking Compliant Standards IEEE 802.1p(QoS) IEEE 802.3ab IEEE 802.3u IEEE 802.3i Networking Features Auto-sensing per port Device Location External Mounting Capability Desktop Certifications C-Tick, CE Mark, FCC Class B, VCCI Class B Ethernet 10Base-T/100Base-TX/1000Base-T Port Quantity 5 Ethernet 10Base-T/100Base-TX/1000Base-T Port Connector Type RJ-45 Power Device Location External Maximum Power Consumption 3.5 W Depth (mm) 104 mm Height (mm) 28 mm Width (mm) 94 mm Nominal Weight 0.3 kg Package Type Retail Maximum Operating Ambient Temperature 50 °C Maximum Operating Humidity 90 % Minimum Operating Ambient Temperature 0 °C Minimum Operating Humidity 10 % Mean Time Between Failures 1000000 hr Warranty Products Returnable Yes Warranty Term (month) 99999 month(s) Warranty Validation Criteria Serial Number Pack Weight Brutto (kg) 1 kg Pieces in pack 1 Packs in Box 10
Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STR / RSTP / MSTP• Access Control List• MikroTik neighbour discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• SNMP v2/v3• rackmount• IEEE 802.3ad and static link aggregation Switching resultsCRS328-24P-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-24P-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
8-Port 10/100/1,000 Mbps Desktop Switch Eight 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
MikroTik Cloud Router Switch CSS610-8P-2S+IN No Wi-Fi, Router Switch, Rack Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 8, Mesh Support No, MU-MiMO No, No mobile broadband, SFP+ ports quantity 2
RB5009UPr+S+OUT An outdoor version of our best-selling heavy-duty PoE router. Extensive power redundancy for the best price! 7x Gigabit Ethernet ports, 1x 2.5 Gigabit Ethernet, 10G SFP+, 1GB of RAM, 1GB NAND, modern quad-core CPU, 9 (!) powering options, durable IP66 waterproof enclosure.
Mobiilne 4G-ruuter tööstuslikele IoT-rakendustele, mis toetab jadaliideseid RS232 ja RS485, MQTT, BACnet, I/O-d, Ethernet ja muud. See mobiiliruuter on varustatud GNSSi ja tõrkekindlate funktsioonidega, nagu Dual SIM, automaatne katkestus ja WAN-i varukoopia. ÜHENDUS4G LTE (Cat 4), 3G, 2GDUAL SIMAuto-failover, varu WAN ja rohkem lülitusstsenaariumeLIIDESED JA PROTOKOLLIDSeeriaviisilised liidesed (RS232 ja RS485), MQTT, BACnet, OPC UA, I/O, Ethernet ja palju muud.GNSSNTRIP, asukohateenused ja ajasünkroniseerimine
JetStream 16-Port 10GE SFP+ L2+ Managed Switch 16× Full 10GE SFP+ Slots: Lightning-fast full 10 Gbps SFP+ slots provide high-bandwidth aggregation connectivity and non-blocking 320 Gbps switching capacity. Learn More about TP-Link 10G/Multi-Gigabit Switching Solutions Abundant L2 and L2+ Features: Supports a complete lineup of L2 and L2+ features including Static Routing, enterprise-level QoS, IGMP Snooping, and more. Robust Security Strategies: Helps protect LAN area investment with integrated IP-MAC-Port Binding, ACL, Port Security, 802.1X Authentication, and more. Dual Redundant Power Supplies: Two power supplies backing each other up make it an ideal choice for reliable networking architecture. Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management. Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
RUT140 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil tagab see sujuva ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstusprotokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga tõhusaks kaug- ja kohapealseks haldamiseks.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4 TOITEPINGE1 x 3-poolne tööstuslikuks kasutamiseks kohandatud toitepistikupesaLIHTNE PAIGALDAMINELihtne paigaldus integreeritud DIN-riba klambrigaRMSKaugjuhtimine, juurdepääs ja VPN-teenused
The TP-Link Omada EAP673 V1 is a wireless access point designed to meet the demands of modern businesses and high-density environments. Offering Wi-Fi performance with Wi-Fi 6 technology, this device supports a data transfer rate of up to 5378 Mbps, ensuring smooth and efficient operation. It can handle over 250 concurrent clients, making it perfect for large gatherings or busy workplaces.Security is a top priority for any network, and the EAP673 V1 excels in this area. It features the WPA3 encryption standards, along with multiple authentication methods, to protect sensitive data from unauthorized access. Additionally, its cloud-managed capability allows for effortless setup, management, and updates, ensuring your network remains robust and secure.Designed for versatility, the TP-Link Omada EAP673 V1 is suitable for wall or ceiling mounting, allowing for optimal placement and coverage. Its robust design is complemented by features such as MU-MIMO technology, beamforming, and seamless roaming, which together provide a superior wireless experience. Whether you're upgrading your office network or setting up a new one, the EAP673 V1 is a powerful and reliable choice.
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
Xiaomi Mesh System | AC1200 EU (1-pack) | 802.11ac | 867 Mbit/s | 10/100/1000 Mbit/s | Ethernet LAN (RJ-45) ports 2 | Mesh Support Yes | MU-MiMO No | No mobile broadband | Antenna type Internal
The Ubiquiti UniFi U7 Pro Wall redefines the standard for wireless network performance and security. Designed to cater to the demands of high-density environments, it supports over 300 connected devices and delivers extensive Wi-Fi coverage across up to 140 sq.m. With the integration of Wi-Fi 6E technology, users can experience speeds up to 5.7 Gbps, ensuring smooth streaming, gaming, and downloading across all connected devices.Security is a priority, and the U7 Pro Wall addresses this with advanced encryption protocols including WPA3, alongside features like Guest Isolation and Private Pre-Shared Key (PPSK), safeguarding your network against unauthorized access. Its wall-mountable design, powered by PoE+, offers a sleek, space-saving solution that is easy to install and manage, making it an ideal choice for businesses, educational institutions, and large residential spaces seeking a reliable, high-performance wireless access point.
U7-Outdoor on suure jõudlusega WiFi 6 ja WiFi 7 välipääsupunkt, mis on loodud karmidesse välistingimustesse. Seade on varustatud UV-kaitstud polükarbonaadist ja alumiiniumisulamist korpusega, pakkudes IPX6 ilmastikukindlust ja suurepärast tuulekindlust kuni 200 km/h (125 mph). Paigaldusvõimalused on paindlikud, sealhulgas seintele, lagedele ja postidele, mis teeb selle ideaalseks erinevatesse välistingimustesse.U7-Outdoor toetab kahesageduslikku MIMO-d (2x2) 2.4 GHz ja 5 GHz sagedusaladel, pakkudes maksimaalset andmeedastuskiirust kuni 688 Mbps 2.4 GHz ja 4.3 Gbps 5 GHz sagedusel. Seade on varustatud suunatud sisemise antenni ja väliste omniantennidega, tagades laia leviala kuni 12.5 dBi võimendusega 5 GHz sagedusalal. Toetades üle 200 samaaegset kasutajat, sobib see ideaalselt suure tihedusega keskkondadesse.Seade saab toidet PoE+ kaudu ja maksimaalne energiatarve on 19W. U7-Outdoor ühildub UniFi Network tarkvaraga ja toetab täiustatud turvafunktsioone, sealhulgas WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3), VLAN 802.1Q ja külaliste liikluse isoleerimist. Selle vastupidav disain ja arenenud funktsioonid teevad U7-Outdoorist ideaalse lahenduse kiire ja usaldusväärse internetiühenduse pakkumiseks karmides välitingimustes.
The Ubiquiti UniFi Pro XG 8 PoE delivers network performance, suitable for demanding environments. This switch supports a capacity of 1000 IPv4 routes and 128 ARP entries, allowing seamless connectivity for multiple devices. With eight versatile ports, including 10/100/1000/2.5G/5G/10GBase-T and two 10 Gigabit SFP+ connections, the Pro XG facilitates robust networking solutions. Its PoE budget of 155 W ensures that connected devices receive sufficient power, streamlining installation and management. Designed for reliability, the Pro XG operates within a temperature range of -5°C to 45°C and maintains performance in varying humidity levels of 10% to 90%. The switch incorporates features such as flow control, VLAN support, and quality of service (QoS), enhancing network performance and security. With support for Link Aggregation Control Protocol (LACP) and advanced IGMP configuration, managing larger networks becomes straightforward. The fanless design ensures silent operation, suitable for office or home environments.
The TL-SF1024D Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 24 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
24 10/100/1000Mbps portsInnovative energy-efficient technology saves power up to 20%Supports MAC address self-learning, Auto MDI/MDIX and Auto negotiationPlug & play designThe TL-SG1024D 24-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1024D can save up to 20%* of the power consumption, making it an eco-friendly solution for your business network.
The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. IEEE 802.3af compliant Adjustable output power Plug-and-Play installation
5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
